Delonghi TRRS0715E Instruction manuals

TRRS0715E-6A

OIL FILLED RADIATOR

Instructions for use. Keep these instructions

Visit www.delonghi.com for a list of service centers near you.

ELECTRIC CHARACTERISTICS

120 V~ 60 H z 1500 W

RADIATEUR ÉLECTRIQUE À BAIN D’HUILE

Mode d’emploi . Conservez cette notice

Visitez www.delonghi.com pour y voir une liste des centres de réparation proches

de chez vous.

CARACTÉRISTIQUES ÉLECTRIQUES

120 V~ 60 H z 1500 W

RADIADOR ELÉCTRICO DE BAÑO DE ACEITE

Repase y guarde estas instrucciones.

Lea cuidadosamente este instructivo antes de usar su aparato.

Visite www.delonghi.com para ver la lista de centros de servicios cercanos a

usted.

CARACTERISTICAS ELECTRICAS:

120 V~ 60 H z 1500 W

EN

page 4 page 9 page 14

FR

ES

2

A

B

C

D

E

F

G

H

I

3

IMPORTANT
SAFEGUARDS

When using any electrical appliance, some basic safety pre­cautions should always be observed to reduce the risk of re,
electric shock, and/or injury to persons. Read all instructions
carefully before using the appliance. Specically:

Danger!

Failure to observe the warning may result in life threatening
injury by electric shock.

- Do not operate any heater with a damaged
cord or plug or after the heater malfunctions,
has been dropped or damaged in any manner.

If heater has leaked any oil, discontinue using

the heater and contact the service centre as
indicated in the instruction leaet. Return he­ater to authorized service facility for examina­tion, electrical or mechanical adjustment, or
repair.

- This heater is not intended for use in bathro­oms, laundry areas, or similar indoor loca­tions. Never position the appliance where it
may fall into a bathtub or come in contact
with water.

- Use this appliance only as described in this
manual. Any other use not indicated by the
manufacturer may cause re, electric shock,
or injury to persons.

- CAUTION: To prevent electric shock, make sure
the wide prong of the plug is inserted in the
wide slot of the outlet.

Important!

Failure to observe the warning could result in injury or
damage to the appliance.

- The appliance is not intended for use by per­sons (including children) with reduced physi­cal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concer­ning use of the appliance by a person respon­sible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

- Extreme caution is necessary when any hea­ter is used by or near children or invalids and
whenever the heater is left operating and
unattended.

- Do not wrap the cord around the appliance
immediately after use.

- To prevent current overload and blown fuses,
make sure that no other appliance is plugged
into the same outlet or into another outlet
wired into the same circuit.

- If the power cord is damaged, to reduce the
risk of malfunction it must be replaced by the
manufacturer, its service agent, or a licensed
and qualied professional.

- Do not use this appliance with an extension
cord or outlet strip. Connect the appliance di­rectly to a suitable outlet.

Danger of burns!!

Failure to observe the warning could result in burns or scalds.

- This appliance gets very hot when in use. To
prevent burns, do not touch hot surfaces with
bare skin. Use the handle when moving the
appliance. Keep all ammable materials, such
as furniture, pillows, bedding, paper, clothing,
and curtains at least 3 feet (90 cm) from the
front and top of the appliance, also avoid con­tact with the sides and back.

- Do not run the power cord under carpeting.
Do not cover cord with throw rugs, runners, or
the like. Keep the cord away from any passa­geways where it could be tripped over.

- Do not insert or allow foreign objects to get
into the air intake or air outlet grille, as this
may cause electric shock or re, or damage
the appliance.

- To prevent a possible re, do not block air in­take or air outlet grille in any way. Do not use
the appliance on soft surfaces, such as beds,
where the openings may become blocked.

- Do not cover the appliance while it is functio­ning in order to avoid overheating and the risk
of re.

- The internal parts of the appliance can beco­me very hot or produce sparks during opera-

4

tion. Do not use the appliance in areas where
gasoline, paints, or other ammable liquids
are used or stored.

- It is normal for heater’s plug and cord to feel
warm to the touch. However, an excessively
hot or deformed plug or cord is not normal
and may be the result of a defective electri­cal outlet. Defective outlets must be replaced
before using the heater. Plugging the heater
into a worn outlet may result in overheating
of the power cord or may cause the risk of re.

- Do not place the heater near a bed because
objects such as pillows or blankets can fall o
the bed and be ignited by the heater.

Please note:

This symbol indicates recommendations and important
information for the user.

- If your radiator is equipped with a polyethyle­ne tape used as a carry handle, remove it be­fore connecting appliance to the outlet.

- Always disconnect the plug from the power
outlet when the appliance is not in use.

- Do not use the appliance outdoors.

- To completely turn o the appliance, push the
ON/OFF button, and then unplug the heater.

- Connect to properly polarized outlets only.

- Make sure that the plug is fully inserted into
the outlet. Wall outlets may deteriorate with
time, so check the plug periodically for signs
of overheating or deformation. If the outlet
has deteriorated, stop using it and have it re­paired.

- Check that neither the appliance nor the po­wer cord have been damaged during ship­ping.

- Make sure that no styrofoam or other packing
materials remain in the appliance.

- Make sure that no pieces of polystyrene or
other packaging material have been left
between one element of the appliance and
another. It may be necessary to pass over the
appliance with a vacuum cleaner.

- The rst time the appliance is used, run it at
the maximum power for at least two hours.

During this time, ventilate the room thorou­ghly to eliminate the “new” smell released by
the appliance. It is completely normal for the
appliance to emit “creaking” sounds the rst
time it is run.

- Extreme caution is necessary whenever the
heater is left operating unattended.

- Do not open the appliance. No user-servicea­ble parts inside.

SAVE THESE

INSTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE

ONLY

DESCRIPTION

A display
B on-standby button
C increase button
D decrease button
E power button
F eco button
G timer button
H cord holder
I wheel

USE
"Easy wheel" system

Turn the radiator upside down on a rug or a soft surface in
order to prevent damaging the paint nish.
Fully unfold the wheels by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.

Fig. 1

Location

The heater must not be placed immediately below a power
outlet. Do not use this radiator in rooms having a surface area
of less than 43 square feet (4 sq.m.).

Power connection

- Before using the appliance check that your supply

5

voltage is the same of that shown on the rating label
of the unit and that the power socket and power supply
line correspond to the load specied.

- Check also the current capacity of your fuses. CONNECT
YOUR HEATER TO EARTH PROVIDED SOCKET ONLY.

Plug in the heater, the appliance will be set in the stand­by condition. The display will show the symbol. Keep
loose clothing or bedding, furniture and ammable material
away from the power outlet where the heater is plugged in.
After an interruption of the power supply (power failure or
appliance unplugged) the unit goes always to stand-by.

Heating function

To turn the appliance on, press the (B) button.
Press button (E) to set the required power level:
MIN ( ); MED ( ); MAX ( ) (see g. 2). To
select the desired temperature, press button + or - (C or D).
By pushing the + or - button once, the temperature (shown
on the display) will increase or decrease by 34°F (1°C).
Keeping the + or - button depressed the value will increase
o decrease rapidly.

Fig. 2
The appliance allows to set the temperature from 41°F (5°C)
to 82°F (28°C).

Anti-freeze function

Setting the temperature to 41°F (5°C) with the "-" button,
the appliance will activate the Antifreeze function.
The display will show the symbol, in this way the appliance
will turn on automatically, at the max power, only if the room
temperature falls below 41°F (5°C).
If you wish to go back to the Heating function, press the
"+" button once. After an interruption of the power supply
(probe failure or appliance unplugged) the unit goes always
to stand-by.

is much higher than the actual room temperature, the
appliance will start automatically and rapidly to heat the
room.
The appliance will automatically select the most convenient
power level (MAX-MED-MIN-OFF).
If MAX power level has been selected using the
button, the appliance will cycle between: MAX-MED-MIN-

OFF.

If MED power level has been selected, the appliance will cycle
between: MED-MIN-OFF.
If MIN power level has been selected, the appliance will cycle
between: MIN-OFF.

Working indicator

The symbol indicates the heating status by means of its
colors.

RED: the unit is heating at the maximum power.
ORANGE: the unit is heating at the medium power.
GREEN: the unit is heating at the minimum power.
absent: the unit is not heating.

Key lock

In order to avoid accidental operation, you can lock the
keyboard using the keylock function. To activate this function
during on mode, press buttons + and - together for at least
3 seconds. The display shows the symbol and a double
acoustic signal will be emitted. To disactivate the function
proceed in the same way.

Timer function

This function can be activated in two dierent ways.
Delayed start: With the appliance in standby mode, press
the timer button (G) . The hours left before the appliance
comes on is displayed together the symbol and "h"
symbol ashing (see g. 3). Change the hours using the +
and - buttons, then wait a few seconds for the program to
be stored. The display will return to o and the symbols
remains on. When the programmed time has elapsed, the
appliance will come on with the previous settings.

Eco function

When this function is active the appliance automatically sets
the most appropriate power level to guarantee optimum
comfort while reducing energy consumption.
To activate this function press the "ECO" (F) button. The
display will show symbol. If the selected temperature

Fig. 3

Delayed stop: with the appliance on, press the timer button

6