Page 1
Delock Riser Card PCI Express x1 > 2 x PCIe x1 with 30 cm USB
cable
Description
The PCI Express riser card by Delock can be plugged into
any PCI Express x1 slot on the motherboard. The PCI
Express board can be mounted in a different position in the
case. This allows up to two PCIe cards to be operated in
each PCIe slot of a motherboard.
Note
The package content includes a USB 3.0 riser cable with a length of 30 cm. No USB
signals are transmitted through this cable, therefore it is not possible to exchange it with a
different or longer cable.
Specification
• Connectors:
Motherboard side:
1 x PCI Express x1
1 x USB 3.0 Type-A female
Riser side:
2 x PCI Express x1 slot
1 x USB 3.0 Type-A female
1 x Floppy 4 pin power plug
• Chipset: Pericom PI7C9X2G
• Cable data:
1 x riser cable USB 3.0 Type-A male to male ca. 30 cm (incl. connectors)
1 x power cable Floppy to Molex ca. 15 cm (incl. connectors)
• Dimensions of the riser card (LxWxH): ca. 120 x 34 x 15 mm
Item no. 41433
EAN: 4043619414338
Country of origin: China
Package: • Retail Box
System requirements
• Linux Kernel 2.6.38 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express x1 / x4 / x8 / x16 / x32 slot
• Power supply with a free Molex power connector
Package content
• PCIe to USB riser card
• USB to PCIe riser card
• 1 x USB 3.0 cable
• 1 x Power cable
Page 2
Images
Page 3
General
Supported operating system: Windows 7 32-bit
Windows 7 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Linux Kernel 2.6.38 or above
Physical characteristics
Length: 120 mm
Width: 34 mm
Height: 15 mm
Powered by TCPDF (www.tcpdf.org)
Loading...