DeLOCK 3.5 hard drive caddy on 2.5 SATA User Manual

Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD

Description

This Delock Mobile Rack is designed for external or
internal connection of a 2.5″ SATA HDD. Insert the HDD
directly into the frame and connect it either externally to a
Power Over eSATA port with the help of an optional cable,
or internally to SATA. The dimension of the frame complies
to a standard 3.5″ HDD. Thus you can install the frame into
a 3.5″ slot as well as into a 5.25″ mobile rack.

Specification

• Connector:
outside: 1 x SATA 22 pin plug
inside: 1 x SATA 22 pin receptacle (NSS connector)

• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
support 5 V HDD / SSD

• Data transfer rate up to 6 Gb/s

• Possible applications:

1. internally in a 3.5″ bay

2. inside a 5.25″ mobile rack

3. externally over eSATAp (cable optional)

• Hot Swap

• With special SATA NSS connector inside to protect the
SATA connector of the HDD from wear at each change

• Optional HDD fan (mounting holes on the bottom side of mobile rack)

• OS independent, no driver installation necessary

Item No. 47224

EAN: 4043619472246

Country of origin: China

Package: Retail Box

System requirements

• For external using:

1. PC or notebook with a free Power Over eSATA port
(optional eSATAp cable item 84397 / 84396 / 84432)

• For internal using:

1. 1 SATA data cable

2. PC with a free SATA port

3. Power supply with a free SATA power connector

Package content

• Mobile Rack

• Screws

• User manual

© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.

www.delock.com

47224

1 / 2

13.01.2017

Images

Powered by TCPDF (www.tcpdf.org)

© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.

www.delock.com

47224

2 / 2

13.01.2017