Page 1
WWW. D E L O C K . C O M
DATA SHEET
Slot bracket USB 3.0 pin header 19 pin 1 x internal
> 2 x USB 3.0-A female external
low profile
Description
This low profile slotblech by Delock is
most suitable for installation into a PC
slot of a mini PC and expands your
system by two external USB 3.0-A ports.
Thus you can connect different USB 3.0
devices, like e.g. external enclosure,
Card reader, memory etc. Since the
USB 3.0-A interface is compatible to its
forerunners USB 2.0 and USB 1.1, you
can still use your existing USB devices.
Ref.
EAN
Country of origin
Customs tariff number
82976
4043619829767
China
84718000
Images
Specification
• Connector: internal 4 x USB 3.0-A male
external 4 x USB 3.0-A female
• Cable gauge: 28 AWG
• Current output: max. 900 mA per each USB port
• Voltage: 5 V
• Data transfer rate up to: Super-Speed 5 Gb/s,
High-Speed 480 Mb/s,
Full-Speed 12 Mb/s,
Low-Speed 1.5 Mb/s
• Downwards compatible to USB 2.0 and USB 1.1
• Cable length: ca. 40 cm (without connector)
System requirement
• PC with a free slot
• PC with four free USB 3.0 Ports
Note
: For operation of four devices at the same time,
which require more than 900 mA for
each device, you may need to connect an additional
power supply for the connected device.
Package content
• Slot bracket
Package
• Delock poly bag
© 2011 by Delock. All names and symbols mentioned here are property of the respective producer.
Printing errors, changes and errors excepted.
Loading...