VICTORIAN GRAB BAR
16", 18", 24" GRAB BAR
2 1/8"
[54.0 mm]
REF
MATERIALS: Grab bar is constructed using 1-1/4" diameter 20 gauge 304 stainless steel tubing.
Decorative posts and trim rings are cast in zinc. Trim rings are held in place using a
friction fit. Meets ADA and ANSI A117.1-2003 for form and load bearing
requirements.
INSTALLATION: Install grab bar with 3 - #10 x 2-1/2” flat head stainless steel screws provided for
each end wall flange. Slide cover flanges over wall flanges and press firmly to
complete installation.
OPTIONAL FASTENER INFORMATION:
Wall studs or Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested: Non-Stud Wall anchor.
[457.2 mm]
LENGTH
16"
18"
24"
18"
"A"
A
(Total length)
18 3/4"
(476.3 mm)
27 1/32"
(686.6 mm)
26 3/4"
(679.5 mm)
1 1/2"
[38.1mm]
(Height)
2 31/32"
(75.6 mm)
2 31/32"
(75.6 mm)
2 31/32"
(75.6 mm)
"B"
"C"
B
C
(Post Base
Diameter)
2 23/32"
(69 mm)
2 23/32"
(69 mm)
2 23/32"
(69 mm)
SPECIFICATION: Surface mounted Grab Bar shall be model__________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
Loading...