Page 1
Parts Included
1. Install the Shower Head
Ball Connector
In2ition® Installation Instructions
a.
Turn off water supply before installing the Shower Head.
b.
Remove existing Shower Head from Shower Arm.
c.
Apply plumber tape (not included) to Shower Arm, if necessary,
to stop or prevent leaks.
d.
Hand tighten the Ball Connector of the Shower Head to the
Shower Arm.
Hand Shower
Hose Washer
(2)
Shower Head
Metal Hose
2. Install Hand Shower
Hex Nut
a.
Place the hose washers into the hose nuts on each end
of the hose.
b.
Attach the end of the hose with a hex nut to the
shower head. Connect the other end of the Metal Hose
to the Hand Shower. All connections should be able to
be made by hand tightening only.
To change spray modes, turn the lever (located on the
c.
front of the Hand Shower) left or right to the desired
setting.
3. Insert Hand Shower into Shower Head
a.
b.
a. Slide Hand Shower
into the top of the
Shower Head.
b. Gently push the
Hand Shower
down into the
Shower Head.
• If the Shower
Head moves when
inserting or
removing the
Hand Shower,
hand tighten the
connection
between the
Shower Head and
the Ball Connector.
Control
Knob
2a. Changing Modes From Shower Head, to Hand Shower, or to Both
a.
Turn knob on side of Shower Head to change between:
• Shower Head only
• Shower Head and Hand Shower
• Hand Shower only
4. Removing the Hand Shower from the Shower Head
a.
a.
Push the lower part
of the Hand Shower
b.
upwards, away from
the Shower Head.
Notice: Removal of or tampering with the flow restrictor may result in showerhead failure and will void the warranty.
Backflow Protection
If your product is not equipped with backflow prevention, in order to make your product backflow compliant, a vacuum breaker will need to be added.
WARNING:
pressure variations in the water line and/or changes in the position of shower temperature control handle while in “PAUSE” mode could result in dramatic changes to the temperature of the water when the shower
head or hand shower is returned to the “ON” position.
ALWAYS point the shower head away from yourself when returning to the “ON” position and feel the water with your hand before resuming your shower to ensure the water flow is not too hot or too cold. DO NOT
allow children or others who might not understand this warning to use the “PAUSE” function.
Plumbing Codes require that shower heads and hand showers provide a small but continuous flow of water (trickle) when in “PAUSE” mode. Because of this continuous flow, in certain circumstances
b.
Pull the Hand
Shower away from
the slot in the
Shower Head.
6467 Rev. C07/03/2020
Page 2
Parts and Finish. All parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers
are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer
purchaser owns the home in which the faucet was first installed. For commercial purchasers, (a) the warranty period is ten (10) years for
multi-family residential applications and (b) five (5) years for all other commercial applications, in each case from the date of original purchase.
For purposes of this warranty, the term “multi-family residential application” refers to the purchase of the faucet from an authorized Delta seller
by a purchaser who owns but does not live in the residential dwelling in which the faucet is initially installed, such as in a rented or leased
single unit or multi-unit detached home (duplex or townhome), or a condominium, apartment building or community living center. The following
installations are not considered multi-family residential applications, are excluded from the 10-year warranty and are subject to the 5-year
warranty: industrial, institutional or other business premises, such as a dormitory, hospitality premises (hotel, motel or extended stay location),
airport, educational facility, long- or
public space or common area.
Parts and Finish for Delta
parts (other than electronic parts and batteries) and finishes of these Delta
chaser to be free from defects in material and workmanship for ten (10) years from the date of original purchase. For commercial purchasers,
the warranty period is one (1) year from the date of original purchase.
Electronic Parts. Electronic parts (other than batteries), if any, of Delta
are warranted to the original consumer purchaser to be free from defects in material and workmanship for five (5) years from the date of
original purchase or, for commercial purchasers, for one (1) year from the date of original purchase. No warranty is provided on batteries.
What We Will Do. Delta Faucet Company will repair or replace, free of charge, during the applicable warranty period (as described above),
any part or finish that proves defective in material and/or workmanship under normal installation, use and service. If
is not practical, Delta Faucet Company may elect to refund the purchase price in exchange for the return of the product. These are your
exclusive remedies.
What Is Not Covered. Because Delta Faucet Company is unable to control the quality of Delta products sold by unauthorized sellers, unless
otherwise prohibited by law, this warranty does not cover Delta products purchased from unauthorized sellers.
Any labor charges incurred by the purchaser to repair, replace, install or remove this product are not covered by this warranty. Delta Faucet
Company shall not be liable for any damage to the faucet resulting from reasonable wear and tear, outdoor use, misuse (including use of the
product for an unintended application), freezing water, abuse, neglect or improper or incorrectly performed installation, maintenance or repair,
including failure to follow the applicable care and cleaning instructions. Delta Faucet Company recommends using a professional plumber for
all installation and repair of faucets. We also recommend that you use only genuine Delta
What You Must Do To Obtain Warranty Service or Replacement Parts. A warranty claim may be made and replacement parts may be
obtained by calling 1 800 345 DELTA
original purchase):
short-term healthcare facility (hospital, rehabilitation center, nursing, assisted or staged-care living unit),
®
Recertified Faucets. Delta Faucet Company offers for sale on deltafaucet.com Delta® Recertified faucets. All
(3358) or by contacting us by mail or online as follows (please include your model number and date of
®
Recertified faucets are warranted to the original consumer pur-
®
faucets purchased from deltafaucet.com or authorized Delta sellers
®
replacement parts.
Limited Warranty on Delta® Faucets
repair or replacement
In the United States and Mexico: In Canada:
Delta Faucet Company Masco Canada Limited, Plumbing Group
Product Service Technical Service Centre
55 E. 111th Street 350 South Edgeware Road
Indianapolis, IN 46280 St. Thomas, Ontario, Canada N5P 4L1
Attention: Customer Solutions Attention: Customer Service
www.deltafaucet.com/service-parts/contact-us http://www.deltafaucet.ca/customersupport/assistance.html
Proof of purchase (original sales receipt) from the original purchaser must be made available to Delta Faucet Company for all warranty
claims unless the purchaser has registered the product with Delta Faucet Company or the product is a Delta
from deltafaucet.com. This warranty applies only to Delta
America, Canada and Mexico.
Limitation on Duration of Implied Warranties. Please note that some states/provinces (including Quebec) do not allow limitations
on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHAN
FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER
IS SHORTER.
Limitation of Special, Incidental or Consequential Damages. Please note that some states/provinces (including Quebec) do not allow
the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND DELTA FAUCET COMPANY
SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO
REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE. DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY DAMAGE
TO THE FAUCET RESULTING FROM REASONABLE WEAR AND TEAR, OUTDOOR USE, MISUSE (INCLUDING USE OF THE PRODUCT
FOR AN UNINTENDED APPLICATION), FREEZING WATER, ABUSE, NEGLECT OR IMPROPER OR INCORRECTLY PERFORMED
INSTALLATION, MAINTENANCE OR REPAIR, INCLUDING FAILURE TO FOLLOW THE APPLICABLE INSTALLATION, CARE
CLEANING INSTRUCTIONS. Notice to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are
intended to apply to the fullest extent permitted by the laws of the State of New Jersey.
Additional Rights. This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/
province.
This is Delta Faucet Company’s exclusive written warranty and the warranty is not transferable.
If you have any questions or concerns regarding our warranty, please contact us as provided above or view our Warranty FAQs at www.
deltafaucet.com.
®
faucets manufactured after January 1, 2019 and installed in the United States of
®
Recertified product purchased
TABILITY AND OF FITNESS
AND
© 2020 Delta Faucet Company
Cleaning and Care
Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean,
simply wipe gently with a damp cloth and blot dry with a soft towel.
Limpieza y Cuidado de su Llave
Tenga cuidado al limpiar este producto. Aunque su acabado es sumamente durable, puede ser afectado por agentes de limpieza o para pulir
abrasivos. Para limpiar su llave, simplemente frótela con un trapo húmedo y luego séquela con una toalla suave.
Instructions de nettoyage
Il faut le nettoyer avec soin. Même si son fini est extrêmement durable, il peut être abîmé par des produits fortement abrasifs ou des produits de
polissage. Il faut simplement le frotter doucement avec un chiffon humide et le sécher à l’aide d’un chiffon doux.
6467 Rev. C07/03/2020
Loading...