Dellking F1 Users Manual

Dellking

Helmet Bluetooth Headset

User Manual

®

Model: F1

Please read below content carefully before using

Thanks for purchasing F1 Bluetooth helmet intercom headset, may you will enjoy it. Please
read the “Safety Instructions” before using the product for your safety and correct use.

Caution

Do not immerse in water to avoid damaging the product as well as shortening its lifetime.
DO NOT drop or apply shock to th e product. Such act may cause irreparable damage to t he product.
DO NOT expose the product to ope n flame or under the direc t sunlight for a prolonge d period of the
time. Such environment may cause malfunction or fire.

Please do not change the setting or talk on the cell phone while driving. It may cause an accident.
Please note: in no event our product shall be liable for any special, indirect, punitive, incidental,
exemplary or consequential damages, or any damages whatsoever resulting from the usage of this
product.
Conversation on the cell phone when driving is extremely dangerous. Please go out of the road for
doing the telephone call.
If anything unusual such as smoke, heat or bad sm ell is detecte d, please disc onnect im mediate ly the
power and stop the usage. Continuing the use may cause electric shock or fire.

DO NOT lick, bite or put the product into the mouth. Such act may result in serious
injuries/accidents. Take utmost caution around children.
DO NOT change the mic when it g ets wet. With water exposure, it may cause fire, electrificati on or
failure.
Temperature range of use: -15℃-50℃
Please use only qualified accessories whic h have b een authen ticated by us, in or der to guarantee the
product correct functioning.

Note on battery charge

For battery charge, use USB terminal or USB adaptor at normal temperature.
Use regulation USB terminal only. Otherwise it may cause smoke generation or fire.
When charging the battery, if any strange odor or high heat should broken out, please immediately
pull the plug from the body. It may cause smoke generation or fire.
Do not leave the product in a state of charge long after the charging is completed. Such condition
may cause smoking/ignition.
Charge battery at least o nce every six months even if the product is not use for an extende d period of
time. Over discharge may require battery replacement.

Product Overview:

A. Power on/off Button/Pairing Button
B. Multi-functional Button
C. LED Indicator
D. Charging
E. Headset jack

About Charging

LED flash indicator Indicated State

LED Indicators off Power off
Red/Blue lights flashing alternately Pairing state
Blue light flash every 1 secs. Standby/working state
Red light flash every 3 secs. Battery is low
Red light flashing every 1 seconds Charging
Red light is on for a long time Charging completed

Technical Specification

Name of Product Helmet Bluetooth Headset

Model F1

Microphone Type DSP Noise Suppression MIC

Bluetooth Version V3.0 Class 1

Chip CSR BlueCore5MM

Bluetooth Profile HSP, HFP, A2DP, AVRCP, INTERCOM

Operation Range 10 meters

Intercom Range Up to 800 meters

Frequency Range 2.402-2.480GHz

Sensitivity -80db

Transmitting Power 16dB(max)

Charge Time About 3 hours

Music Play Time About 10 hours

Cell Phone Talk Time About 10 hours

Intercom Talk Time About 8 hours

Standby time About 100 hours

W orking Temperature

Storage Temperature

-15℃～50℃

-25℃～60℃

How to fit

It’s very easy to fit F1 on your helmet. Please follow below steps:
1．Removing adhesive protective sticker from back of Velcro pieces and firmly applying one

speaker to ear pocket inside helmet on right side.

2．Applying the other speaker to ear pocket inside helmet on left side and applying the

microphone support also on the left inner liner of the helmet.

Note: Please pay attention to the site of the microphone to ensure crystal

voice, the white dot on the microphone support should be exactly opposite to the
mouth and the distance between the microphone and mouth should be no more
than 2cm, improper installation may led to low voice or even no voice.

3.Putting the wires behind the inner liner of the helmet.

4.Sticking the F1 main unit by Velcro tapes on proper site on the helmet.

Installed F1 Headset