Delonghi KBH 1501 Instructions Manual
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
•
READ ALL INSTRUCTIONS.
•
Do not touch hot surfaces. Use handles or dials.
•
To protect against fire, electric shock and injury to persons do not immerse cord, plug in water or other
liquid.
•
Close supervision is necessary when any appliance is used by or near children.
•
Unplug from outlet when not in use and before cleaning. Allow to cool before inserting or removing
parts and before cleaning the appliance.
•
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or
has been damaged in any manner. Return appliance to the nearest authorized service facility for
examination, repair or adjustment.
•
The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
•
Do not use outdoors.
•
Do not let cord hang over edge of table or counter, or touch hot surfaces.
•
Do not place on or near a hot gas or electric burner, or in a heated oven.
•
Do not use the kettle for any purpose other than heating water. Do not place any utensils into the kettle.
•
To disconnect, move the ON/OFF switch up, then remove the plug from the wall outlet.
•
After unpacking the appliance, be sure to dispose carefully of the plastic bags so that children or the
infirm cannot reach them.
•
Ensure that your mains supply voltage is the same as that marked on the underside of your kettle.
•
Take care when pouring - do not over-fill the kettle as water may enter into the switch mechanism.
•
Do not allow the mains lead to hang over the edge of the table or work surface, or anywhere it may
be accidentally caught or tripped over.
•
Remove the kettle from its power base before filling.
•
Never move the kettle while it is in use.
•
Do not use the kettle if you have wet hands.
•
Position the kettle properly on the power base before switching on.
•
Use the kettle properly on the power base before switching on.
•
TO PREVENT SCALDING:
• Never use the kettle without its lid.
• Do not remove the lid while the kettle is boiling.
•Water can remain hot for a long time after boiling and can present a scalding hazard. Keep the
kettle and the mains lead away from the edge of the work surface and out of the reach of children,
do not remove the lid until the kettle is cool down.
• The power cable must not be replaced by the user, as this requires the use of special tools.
If the power cable is damaged, contact an authorized Service Centre.
•
If the kettle is overfilled, boiling water may overflow.
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
3
SHORT CORD INSTRUCTIONS
•A short power cord is provided to reduce risks resulting from becoming entangled in or
tripping over a longer cord.
• Longer, detachable power supply cords or extension cords are available and may be used
if care is exercised in their use.
• If an extension cord is used, the marked electrical rating should be at least as great as the
electrical rating of the appliance. If the appliance is provided with 3- wire, grounding type
cord, the extension should be a GROUNDING TYPE 3 - WIRE CORD. The longer cord should
be arranged so that it will not drape over the counter-top or table top where it can be pulled
on by children or tripped over.
•Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
BEFORE USE
• Remove all packaging from the kettle and power base.
• Remove any labels from the outer stainless steel surfaces.
• Remove the filter (fig. 1) and wash with water (fig. 2). Refer to page 7. “Removing the scale
filter”
• Fill the kettle and boil.
• The boiled water should be discarded and the kettle rinsed out with cold water. This
procedure should be carried out three times, to remove any manufacturing dust, etc.
• After the kettle has been rinsed out, re-fit the filter (fig. 3).
IN USE
Power base with 360° access
With the specially designed power base and central connector,
you can now set the kettle on the base at any angle, from any
position.
• Release cord from storage base and adjust length by
winding around the base to give the correct cord length to
reach the plug socket to be used (fig. 4).
• Do not leave loose cord hanging over the edge of work
surfaces.
4
a
b
1
2
a
b
3
4
Loading...