De'Longhi GB-5748008800 Owner's Manual

Air always contains a certain amount of water in the air in the form of water vapour.

This amount of moisture is commonly known as the humidity.

The capacity of the air to hold water vapour increases with the temperature. This is why in our
homes, as soon as the temperature decreases, the vapour contained in the air condenses, as
is evident on the colder surfaces in the room, such as the windows, walls etc.

The purpose of a dehumidifier is to remove the excess moisture from the air, to control con­densation within the home.
Experts have established that the optimum environmental conditions for our well being and
preserve objects are obtained between 40% and 60% relative humidity. Below these levels the
air can feel too dry and may cause skin complaints and even static electric shocks.

If temperatures in the home are lower than 10°C for prolonged periods low level heating will
be necessary to allow the condensate to evaporate into the air before dehumidification can
take place. The air will however be slightly warmed by the dehumidifier as the dry air leaving

the dehumidifier is about 1°C higher than normal room temperature.

12

Important

ENGLISH

13

Description/Accessories

model DEC12

2

1

1. Control panel

2. Control panel cover

3. Air outlet grille

4. Condensate collection tank

5. Lifting handle

6. Air intake grille

7. Electrostatic filter (some models only)

8. Air filter

Accessory

4

6

3

7

5

8

Accessory

condensate drain hose (2 m.) (some models only)

rubber bung

model DEC18

14

Important

• Use this appliance only as described in this instruction manual.
As with any electrical appliance, whilst the instructions aim to cover as many eventualities as possible cau­tion and common sense should be applied when operating and installing this air conditioner.

• This appliance is designed to dehumidify domestic rooms and must not be used for other purposes.

• In the case that the power cable becomes damaged, this must be substituted only by specialised person­nel authorised by the manufacturer.

• It is dangerous to modify or alter the characteristics of the appliance in any way.

• If the appliance requires repair, always contact a Technical Service Centre authorised by the manufactu­rer. Always insist on original spare parts. Repairs carried out by unauthorised personnel may be dangerous
and invalidate the guarantee.

• This appliance must be used exclusively by adults. Do not allow children to play with the appliance.

• The appliance must be connected to an efficient earth installation. Have your electrical circuit checked by
a qualified electrician.

• Do not use extension power cables.

• Before cleaning or maintenance operations, always unplug the appliance from the mains.

• Do not move the appliance by pulling the power cable.

• Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sources of heat.

• Do not use the appliance on inclined surfaces.

• Keep the unit at least 50 cm away from inflammable substances (alcohol etc) or pressurised containers (eg.
aerosol cans).

• Do not rest heavy or hot objects on top of the appliance.

• Clean the air filter regularly.

• Always transport the appliance upright or resting on one side. Remember to drain the tank before moving
the appliance. Wait at least 1 hour after transporting the appliance before starting it

• R134a is a refrigerant that complies with the EEC environmental standards; nonetheless, the refrigerant cir­cuit on the machine should not be perforated. At the end of its working life, consign the appliance to a spe­cial collection centre.

• The materials used for packaging can be recycled. You are therefore recommended to dispose of them in
special differentiated waste collection containers.

• The appliance must be installed in conformity with the relevant national legislation.

•Do not use the appliance outdoors.

• Do not obstruct the air intake or outlet.

Technical assistance

Keep the list of Technical Service Centres and identify the Centre nearest you.

Electrical connections

After moving the appliance, wait at least an hour before turning it on again.

Before plugging the appliance into the power socket, check that:

• The mains power supply corresponds to the power supply indicated on the rating plate.

• The power socket and electrical circuit are adequate for the appliance.

• The power socket matches the plug. If this is not the case, have the plug replaced by a qualified elec­trician;

• The power socket must be adequately earthed;
Failure to respect this safety rule absolves the manufacturer from all liability.
This appliance is manufactured in compliance with EEC standard EN 55014 on the suppression of radio
interference.

• The cable must be replaced by approved service personnel only.

Important