Page 1
Delock Converter SATA 6 Gb/s 22 pin > USB 3.0-A male + USB 2.0-A
male
Description
This SATA converter by Delock enables you to connect a
2.5″ SATA HDD or SSD, without using an additional power
supply. The converter can be connected to two free USB
ports of your PC or notebook, whereas the USB 2.0
connection can supply additional 5 V, if required. The USB
3.0 male connector can be connected to a USB 3.0 port, in
order to achieve a higher data transfer rate of up to 5 Gb/s
(SuperSpeed). Furthermore the USB 3.0-A connector is
compatible to its forerunners USB 2.0 and USB 1.1, so that
you can connect the converter also to a USB 2.0 or USB 1.1
port.
Specification
• Suitable for e.g. 2.5″ HDD, SSD 3.3 V and 5 V
• Connector:
SATA 6 Gb/s 22 pin female >
USB 3.0-A male (data + power)
USB 2.0-A male (power)
• Voltage: additional 5 V via USB 2.0-A connector
• Data transfer rate up to:
SuperSpeed 5 Gb/s,
Hi-Speed 480 Mb/s,
Full-Speed 12 Mb/s,
Low-Speed 1.5 Mb/s
• Cable length: ca. 20 cm (incl. connector)
• Colour: black
Item No. 61883
EAN
Country of origin
4043619618835
China
System requirements
• PC or notebook with a free USB 3.0 and USB 2.0 port
Package content
• Converter
Package
• Poly bag
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Powered by TCPDF (www.tcpdf.org)
www.delock.com
1
Loading...