DeLOCK Dual CFast 2.0 RAID Enclosure, USB 3.1 User Manual

Delock External Enclosure 2 x CFast > USB 3.1 Gen 2 with RAID

Description

The aluminium enclosure by Delock enables the installation of two CFast memories, which can be connected via USB Type-C™ to the PC or laptop. When using more than one memory card, there is the possibility to use different RAID level.

Note

The package contains the cable USB-C™ male to USB Type-A male. This can also be used only in this direction. Therefore the USB-C™ male must be connected to the computer and the USB Type-A male to the enclosure. Optionally there is a cable from Delock USB Type-A male to USB Type-A male (83981), so that this enclosure can also be connected to a computer with USB Type-A interface. In addition, there is the possibility to connect a power supply if the power from the USB port is not enough.

Item no. 42582

EAN: 4043619425822

Country of origin: Taiwan, Republic of China

Package: Retail Box

Specification

• Connector: external: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female 1 x 5 V DC jack internal: 2 x CFast 2.0 slot

• Chipset: Asmedia ASM1352R

• Supports CFast type I / II memory cards

• Downwards compatible to CFast 1.0

• Supports RAID 0, 1, SPAN, Port Multiplier

• RAID mode set by DIP switch on board

• Data transfer rate up to 10 Gbps

• Enclosure with full-PCB

• Colour: silver

• Dimensions (LxWxH): ca. 136 x 80 x 16 mm

• Hot Plug, Plug & Play

Specification of power connector

• 5 V, ground outside, plus inside

• Dimensions: inside: ø ca. 1.35 mm outside: ø ca. 3.5 mm length: ca. 8.5 mm

• Optional power supply: Navilock 41337

System requirements

• Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.6

• PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port

Package content

• External enclosure

• Cable USB-C™ male to USB Type-A male, length ca. 50 cm

www.delock.com

42582

1 / 3

17.07.2018

• Cover, screwdriver, screws

• User manual

Images

www.delock.com

42582

2 / 3

17.07.2018

+ 1 hidden pages