DeLOCK PCI Express x16 x4-x8 Card to 1x NVMe M.2 Key M for Server User Manual

Delock Adapter Raspberry Pi GPIO Pin Header > Serial RS-232

Description

This adapter by Delock enables you to connect a serial
device via the 4 pin pin header connector (RX and TX)
with the GPIO interface of your Raspberry Pi by using the
included cable. Then configure your system according to
the requirement.

Specification

• Connectors:
1 x Sub-D 9 pin male RS-232
1 x 4 pin pin header

• Supported baud rate up to 230 Kb/s

• Level shifter from RS-232 3.3 V to 5 V on Raspberry Pi

• Supported input voltage: 2.7 V ~ 5.25 V

• Dimensions (LxWxH): ca. 48 x 43 x 16 mm

• OS independent, no driver installation necessary

Item No. 65628

EAN: 4043619656288

Country of origin: Taiwan, Republic of
China

Package: White Box

System requirements

• A free pin header connector

• USB connection cables

Package content

• Adapter

• Cable pin header 4 pin > 5 pin

Images

Powered by TCPDF (www.tcpdf.org)

© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.

www.delock.com

65628

1 / 1

13.01.2017