Delta DLT6579 Specifications

Model No: T13H152

SPECIFICATION:

•

Polished chrome plated finish - Pressure Balance cartridge - Temperature

only controlled with handle - Field adjustable to limit handle rotation into hot

water zone

•

Integral checks in the cartridge prevent crossflow between Hot and Cold

water inlets

•

Non-Removable Blue/Red visual cover indicator for Cold, Mixing and Hot

handle positions

•

Handle#: 2 - Metal Lever Handle – ADA compliant - 85mm (3.33")

•

#5 Shower - Handshower with standard 24" (610mm) Stainless Steel Slide

Bar

•

#5 Shower MAX: 1.5 GPM @ 80 PSI (5.7 L/min @ 552 kPa)

•

#5 Shower MIN: 1.13 GPM @ 45 PSI (4.3 L/min @ 310 kPa)

COMPLIES WITH:

•

ASME A112.18.1 / CSA B125.1

•

Pressure Balance Valve ASSE 1016

•

Indicates compliance to ICC/ANSI A117.1

•

Pressure Balance lever handle ADA compliant to ICC/ANSI A117.1/ADA

•

Handshower backflow protection provided by two integral certified check

valves in series, which operate independently, ASME A112.18.3\n

Handshower ADA compliant to ICC/ANSI A117.1/ADA\n

•

(Contact Delta Representative for State and/or Local Approvals)

(Dimensional drawing on following page)

•

NOTE FOR SHOWER #6: Not for use as anti-ligtature device.

•

PAUSE WARNING – FOR #5 Shower (handshower) and OPTIONAL

Handshower #2

Plumbing Codes require that showerheads and handshowers provide a

small but continuous flow of water (trickle) when in “PAUSE” mode.

Because of this continuous flow, in certain circumstances pressure

variations in the water line and/or changes in the position of the shower

temperature control handle while in “PAUSE” mode could result in dramatic

changes to the temperature of the water when the shower head or hand

shower is returned to the “ON” position.

ALWAYS point the shower head away from yourself when returning to the

“ON” position and feel the water with your hand before resuming your

shower to ensure the water flow is not too hot or too cold.

DO NOT allow children or others who might not understand this warning to

use the “PAUSE” function.

OPERATION:

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]

Tub and Shower

TRIM ONLY for Single shower Unit Requires separate
order of R10000-UNWS Rough-in

Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced May 14, 2015.

Page of1 2

Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]

Model No: T13H152

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]

Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced May 14, 2015.

Page of2 2

Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]