DeLOCK 3.5 4 Slot + USB-C Multi slot-Card Readers, USB 3.0 19-Pin receptacle [plug] User Manual

Delock 3.5″ USB 3.0 Card Reader 4 slot + 1 x USB-C™ female + 3 x USB 3.0-A female
Description
This card reader by Delock can be installed into a 3.5″ bay of a PC and will be connected to an internal USB 3.0 pin header male port. It has a four slot card reader and enables the connection of up to four USB devices. The hub has one USB Type-A port, which provides the quick charging function, as well as one USB Type-C™ port.
Note
Specification
• Connectors: external: 4 x Card Reader slots 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ female 1 x USB Type-A female charging port 2 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female internal: 1 x 19 pin USB 3.0 pin header female 1 x Molex 4 pin male
• Chipset: GL3522 (Hub), RTS5321 (Card Reader)
• Metal housing for installation into a 3.5″ bay
• Data transfer rate up to 5 Gbps
• Maximum output current: USB Type-C™ / USB Type-A female 5 V / 1.5 A USB Type-A female charging port 5 V / 2.4 A
• LED indicator for the card reader for power (green) and access (red)
• Cable data: 1 x 19 pin USB 3.0 pin header female cable ca. 53 cm (incl. connector) 1 x 4 pin power cable ca. 28 cm (incl. connector)
• Hot Swap, Plug & Play
Item no. 91657
EAN: 4043619916573
Country of origin: China
Package: Retail Box
• Supports following memory cards:
Slot 1 Compact Flash
CF I, CF II, Micro Drive
Slot 2 Micro SD
MicroSD, Micro SDHC, Micro SDXC, Micro SD UHS-I, Micro SD UHS-II, T-Flash, MMCmicro
Slot 3 Secure Digital / Multi Media Card
SD, SD High Capacity (SDHC), SD UHS-I, SD UHS-II, SDXC, miniSD*, MMC, MMC plus, MMCmobile*, RS-MMC
Slot 4 Memory Stick
MS, MS PRO, MS PRO-HG, Memory Stick XC, MS Duo, MS PRO MagicGate, MS PRO Duo, MS PRO-HG Duo, MS PRO-HG Duo, MS XC-HG Duo, MS XC Duo,
© 2018 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
91657
1 / 4
10.07.2018
MS Micro*, MS PRO-HG Micro*, MS HG Micro*, MS XC-HG Micro*, MS XC Micro*, M2*
*Adapter is required
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.x.x
• PC with one free 3.5″ bay
• Mainboard with a free 19 pin USB 3.0 pin header male
• Power supply with a free 4 pin power connector
Package content
• 3.5″ card reader with connection cable
• Screws
• User manual
Images
© 2018 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
91657
2 / 4
10.07.2018
Loading...
+ 2 hidden pages