
Delock Adapter cable USB 2.0 Type-A to Serial RS-232 with 3 
open wires 0.5 m
 Description
This USB 2.0 Type-A to serial RS-232 adapter cable by 
Delock is suitable as a connection cable between a device 
with USB 2.0 and a device with RS-232 port. With the 
tinned open cable ends, the connection can be made 
directly to the RS-232 device connector or flexiible to 
various terminal blocks. In addition, it can be used to 
produce individual adapters and cable assemblies.
 Specification
• Connectors: 
 1 x USB Type-A male 
 1 x Serial RS-232 3 x open wires (tinned)
• Chipset: FTDI FT232R
• Compatible to UHCI / OHCI / EHCI controller
• Databits: 7 or 8
• Stop bits: 1 or 2
• Parity: none, space, even, odd, mark
• Data transfer rate up to 230.4 Kbps
• Pinout: RXD (red), TXD (white), GND (green)
• ESD protection IEC 61000-4-2 
 HCP & VCP: ±4kV 
 Air Discharge: ±8kV 
 Contact Discharge: ±4kV
• Cable diameter: ca. 5 mm
• Cable gauge: 26 AWG
• Conductor: stranded copper wire
• Isolation: PVC
• Cable length incl. connectors: ca. 0.5 m
• Colour: black
• Operating temperature: -10 °C ~ 80 °C
Item no. 63497
EAN: 4043619634972
Country of origin: China
Package: • Poly bag
 System requirements
• Mac OS 10.13 or above
• Linux Kernel 2.6 or above
• Windows 8.1/8.1-64/10/10-64
• Windows Server 2012 / Server 2012R2 / Server 2016
• PC or laptop with a free USB Type-A port
 Package content
• USB Type-A to 1 x serial Adapter
 

 General
 Function: Plug & Play
Converter
 Specification: RS-232 (EIA / TIA)
USB 2.0
 Supported operating system: Linux Kernel 2.6 or above
Mac OS 10.13 or above 
Windows 10 32-bit 
Windows 10 64-bit 
Windows 8.1 32-bit 
Windows 8.1 64-bit 
Windows Server 2012 R2 
Windows Server 2012
Windows Server 2016
 Interface
 Connector 1: 1 x USB 2.0 Type-A male 
 Connector 2: 3 x open end tinned
 Technical characteristics
 Chipset: FTDI 232R 
 Data transfer rate: bis zu 230,4 Kbps 
 FIFO: 128 byte
256 Byte 
 Signal transmission: TxD, RxD und GND 
 Data transmission: asynchronous
Bi-directional
Half duplex
full duplex 
 UART: USB to serial UART
 Physical characteristics
 Cable colour: black 
 Cable length: 0.5 m 
 Pin finishing: gold-plated
Tin-plated 
 Conductor gauge: 26 AWG 
 Insulator: PVC 
 Cable diameter: 5 mm
Powered by TCPDF (www.tcpdf.org)