Dell M110 User Manual

Dell™ M110 Projector

Wireless Installation Guide

About Notes
NOTE: A NOTE indicates important information that helps you make better use of your projector.
__________________
Information in this document is subject to change without notice. © 2011 Dell Inc. All rights reserved.
registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
October 2011 Rev. A00
Dell
and the
DELL
logo are trademarks of Dell Inc.;
Microsoft, Windows 7
, and
Windows Vista
are trademarks or

Wireless Installation Instruction

NOTE: Your computer must have the following minimum system requirements:
Wireless Installation Instruction
Operating System:
•Windows
Microsoft Windows XP™ Home or Professional Service pack 2 (32-bit recommended), Windows Vista 32-bit or 64-bit, and Windows Professional 32-bit or 64-bit
•MAC
MacBook and above, MacOS 10.5 and above
Minimum Hardware:
®
a Intel b 256 MB of RAM required, 512 MB or more
c 10 MB of available hard-disk space d nViDIA or ATI graphic card must with 64 MB
e Ethernet adapter (10 / 100 bps) for an
Dual Core™ 1.8 MHz or greater
recommended
VRAM or above
Ethernet connection
®
7 Home or
f A supported WLAN adapter for a WLAN
connection (any NDIS-compliant 802.11b or
802.11g or 802.11n WiFi device)
®
Web browser:
Microsoft Internet Explorer 6.0 or 7.0 (recommended) or 8.0, Firefox 2.0, Safari 3.0 and above
NOTE: The wireless dongle is not shipped
with your projector. You can purchase it on the Dell website at www.dell.com.
3
Wireless Installation Instruction

Enable Wireless on the Projector

1 Install the optional wireless dongle.

SUZ-WU5205C
FCC ID:
2 Connect the power cord with AC adapter to
the wall outlet and press the power button.
SUZ-WU5205C
FCC ID:
4
3 Press the Menu button on your projector
control panel or remote control.
S UZ-W
FCC ID:
U520
5C
NOTE: Use , , and buttons to
navigate and to select.
4 Select the input source as USB.
Wireless Installation Instruction
The Wireless Guide Screen shown below appears:
5 Make a note of the LOGIN CODE, SSID, and
IP ADDRESS. You will need this information to log in later.

Install the Wireless Application Software on Your Computer

6 Connect your computer to the M110 wireless
network.
NOTE:
a Your computer must have wireless
network function to detect the connection.
5
Loading...
+ 9 hidden pages