Delock SATA Card Reader 3.5 to Compact Flash type I / II and IBM Micro
Drive
Description
This Card Reader is bootable and can be installed either to
the backside into a PCI slot or with the enclosed mounting
frame into a 3.5 front bay of your PC. The device will be
connected to the SATA interface on the motherboard and
thus reads and writes Compact Flash cards type I / II and
IBM Micro Drive.
Spezielle Eigenschaft
• Bootable
Specification
• Serial ATA 1.0a specification
• Supports Compact Flash card type I / II and IBM Micro Drive
• Supports Compact Flash card with 3.3 V / 5V
• For installation into a 3.5 front bay or backside of the PC
• Data transfer rate: SATA 1.5 Gb/s
• Powered by 4 pin Floppy connector
• LED indicator
• Push button ejector
• Bootable
Item No. 91635
EAN
Country of origin
4043619916351
Taiwan, Republic of
China
System requirements
• PC with a free 3.5 bay or PCI slot
• SATA port on the motherboard
• Windows, Mac and Linux
Package content
• SATA Card Reader
• Power cable, screws, mounting frame
• Low profile and standard PC bracket
• User manual
Package
• Retail Box
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
1
Images
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Powered by TCPDF (www.tcpdf.org)
www.delock.com
2