Delock 5.25″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub
incl. V / A indicator and fan control
Description
This card reader by Delock can be installed into a 5.25″
bay of a PC and will be connected to an internal USB 3.0
pin header male port. It has a 5 slot card reader and
enables the connection of up to four USB devices, which
the USB 3.0 hub provides. The LED display indicates the
current rating and voltage values of the connected USB
devices. In addition, the card reader has a slider for fan
control.
Specification
• Connector:
external:
5 x Card Reader slots
4 x USB 3.0 Type-A female
internal:
2 x USB 3.0 Type-A male
1 x 4 pin power connector
1 x 3 pin fan pin header male
• 1 slider for fan control
• 1 push button to select the USB port, which indicates voltage (V) and current (A)
• Chipset: GL3522 (Hub), GL3223 (Card Reader)
• Plastic housing for installation into a 5.25″ bay
• Data transfer rate up to 5 Gb/s
• 4 port USB 3.0 hub supports USB Battery Charging BC 1.2 specification
• LED indicator for the card reader for power (green) and access (red)
• Cable data:
2 x USB 3.0 Type-A female to 1 x 19 pin USB 3.0 pin header female
ca. 58 cm (incl. connector)
1 x 4 pin power cable ca. 33 cm (incl. connector)
• Hot Swap, Plug & Play
Item No. 91494
EAN: 4043619914944
Country of origin: China
Package: Retail Box
• Supports following memory cards:
Slot 1
Compact Flash /
CF I, CF II, CF Extreme, CF Extreme III,
CF Extreme IV, Micro Drive
Micro Drive
Slot 2
Memory Stick
MS, High Speed Memory Stick (HS MS),
MS PRO,
MS PRO-HG, Memory Stick XC, MS
Duo,
MS PRO Duo, MS PRO Duo Mark2, MS
PRO-HG,
MS PRO-HG Duo, MS PRO-HG Duo
HX,
MS Micro*, MS PRO Micro*, MS-HG
Micro*,
MS XC-HG Micro*, M2*
Slot 3
xD, xD type M, xD type H
xD
Slot 4
Micro SD
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.
microSD, Micro SDHC, Micro SDHC
Ultra, T-Flash
www.delock.com
91494
1 / 3
13.01.2017
Slot 5
Secure Digital /
Multi Media Card
SD, SD Ultra, SD High Capacity (SDHC),
SD Ultra, SDHC Ultra, SDXC, SDXC
Ultra, MMC, miniSD, MMCmobile, RSMMC
*Adapter is required
System requirements
• Windows 7/7-64/8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.7
• PC with one free 5.25″ bay
• Mainboard with a free 19 pin USB 3.0 pin header male
• Power supply with a free 4 pin power connector
• Fan with a free 3 pin fan control connection cable
Package content
• 5.25″ Card Reader
• 2 x cable
• Screws
• User manual
Images
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.
www.delock.com
91494
2 / 3
13.01.2017