Dell M3601Q User Manual

Third party information brought

to you courtesy of Dell.

InfiniScale® IV M3601Q 40Gb/s

InfiniBand Blade Switch I/O Module for

PowerEdge M-Series

PN: M3601Q

Dell and the Dell logo are trademarks of Dell Inc.

Quick Start Guide

Me ll an ox Technologies

350 Oakmead Parkway Suite 100 www.mellanox.com

Sunnyvale, CA 94085 support.dell.com

Tel: [phone] Rev 1.3

Fax: [phone] Document Number: 3039

Quick Start Guide

Firmware

Your Mellanox switch comes with the latest firmware available at the time of production. To upgrade the
firmware, go to http://www.mellanox.com >Support > Dell for the latest releases.

Thank you for purchasing the Mellanox InfiniScale IV 32-port InfiniBand Switch.

Each switch is shipped with the following items:

• Mellanox M3601Q switch

• Quick Start Guide (this document)

• CD-ROM with user manual

Installation

Installation and initialization of the switch are straightforward processes, requiring attention to the normal
mechanical, power, ESD, and thermal precautions for rack-mounted equipment. Installation instructions and
safety warnings can be found in the user manual at:

http://www.mellanox.com >Support > Dell

The user manual also has instructions for:

• Installing the switch

• Updating the firmware and drivers

Mellanox management tools can be found by going to:

http://www.mellanox.com >Downloads>Firmware Tools.

Read the user manual corresponding to your Operating System.

Support

Please contact Dell if you require assistance.

Go to: http://support.dell.com