DeLOCK Wallmount Gigabit PoE-splitter, 1x RJ-45, PoE+ PD User Manual

Delock Gigabit PoE+ Splitter 802.3at

Description

This Power over Ethernet Splitter by Delock can supply
power to a non-PoE-enabled device, such as an IP camera
or a WLAN access point. The splitter is connected to the
network cable and powered by a PoE injector (PSE). The
DC jack provides an adjustable voltage of 5 V / 7.5 V / 9 V
or 12 V with a maximum of 2 A for the connected
equipment. Simultaneously, a 1 Gb/s Ethernet connection
is available. The compact size and integrated wall
mounting enable space-saving installation.

Specification

• Connector:
1 x RJ45 female (Data + Power In)
1 x RJ45 female (Data Out)
1 x DC female 5.5 x 2.1 mm (Power Out)

• Output Power: DC 5 V / 7.5 V / 9 V / 12 V (selectable), 2.0 A max.

• Data transfer rate up to 1 Gb/s

• LED indicator (power, selected voltage)

• Supports IEEE802.3at (PoE+) and 802.3af (PoE)

• Wall mounting integrated in the housing

• Power consumption: max. 2 W

• Operating temperature: 0 °C ~ 45 °C

• Dimensions (LxWxH): ca. 78 x 72 x 27 mm

Item No. 87657

EAN: 4043619876570

Country of origin: Taiwan, Republic of
China

Package: White Box

Specification of the power jack

• Ground outside, plus inside

• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9 mm

Package content

• PoE Splitter

• DC cable 5.5 x 2.1 mm male > 5.5 x 2.1 mm male ca. 30 cm (black)

• DC cable 5.5 x 2.1 mm male > 5.5 x 2.5 mm male ca. 30 cm (red)

• User manual

Images

Powered by TCPDF (www.tcpdf.org)

© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.

www.delock.com

87657

1 / 1

13.01.2017