Delta CBKB1597 Installation & Assembly
Page 1 of 2
Cutting Die
8/7/2018
34.5”
5.75”
Rev ECO/EN# Completed By Details/Description
A
B
C
MASCO CORPORATION
PLUMBING PRODUCTS DIVISION
THIS DOCUMENT AND ALL THE DATA IT CONTAINS IS THE SOLE AND EXCLUSIVE PROPERTY OF DELTA FAUCET COMPANY, DIVISION OF MASCO
CORPORATION OF INDIANA AND SHALL NOT BE DISCLOSED TO OTHERS WITHOUT THE EXPRESS CONSENT OF DELTA FAUCET COMPANY.
COPYRIGH T © 2018 MASCO C ORP. of INDIANA
MATERIALS
Do Not Scale, All Dimensions in Inches (Millimeters)
Fractional Tol ±1/8" (± 2 mm) unless specified otherwise
For reference only, not for reproduction purposes.
OUTSIDE DIMENSION
80# silk cover
5.75” x 34.5”
LINE TYPE
BROKEN
FOLDING
REVERSE
. . . . . . .
MATERIAL SIZE
CUTTING DIE #
XXXXX
SCALE
(”2:5”)
JOINT METHOD
none
Notes Section:
BOXES PER TIER
XXXXX
CREATE DATE
4/10/19
PART DESCRIPTION
Marketing Insert
BOXES PER PALLET PART NET WEIGHT
XXXXX
PREPARED BY
E. Weartz
PART NUMBER REV. PAGE
XXXXX
APPROVED BY
SR
A 1 of 2104180
Page 2 of 2
10.10.10.1
device.deltafaucet.com
Graphics Page
8/7/2018
Take command of
your kitchen with a
voice-activated faucet
that works smarter.
104180 Rev. A 03/12/2019
BEFORE YOU BEGIN. NOW, LET’S GET STA RTED.
These instructions begin with an installed Delta Touch20® faucet*. If you
have not installed your faucet yet, please follow the instructions for fau cet
installation prior to installing your Delta VoiceIQ™ Module. You will also
need a smartphone or tablet and the following to complete the set-up:
A POWER SOURCE.
Under the sink. Not
controlled by a switch.
Before you begin, remove the batteries from the battery pack of
your Delta Touch2O® faucet.
If you need installation or troubleshooting assistance,
visit DeltaFaucet.com/VoiceIQ.
A CONNECTED
HOME DEVICE.
Amazon® Alexa® or
Google® Assistant.
A HOME WI-FI SYSTEM.
And your login
information.
* manufactured after 01/01/18
1 32 4
STEP 1:
water supply.
STEP 2: Remove the plastic
clip from the bottom of your
existing solenoid.
STEP 3: Remove the hose by
gently pulling it downward.
ACCESS THE WEB PAGE. VOICEIQ™ MODULE LED COLOR INDICATORS TROUBLESHOOTING TIPS
Connect your smartphone or tablet to your VoiceIQ™
Module’s Wi-Fi signal, “Delta-ABC.” Your VoiceIQ™
Module will have a unique identifier in the Wi-Fi
network name, shown here as “ABC.”
Be sure to disconnect your your smartphone or
tablet from cellular data. Open a browser and enter
the URL 10.10.10.1 for product setup. Follow the steps
on screen.
Bookmark device.deltafaucet.com for easy access
to the Web page, where you can see settings, FAQs,
and a list of voice commands.
Look for this on your VoiceIQ™ Module under the sink, not at the faucet base.
BLINKING GREEN
Wi-Fi setup mode: indicates the VoiceIQ™ Module is trying to connect
t
o Wi-Fi. If blinking continues for more than 3 minutes, you may need
to reconnect it to your home Wi-Fi.
BLINKING RED
Blinks once every 5 seconds. This indicates that the required
AC power is not connected.
SOLID GREEN
This indicates a successful connection to Wi-Fi.
SOLID RED
This indicates an interrupted or failed Wi-Fi connection.
If your VoiceIQ™ Module is blinking a red light every 5 seconds, there is an issue
with your power supply. Verify that the outlet you’ve plugged your module into
isn’t connected to your garbage disposal switch by plugging something else into the
outlet (lamps and other lights work best, but anything that lights up or makes noise
and doesn’t have a backup battery will work), then switching your garbage disposal
switched on, your outlet is connected to your garbage disposal and isn’t compatible
with your VoiceIQ™ Module.
If you can’t locate DELTA-ABC on your list of available Wi-Fi networks, check for a
flashing green light on your VoiceIQ™ Module under the sink. If the ligh t is blinking
green, re-scan for Wi-Fi networks on your mobile device. If the light is blinkin g red,
see the above troubleshooting tip about power supply.
If the VoiceIQ™ Module setup page fails to load on your mobile device after entering
10.10.10.1, check the following:
a. If the LED light on your VoiceIQ™ Module is blinking green, it’s still in Wi-Fi
setup mode. Re-scan for Wi-Fi networks on your mobile device and connect to
“ABC” is used here to mark your module’s unique identifier code).
“Delta-ABC” (
b. If the LED light on your VoiceIQ™ Module is blinking red, it isn’t connected to
a power source. See the first troubleshooting tip listed above.
c.
the webpage.
STEP 4: Slide the new VoiceIQ™
Module unit onto the bottom of
your existing solenoid.
5 6
STEP 5: Swivel the retainer clip
upward and click it into place.
If the device fails to connect after entering Wi-Fi network name and password and
the LED on the VoiceIQ™ Module is solid red, check the following:
a. Double-check that your Wi-Fi password was entered correctly.
b. The VoiceIQ™ Module works with 2.4 GHz Wi-Fi. If your router has both 2.4 GHz
and 5.0 GHz, make sure you use 2.4 GHz. When scanning fo r Wi-Fi networks on
your mobile device, only the 2.4 GHz network will appear.
QUESTIONS?
We’re here to help. You’ll find a full list of frequently asked questions at
device.deltafaucet.com. You’re also welcome to call our customer solutions
line at 877-652-8151.
For warranty information, visit
DeltaFaucet.com/service-parts/warranty.
VoiceIQ™ Module for Delta® Touch2O® Faucets manufactured after 01/01/2018
STEP 6: Slide the hose onto the
VoiceIQ™ Module and secure it
with the retaining clip.
7 8
STEP 7: Connect the ethernet
cable to the VoiceIQ™ Module
and the existing solenoid.
* in case of power outage, touch activation
will revert to battery power.
STEP 8: Connect the power supply to
the solenoid and to an outlet that is
not controlled by a switch. Reinstall
Touch20® solenoid batteries.* Turn on
water supply and continue set up.
VOICEIQ
TECHN OLO GY
QUICK SETUP G UIDE
™
Notes Section:
COLOR #1 COLOR #2 COLOR #3 COLOR #4
BLACKYELLOWMAGENTACYAN
COLOR #5 COLOR #6
-PMS 200 C
COATING
Coating
Aqueous Silk
PRINTING
-
PAGE
2 of 2
Loading...