DeLonghi WF1300, WF1500 User Manual INTRO
WET-DRY VACUUM CLEANER
ASPIRATEUR POUSSIÈRES ET LIQUIDES
NASS-TROCKEN-SAUGER
ALLESZUIGER
ASPIRADORA POLVO –ASPIRADORA LÍQUIDOS
ASPIRADOR DE PÓ E LÍQUIDOS
∏§∂∫∆ƒπ∫∏ ™∫√À¶∞ À°ƒø¡/™∆∂ƒ∂ø¡
TAKARÍTÓGÉP
èèõõããÖÖëëééëë ÑÑããüü ëëììïïééââ àà ÇÇããÄÄÜÜççééââ ììÅÅééêêääàà
MOKROSUCH¯ VYSAVAâ
ODKURZACZ SSÑCO-PIORÑCY
GHF{JCVERFXRF - FGFHFN PF BPCVERDFYT YF NTXYJCNB
ASPIRATOR DE PRAF – ASPIRATOR DE LICHIDE
Operating instructions
Instructions d'utilisation
Bedienungsanleitung
Gebruiksaanwijzingen
Instrucciones para el uso
Manual de Instruções
√‰ËÁ›Â˜ ¯Ú‹Û˘
Kezelési utasítás
ààÌÌÒÒÚÚÛÛÍ͈ˆËËflfl ÔÔÓÓ ˝˝ÍÍÒÒÔÔÎÎÛÛ‡‡ÚÚ‡‡ˆˆËËËË
Návod k pouÏití
Instrukcja obs∏ugi
Erfpfybz pf egjnht,f
Instrucţiuni de folosinţă
Intro 14-10-2002 9:55 Pagina 1
ELECTRICAL CONNECTION (U.K. ONLY)
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug
should be cut off from the mains lead, and an appropriate plug fitted, as below. Warning: Very carefully dispose of
the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause
a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the
plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved
fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can
be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is as marked on the
base of the plug.
B) If your appliance is not fitted with a plug, please follow the instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Green and yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in the plug marked with the letter E or the earth
symbol or coloured green or green and yellow.
The blue wire must be connected to the terminal marked
with the letter N or coloured black.
The brown wire must be connected to the terminal marked
with the letter L or coloured red.
N
E
L
Intro 14-10-2002 9:55 Pagina 2
Loading...