Delock 86345, 86341, 86343, 86344, 86342 User manual [ml]
...
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can nd current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice
in advance. Errors and misprints excepted.
Copyright
No part of this user's manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 03/2015
Short manual
Kurzanleitung
Keystone Module RJ45 female >
LSA Cat.6 UTP
86340 - black
EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany
Declaration of conformity
Products with a CE symbol fulll the RoHS directive (2011/65/EU), which were
released by the EU-comission.
The declaration of conformity can be downloaded here:
http://www.delock.de/service/conformity
WEEE-notice
The WEEE (Waste Electrical and Electronic Equipment)-directive, which became
effective as European law on February 13th 2003, resulted in an all out change
in the disposal of disused electro devices. The primarily purpose of this directive
is the avoidance of electrical waste (WEEE) and at the same time the support of
recycling and other forms of recycling in order to reduce waste. The WEEE-logo on
the device and the package indicates that the device should not be disposed in the
normal household garbage. You are responsible for taking the disused electrical
and electronical devices to a respective collecting point. A separated collection and
reasonable recycling of your electrical waste helps handling the natural resources
more economical. Furthermore recycling of electrical waste is a contribution to
keep the environment and thus also the health of men. Further information about
disposal of electrical and electronical waste, recycling and the collection points
are available in local organizations, waste management enterprises, in specialized
trade and the producer of the device.
Product-No:86340-86349
User manual no:86340-a
www.delock.com
86341 - white
86342 - gray
86343 - blue
86344 - red
EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany
86345 - yellow
86349 - green
Description
This module by Delock can be used to connect twisted pair cable to an RJ45
female port. With its standardised dimensions it can be used for easy snap-in
mounting in e. g. a Keystone patchpanel, face plate or surface-mount box.
Specication
• Connector: RJ45 female (8P/8C) > LSA (toolless)
• Unshielded (Cat.6)
• Compliant with Cat.6 requirements of ISO/IEC 11801 Edition 2.2,
EN 50173-1:2011 and EN 60603-7-4, and ANSI/TIA 568-C.2
• For Keystone ports with 19.2 x 14.9 mm
• Dimensions (LxWxH): ca. 41 x 24.5 x 18.1 mm
Package content
• Keystone module, cover, zip-tie
Safety instructions:
• Protect the product against moisture
• Avoid anti-static electricity when installing the product
Kurzbeschreibung
Dieses Modul von Delock können Sie zum Anschluss von Netzwerkkabel an eine
RJ45 Buchse verwenden. Durch die standardisierten Abmessungen ist es zur
einfachen Snap-In Montage in verschiedenen Halterungen, wie z. B. Keystone
Patchpanel, Dosen oder Gehäuse geeignet.
Technische Daten
• Anschlüsse: RJ45 Buchse (8P/8C) > LSA (werkzeugfrei)
• Ungeschirmt (Cat.6)
• Enstpricht den Cat.6 Anforderungen nach ISO/IEC 11801 Edition 2.2,
EN 50173-1:2011 und EN 60603-7-4, und ANSI/TIA 568-C.2
• Zum Einbau in Keystone Halterungen mit 19,2 x 14,9 mm
• Maße (LxBxH): ca. 41 x 24,5 x 18,1 mm
Packungsinhalt
• Keystone Modul, Abdeckung, Kabelbinder
Sicherheitshinweise:
• Produkt vor Feuchtigkeit schützen
• Vermeiden Sie antistatische Auadung beim Einbau des Produktes
Installation
1.
Strip approximately 40 mm of the cable jacket, until there are separate wire
pairs. Suitable for 22 - 26 AWG solid or standard wire.
1.
Entfernen Sie etwa 40 mm des Isoliermaterials bis die Adernpaare einzeln
vorliegen. Geeignet für 22 ~ 26 AWG Einzeladern oder Litzen
Drain Wire
Schirmungsdraht
2.
Wiring Congurations
T568A T568B
Pin 5 white / blue weiß / blau white / blue weiß / blau
Pin 4 blue blau blue blau
Pin 1 white / green weiß / grün white / orange weiß / orange
Pin 2 green grün orange orange
Pin 3 white / orange weiß / orange white / green weiß / grün
Pin 6 orange orange green grün
Pin 7 white / brown weiß / braun white / brown weiß / braun
Pin 8 brown braun brown braun
3.
Follow the cap color code to place the wires into the cap slot. Keep the pairs
twisted as possible as you can and cut off the surplus wires.
3.
Folgen Sie der Farbmarkierung um die einzelnen Adern in die Abdeckkappe
einzulegen. Behalten Sie die Verdrillung soweit wie möglich bei und schneiden
Sie die überschüssigen Adern ab.
Adernbelegung
5.
Lock the side caps with "CLICK" means successful connection.
5.
Verschließen Sie den Stecker, bis er mit einem "Click" einrastet.
6.
Tie up the cable and nish.
6.
Verschließen Sie den Stecker mit einem Kabelbinder.
Unshielded
Ungeschirmt
Shielded
Geschirmt
4.
Follow the color sign to put the cap onto the IDC.
4.
Orientieren Sie sich an den Farbmarkierungen, und setzen die Kappe in den
Stecker ein.
Connect the drain wire to the shielded shell
Verbinden sie den Schirmungsdraht mit dem
geschirmten Gehäuse
Loading...