Delonghi KBX 2010, KBX 3010 Instructions Manual [it]

9

IMPORTANT WARNINGS

- After removing the packaging, make sure the appliance
is complete and undamaged. If in doubt, do not use the
appliance and only contact qualified personnel.

- The plastic bag in which the appliance is packaged
should be kept out of the reach of children, as it is a
potential source of danger.

- If the plug fitting to the appliance does not match the
power outlet, have the outlet replaced with one that is sui­table by qualified personnel. It is not recommended to
use adapters, multiple jacks, and/or extension cords. If
such accessories are required, only use single or multiple
adapters and extension cords that conform to the safety
standards in force.

- Models with an earth must be connected to an efficient
earth installation as specified in current electrical safety
regulations.

- In the event of break down, contact an authorized servi­ce centre only.

- The appliance must be used exclusively for the purpose
for which it was expressly conceived. All other use is con­sidered incorrect and thus dangerous.
The manufacturer cannot be held responsible for any
damage caused by inappropriate, improper or irrespon­sible use and/or for repairs made to the product by
unqualified personnel.

- Make sure the hands, hair, clothing and kitchen utensils
are clear of the container before starting the appliance.

The blades may cut: handle them with care.

Special attention must be paid to the following fundamen­tal safety standards:

- Never touch the appliance with damp or wet hands.

- Never use the appliance with bare or wet feet.

- Never unplug the appliance by pulling the power cable.

- Protect the appliance from atmospheric agents (rain, frost,
sun, etc).

- Never allow the appliance to be used by children or unfit
persons without surveillance.

- Never allow children to play with the appliance.

- Unplug the appliance from the mains socket when not in
use.

- Never leave the appliance on for longer than necessary
as it represents a potential source of danger.

- Never immerse the appliance in water.

- If the cable is damaged, have it replaced immediately by
a qualified electrician.

- Before cleaning or maintenance, unplug the appliance
from the mains socket.

- If the appliance breaks down or malfunctions, turn it off.

- If it requires repair, contact a qualified service centre
only and ask for only original spare parts and accesso-

ries to be used.

- In the event of damage to the power cable or the applian­ce itself, immediately unplug the appliance from the
power outlet .

- To prevent the risk of danger, damaged power cables
must only be replaced by the manufacturer or an autho­rised agent.
Do not try under any circumstances to open and/or
repair the appliance alone.
Contact our service centre or an authorised agent.

- If the appliance is to be disposed of definitively, after
unplugging from the mains socket, you are recommended
to remove the power cable.

- The appliance is fitted with a safety device preventing it
from being turned on unless the bowl and cover are cor­rectly positioned and hooked into place.
The universal cutter (D1) and double cutter (D2 – models
KR750 and 1000 only) are extremely sharp. Always
handle from the grip side. To store the cutters outside the
appliance, use the special guards (D3). Remove the guard
before using the cutters.

- Avoid all contact with moving parts.

- Open the bowl and/or blender only when the motor is
stationary.

- To push the food to be processed through the hole in the
cover, use the feeders provided only. Never use the fingers
or other objects!

- Use the appliance to process food in quantities for normal
domestic use only.

- Never exceed the times and quantities indicated in the
instructions.
NEVER use hot food!

- Keep these instructions carefully for future consultation.

The materials and objects that come into contact with food­stuffs comply with the provisions of the EEC directive
89/109.

READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE

GB

GB 1-10-2003 14:23 Pagina 9

10

A. Motor assembly

A1 Safety cover (model KR750/1000 only)
A1 Accessory compartment cover (model

KR650 only)

A2 Safety cover release button
A3 Motor unit
A4 Motor shaft
A5 ON/OFF knob + speed regulator
A6 Pulse operation button

B. Mixer bowl components

B1 Feeder for bowl
B2 Cover for bowl
B3 Bowl

C. Blender components (model KR750/1000

only)
C1 Blender cover cap
C2 Blender cover
C3 Blender

D. Accessories for bowl

D1 Universal cutter
D2 "Double cutter" (model KR750/1000 only)
D2 Universal and double cutter guard (KR

750/1000 only)

D3 Mixer accessory
D4 Whisk accessory

E. Cutters for slicing/grating

E1 Cutter holder disk
E2 Thin slicer
E3 Thick slicer
E4 Grater
E5 Fine shredder
E6 Coarse shredder
E7 Cutter for French fries
E8 Cutter holder accessory (model

KR750/1000 only)

E9 Cutter holder cover (model KR750/1000

only)

F. Separator components (if provided)

F1 Separator feeder cover
F2 Separator cover
F3 Separator filter
F4 Separator

G. Spatula

BEFORE USE

Before using the appliance for the first time, wash
all accessories including the bowl "B3", the blender
"C3", the cover and feeder in hot water and
washing up liquid.

•Never immerse the motor unit in water or other
liquids.

• Important! The universal cutter, double cutter
(model KR750/1000 only), slicer and shredder
blades are very sharp. Handle with care.

During the first few minutes of use, there may be a
slight smell. This disappears rapidly and does not
represent a health hazard.

IMPORTANT: MODELS KR750 AND 1000

• To use the bowl "B3", the safety cover "A1"
must always be closed. To open the safety cover

"A1", press the cover release button "A2" (Fig.

1).

• To use the blender, the bowl and cover "B2"

must be correctly positioned.

• Before using the blender, remove all accessories
from the bowl "B3".

• Never use the blender "C3" and the bowl "B3"
at the same time.

•Avoid damaging the cover safety device "C1"
and the bowl cover closure device "B2".

CONTROLS

Tur ning on: turn the ON/OFF + speed regulator

knob "A5" to one of the positions available as
required. The speed can also be varied during ope­ration.

Tur ning off: turn the ON/OFF knob + speed regu­lator "A5" to the "O" position.

Pulse operation: press button "A6". The appliance
operates until the button is released.

USING THE BOWL "B"

• Place the appliance on a dry flat surface.
DO NOT PLUG THE APPLIANCE INTO THE MAINS
UNTIL ALL ACCESSORIES HAVE BEEN CORRECTLY
FITTED.

•Turn the appliance off before changing accessories.
Avoid contact with moving parts while the appliance

DESCRIPTION OF THE APPLIANCE

GB 1-10-2003 14:23 Pagina 10