DeLOCK 3.5 Converter 4x SATA 7-Pin User Manual
Delock 3.5″ Converter 4 x SATA 7 Pin > 4 x M.2 NGFF
Description
This Delock converter enables you to connect up to four
M.2 NGFF SSDs in 2280, 2260, 2242 and 2230 format
which can be used as a 3.5″ HDD. The converter can be
installed into your system internally through an SATA 7 pin
interfaces, therefor you have to connect one SATA cable
with your system for each connected M.2 module.
Specification
• Connector:
4 x SATA 7 pin male
1 x Molex 4 pin power connector
4 x 67 pin M.2 NGFF key B slot
• Interface: SATA
• Form factor: 3.5″
• Supports M.2 NGFF modules in format 2280, 2260, 2242 and
2230 with key B or key B+M based on SATA
• Maximum height of the components on the module: 1.35 mm
application of double-sided assembled modules supported
• Bootable
• Data transfer rate up to 6 Gb/s
• Dimensions (LxWxH): ca. 138 x 102 x 20 mm
• OS independent, no driver installation necessary
Item No. 62554
EAN: 4043619625543
Country of origin: China
Package: Retail Box
System requirements
• A free SATA 7 pin interface for each connected M.2 module
Package content
• Converter
• 4 x fixing screw for M.2 module
Images
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.
www.delock.com
62554
1 / 2
13.01.2017
Powered by TCPDF (www.tcpdf.org)
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.
www.delock.com
62554
2 / 2
13.01.2017
Loading...