DeLOCK 82977 User Manual
WWW. D E L O C K . C O M
Slot bracket USB 3.0 pin header 19 pin
+ SATA 7 pin internal > 1 x USB 3.0-A
+ 1 x Multiport external
Description
This slot bracket by Delock can be
installed into a standard PC slot and
expands your system by an external
Multiport. The Multiport interface is a
combination of USB 3.0 and eSATAp,
which offers a number of connecting
options. Thus the Multiport enables you
to connect devices, like e.g. Hubs, Card
reader, external enclosure etc. with the
following interface:
1. USB 3.0
2. USB 2.0
Ref.
EAN
Country of origin
Customs tariff number
Specification
82977
4043619829774
China
84718000
DATA SHEET
3. eSATAp (Power Over eSATA 5 V)
4. eSATA
• Connector: internal 1 x 19 pin USB 3.0 pin header female
+ SATA 7 pin
external 1 x USB 3.0-A female
1 x Multiport female
• Cable gauge: 28 AWG
• Current output: max. 900 mA per each USB port
• Voltage: 5 V
• Data transfer rate up to:
Super-Speed 5 Gb/s, High-Speed 480 MB/s
Full-Speed 12 Mb/s, Low-Speed 1.5 Mb/s, eSATA 3 Gb/s
• Downwards compatible to USB 2.0 and USB 1.1
• Cable length: ca. 45 cm (without connector)
System requirement
• PC with a free slot
• Mainboard with a free 19 pin USB 3.0 pin header connector
and a free SATA port
Note
: For operation of two devices at the same time, which
equire more than 900 mA for each device, you may need
to connect an additional power supply for the connected
device.
Package content
• Slot bracket
Package
• Delock poly bag
© 2011 by Delock. All names and symbols mentioned here are property of the respective producer.
Printing errors, changes and errors excepted.
Loading...