Dell P01L001 UserMan compliance statement

Dell Specification Document Number: UX264 P01L Title: Regulatory Information to the User P01L Revision: A02-RFID P01L _______________________________________________________________________________________________

RFID Product Documentation

Introduction

This document includes all RFID worldwide documentation requirements. Additional regulatory compliance information can be found at the Dell website

www.dell.com/regulatory_compliance

Operational Information

Safety

Dell RFID devices, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by this device, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. Dell RFID devices operate within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interp ret the extensive research literature. In some situations or environments, the use of Dell RFID devices may be restricted by the prop rietor of the building or responsible representatives of the applicable organization.

Examples of such situations include the following:

Using Dell RFID devices on board airplanes, or T Using Dell RFID devices in any other environment where the risk of interference with other devices or services is

perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment

(an airport, for example), you are encouraged to ask for authorization to use a Dell RFID device before you turn it on.

Explosive Device Proximity Warning:

Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use.

Use on Aircraft Caution:

Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments.

Introductory Regulatory Information

Regulatory Information

Dell RFID devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Dell Inc. is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Dell RFID device kit, or the substitution or attachment of connecting cables and equipment other than that specified by Dell Inc. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Dell

___________________________________________________________________________________________ Dell Inc., Austin, Texas Page 1 of 5 “SPEC,ENG,STD,REG USER INFO”

Inc. and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

FCC Regulatory Information

COMMENT

United States, FCC Notices

FCC Radiation Exposure Statement

WARNING: The radiated output power of Dell RFID devices is far below the FCC radio frequency exposure

limits. Nevertheless, Dell RFID devices should be used in such a manner that the potential for human contact during normal operation is minimized.

This device has also been evaluated for and shown compliant with the FCC RF exposure limits under portable exposure conditions (antennas are within 20 cm of a person's body) when installed in certain specific OEM configurations. Details of the authorized configurations can be found at by entering the FCC ID number on the device.

Interference Statement

http://www.fcc.gov/oet/fccid/help.html

These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject to the following two conditions: (1) The devices may not cause harmful interference, and (2) The devices must accept any interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the instructions, the equipment may cause harmful interference to radio communications. There is no guarantee, however, that such interference will n ot occur in a particular installatio n. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

• Relocate this device.

• Increase the separation between the device and the receiver.

• Connect the device into an outlet on a circuit different from that of other electronics.

• Consult the dealer or an experienced radio technician for help.

NOTE: Dell RFID devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Dell could void your authority to operate the equipment.

Anatel Regulatory Information Brasil – Aviso da Anatel

___________________________________________________________________________________________ Dell Inc., Austin, Texas Page 2 of 5 “SPEC,ENG,STD,REG USER INFO”

+ 3 hidden pages