Dellking DK10 User Manual
Bluetooth Helmet Headset
User Manual
®
Dellking
odel No.: DK10
M
Thank you for purchasing the Bluetooth Helmet Headset DK 10. This headset is very
portable and easy to install on your helmet. With DSP technology, it ensure the crystal clear
voice when you are riding motorcycles or bicycles.
Please read this guide carefully to assure safe and satisfactory operation.
Caution
Do not immerse in water to avoid damaging the product as well as shortening its lifetime.
DO NOT drop or apply shock to th e product. Such act may cause irreparable damage to t he product.
DO NOT expose the product to ope n flame or under the direc t sunlight for a prolonge d period of the
time. Such environment may cause malfunction or fire.
Please do no
Please note: in no event our product shall be liable for any special, indirect, punitive, incidental,
exemplary or consequential damages, or any damages whatsoever resulting from the usage of this
product.
Conversation on the cell phone when driving is extremely dangerous. Please go out of the road for
doing the telephone call.
If anything unusual such as smoke, heat or bad sm ell is detec ted, please disconnect immediate ly the
power and stop the usage. Continuing the use may cause electric shock or fire.
DO NOT
injuries/accidents. Take utmost cau tio n arou nd chi ldren.
DO NOT change the mic when it g ets wet. With water exposure, it may ca use fire, ele ctrification o r
failure.
Temperature range of use: -15℃-50℃
Please use only qualified accessories whic h have b een aut henticated by us, in or der to guarantee th e
product correct functioning.
t change the setting or talk on the cell phone while driving. It may cause an accident.
lick, bite or put the product into the mouth. Such act may result in serious
Note on battery charge
For bat
Use regulation USB terminal only. Otherwise it may cause smoke generation or fire.
When charging the battery, if any strange odor or high heat should broken out, please immediately
pull the plug from the body. It may cause smoke generation or fire.
Do not leave the product in a state of charge long after the charging is completed. Such condition
may cause smoking/ignition.
Charge battery at least o nce every six months even if the product is not use for an extende d period of
time. Over discharge may require battery replacement.
tery charge, use USB terminal or USB adaptor at normal temperature.
Page 2
Product Overview
Main Functions:
Answering/ Rejecting calls
Last number redial/Voice dial
Bluetooth intercom
Stereo music
Connecting with GPS
Dual Link
Dual Audio Merge Listen
Firmware upgrade
PTT Function with Dellking Adapter
Bluetooth Remote control
About Charging
LED flash indicator Indicated State
LED Indicators off Power off
Red/Blue lights flashing alternately Pairing state
Blue light short flash once every 2 secs. Standby state
Blue light long flash once every 3 secs Connected working state
Red light flash every 3 secs. Battery is low
Red light flashing every 1 seconds Charging
Red light is on for a long time Charging completed
Page 3
Technical Specification
Name of Product
Model DK 10
Microphone Type DSP Noise Suppression MIC
Bluetooth Version V3.0 Class 2
Chip CSR BlueCore5MM
Bluetooth Profile HSP, HFP, A2DP, AVRCP, INTERCOM
Intercom Distance 10 meters
RF Frequency 2.4GHZ
Transmitting Power
Charge Time About 3 hours
Music Play Time About 4 hours
Bluetooth Helmet Head
.53dBm
5
set
Cell Phone Talk Time About 4 hours
Intercom Talk Time About 4 hours
Standby time About 12 hours
W orking Temperature
Storage Temperature
Battery Type
-15℃～45℃
-25℃～60℃
Li-Polymer 150mAh/3.7V
Page 4
Ho
w To Fit
It’s very easy to fit DK 10 in your helmet.
First, Sticking the DK 10 mounting plate. Peeling off the protective sticker on back of
Adhesive Velcro in the accessories, then press mounting plate firmly onto dent place to
accommodate ears on the helmet.
Second, （1）& （2) Inserting speakers. Removing adhesive protective sticker from back of
Velcro pieces and firmly apply speaker to area inside ear pocket opening inside helmet on left and
right sides.
Third, (3) About microphone. Adjusting the microphone before removing the Velcro sticker.
Apply to the middle of the mouth of helmet (put the short headset cable on the left, and the long
headset cable on the right);please pay attention to the site of the microphone, the flat side of the
microphone should be exactly opposite to the mouth. Improper installation may led to low voice
or even no voice.
.
(1) Velcro
Installed DK 10 Headset
Page 5
Loading...