
Delock Slim SATA 5.25″ Installation Frame for 1 x M.2 SSD Key 
B / 1 x mSATA SSD
 Description
This Delock installation frame in slim-format can be 
installed into a 5.25″ SATA slim bay in order to operate a 
M.2 SSD or an mSATA SSD. If both slots are occupied, 
only the M.2 SSD can be used.
 Specification
• Connector:
 1 x 67 Pin M.2 key B slot
 1 x mSATA slot (half size / full size) 
 1 x Slim SATA 13 pin female
• For the installation into a slim 5.25″ bay
• Interface: SATA
• Supports M.2 modules in format 2280, 2260 and 2242 with key B or key B+M based 
 on SATA
• Maximum height of the components on the module: 1.5 mm application of double-sided 
 assembled modules supported
• Data transfer rate up to 6 Gb/s
• Dimensions (LxWxH): ca. 128 x 128 x 13 mm
• OS independent, no driver installation necessary
Item No. 62718
EAN: 4043619627189
Country of origin: China
Package: Retail Box
 System requirements
• A free slim SATA 5.25″ bay
 Package content
• Slim SATA 5.25″ installation frame
• Screwdriver
• Spacer
 Images
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes 
and errors excepted.
www.delock.com
62718
1 / 2
02.02.2017

 General
 Form factor: Slim 5.25″ 
 Supported operating system: OS independent, no driver installation necessary 
 Slot: SATA 
 Supported module: M.2 modules in format 2280, 2260 and 2242 with key B or key B+M based on SATA
mSATA full size / half size 
 Maximum height of the components on 
the module:
 Interface
 connector 1: 1 x Slim SATA 13 pin female 
 connector 2: 1 x 67 pin M.2 key B slot 
 connector 3: 1 x mSATA slot (half size / full size)
 Technical characteristics
 Data transfer rate: 6 Gb/s
 Physical characteristics
 Length: 128 mm 
 Width: 128 mm 
 Height: 13 mm
1.5 mm application of double-sided assembled modules supported
Powered by TCPDF (www.tcpdf.org)
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes 
and errors excepted.
www.delock.com
62718
2 / 2
02.02.2017