DeLOCK 3.5 SuperSpeed USB external Enclosure for 1x 3.5 SATA HDD, USB-C 3.0 User Manual

Delock External Enclosure for 3.5″ SATA HDD with SuperSpeed
USB (USB 3.1 Gen 1)

Description

This plastic enclosure by Delock can be used for the
installation of a 3.5″ SATA hard drive.

Fast data transfer due to SuperSpeed USB

Due to the JMicron chipset, this hard disk enclosure
supports SuperSpeed USB with up to 5 Gbps transfer
speed. This allows data to be transferred quickly to and
from the hard disk.

Specification

• Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle

• Suitable for all 3.5″ SATA HDDs up to 6 Gb/s

• Chipset: JMicron JMS578

• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps

• Supports UASP

• On / Off switch

• LED indicator for power and access

• Plastic housing

• Colour: black

• Dimensions (LxWxH): ca. 186 x 116 x 35 mm

• Hot Swap, Plug & Play

Item no. 42612

EAN: 4043619426126

Country of origin: China

Package: • Retail Box

Power supply specification

• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A

• Output: 12 V / 2 A

• Ground outside, plus inside

• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 11 mm

System requirements

• Linux Kernel 3.3 or above

• Windows 7/7-64/8.1/8.1-64/10/10-64

• PC or laptop with a free USB Type-A port

Package content

• 3.5″ external enclosure

• Cable USB Type-A male to Type-A male, length ca. 60 cm

• Power supply

• User manual

Images