DeLOCK 2.5 SuperSpeed USB external Enclosure for 1x 2.5 SATA HDD - SSD User Manual

Delock External Enclosure for 2.5″ SATA HDD / SSD with
SuperSpeed USB 10 Gbps (USB 3.1 Gen 2)

Description

This aluminum enclosure by Delock can be used for the
installation of a 2.5″ SATA hard drive or SSD. Despite the
slim design, hard disks up to a height of 9.5 mm can be
installed.

Full speed due to SuperSpeed USB 10 Gbps

Due to the VIA chipset, this hard disk enclosure supports
SuperSpeed USB with up to 10 Gbps transfer speed.
Thus, the full SATA 6 Gb/s transfer rate of the hard disk
can be exploited.

Full connectivity due to USB Type-C™ port

The external enclosure is connected to a PC or laptop via a
USB Type-C™ female port installed on the housing. The
included USB Type-C™ to USB Type-A cable allows the
connection to a free USB Type-A female port. Of course,
the enclosure can also be connected via an optional USB
Type-C™ cable to a free USB Type-C™ female port or a
free Thunderbolt™ port.

Specification

• Connectors:
external: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female
internal: 1 x SATA 6 Gb/s 22 pin receptacle

• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
HDD / SSD up to 4 TB

• Chipset: VIA VL716

• Data transfer rate up to 6 Gb/s

• Supports UASP

• LED indicator for power and access

• Robust aluminum housing

• Colour: black

• Dimensions (LxWxH): ca. 131 x 80 x 15 mm

• Hot Swap, Plug & Play

Item no. 42611

EAN: 4043619426119

Country of origin: China

Package: • Retail Box

System requirements

• Linux Kernel 3.3 or above

• Windows 7/7-64/8.1/8.1-64/10/10-64

• PC or laptop with a free USB Type-A port

Package content

• 2.5″ external enclosure

• Cable USB-C™ male to USB Type-A male, length ca. 46 cm

• Screwdriver

• Foam spacer

• User manual

Images