Dell E2313HF, E1713SB, E2013HC, E1713SC, E2213HB User Manual

Dell™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide

About Your Monitor

Setting Up the Monitor

Operating the Monitor

Troubleshooting

Appendix

Notes, Cautions, Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model E1713Sc/E1713Sb/E2013Hc/E2213Hb/E2313Hf

October 2012 Rev. A00

Back to Contents Page

About Your Monitor

Dell™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide

Package Contents

Product Features

Identifying Parts and Controls

Monitor Specifications

Plug and Play Capability

LCD Monitor Quality & Pixel Policy

Maintenance Guidelines

Package Contents

Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.

Monitor

Stand Riser

Stand Base

Power Cable (varies by countries)

VGA Cable (attached to the monitor or individual packing)

DVI Cable (Packing for E2013H/E2213H/E2313H only)

Drivers and Documentation media

Quick Setup Guide

Product Information Guide

Product Features

The Dell™ E1713S/E2013H/E2213H/E2313H flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include:

E1713S: 43.3 cm (17.0 inches) viewable area display. 1280 x 1024 resolution, plus full-screen support for lower resolutions.

E2013H: 50.8 cm (20.0 inches) viewable area display. 1600 x 900 resolution, plus full-screen support for lower resolutions.

E2213H: 54.6 cm (21.5 inches) viewable area display. 1920 x 1080 resolution, plus full- screen support for lower resolutions.

E2313H: 58.4 cm (23.0 inches) viewable area display (Measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions.

LED backlight (for E2013H/E2213H/E2313H only)

Tilt adjustment capability.

Removable stand and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.

Plug and play capability if supported by your system.

On- Screen Display (OSD) adjustments for ease of set -up and screen optimization.

Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.

Dell Display Manager included (comes in the CD attached with the monitor).

Security lock slot.

Asset Management Capability.

ENERGY STAR compliant (for E2013H/E2213H/E2313H only)

EPEAT Gold compliant (for E2013H/E2213H/E2313H only).

RoHS compliant.

BFR/PVC- reduced.

TCO Certified Display.

Identifying Parts and Controls

Front View

E1713S/E2013H : E2213H/E2313H:

Function buttons (For more information, see

Operating the Monitor

2. Power On/Off button (with LED indicator)

)

Back View

Label Description Use

1 VESA mounting holes (100 mm) To mount the monitor.

2 Rating label Power ratings and energy information.

3 Barcode serial number label Refer to this label if you need to contact Dell for technical support.

4 Security lock slot Use a security lock with the slot to help secure your monitor.

5 Dell soundbar mounting brackets To attach the optional Dell Soundbar.

Side View

Right Side

Bottom View

E1713S: E2013H/E2213H/E2313H:

Label Description Use

1 Regulatory label Lists the regulatory approvals.

2 AC power connector To connect the monitor power cable.

3 VGA connector To connect your computer to the monitor using a VGA cable.

4 Regulatory label Lists the regulatory approvals.

Label Description Use

1 Regulatory label Lists the regulatory approvals.

2 AC power connector To connect the monitor power cable.

3 DVI connector To connect your computer to the monitor using a DVI cable.

4 VGA connector To connect your computer to the monitor using a VGA cable.

5 Regulatory label Lists the regulatory approvals.

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.

Power Management Modes

If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

E1713S:

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation Active Active Active Blue 25 W (Maximum)

Active-Off mode Inactive Inactive Blank Amber Less than 0.5 W

Switch Off - - - Off Less than 0.5 W

E2013H:

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation Active Active Active Blue 20 W (Maximum)

Active-Off mode Inactive Inactive Blank Amber Less than 0.5 W

Switch Off - - - Off Less than 0.5 W

E2213H:

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

18 W (Typical)

14 W(Typical)

Normal operation Active Active Active Blue 28 W (Maximum)

Active-Off mode Inactive Inactive Blank Amber Less than 0.5 W

Switch Off - - - Off Less than 0.5 W

E2313H:

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation Active Active Active Blue 30 W (Maximum)

Active-Off mode Inactive Inactive Blank Amber Less than 0.5 W

Switch Off - - - Off Less than 0.5 W

The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-Off mode, the following messages will be displayed:

19 W(Typical)

24 W(Typical)

Activate the computer and monitor to gain access to the OSD.

NOTE: Dell E2013H/E2213H/E2313H monitor is ENERGY STAR®-

compliance.

* Zero power consumption in Off mode can only be achieved by disconnecting the main cable from the monitor.

** Maximum power consumption with max luminance and contrast.

Pin Assignments

15-pin D-Sub connector

Pin Number Monitor Side of the 15-pin Side Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 GND

5 Self-test

6 GND-R

7 GND-G

8 GND-B

9 DDC +5V

10 GND -sync

11 GND

12 DDC data

13 H -sync

14 V -sync

15 DDC clock

DVI Connector

Pin Number

1 TMDS RX2-

2 TMDS RX2+

3 TMDS Ground

4 Floating

5 Floating

6 DDC Clock

7 DDC Data

8 Floating

9 TMDS RX1-

10 TMDS RX1+

11 TMDS Ground

12 Floating

13 Floating

14 +5 V power

15 Self test

16 Hot Plug Detect

17 TMDS RX0-

18 TMDS RX0+

19 TMDS Ground

20 Floating

24-pin Side of the Connected Signal Cable

21 Floating

22 TMDS Ground

23 TMDS Clock+

24 TMDS Clock-

Plug and Play Capability

You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.

Flat Panel Specifications

Model number Dell E1713S monitor Dell E2013H monitor Dell E2213H monitor Dell E2313H monitor

Screen type Active matrix - TFT LCD Active matrix - TFT LCD Active matrix - TFT LCD Active matrix - TFT LCD

Panel Type TN TN TN TN

Screen dimensions

Preset display area:

Horizontal

Vertical

Pixel pitch 0.264mm 0.284 mm 0.248 mm 0.265 mm

Viewing angle

Horizontal

Vertical

Luminance output 250 cd/m² (typical) 250 cd/m² (typical) 250 cd/m² (typical) 250 cd/m² (typical)

Contrast ratio 1000 to 1 (typical) 1000 to 1 (typical) 1000 to 1 (typical) 1000 to 1 (typical)

Faceplate coating Antiglare with hard -coating 3H Antiglare with hard -coating 3H Antiglare with hard -coating 3H Antiglare with hard- coating 3H

Backlight CCFL light bar system LED light bar system LED light bar system LED light bar system

Response Time 5 ms typical (black to white) 5 ms typical (black to white) 5 ms typical (black to white) 5 ms typical (black to white)

Color Depth 16.7 mil colors 16.7 mil colors 16.7 mil colors 16.7 mil colors

Color Gamut 83 % (typical) ** 83 % (typical) ** 83% (typical) ** 83 % (typical) **

* Based on estimation.

** [E1713S/E2013H/E2213H/E2313H] color gamut (typical) is based on CIE1976 (83 %) and CIE1931 (72 %) test standards.

43.3 cm (17.0 inches) (17.0 -inch viewable image size)

337.9 mm (13.30 inches)

270.3 mm (10.64 inches)

170 ° typical

160 ° typical

50.8 cm (20.0 inches) (20.0 -inch wide viewable image size)

442.8 mm (17.43 inches)

249.1 mm (9.81 inches)

170 ° typical

160 ° typical

54.6 cm (21.5 inches) (21.5 -inch wide viewable image size)

476.1 mm (18.74 inches)

267.8 mm (10.54 inches)

170 ° typical

160 ° typical

58.4 cm (23.0 inches) (23.0 -inch wide viewable image size)

509.2 mm (20.05 inches)

286.4 mm (11.28 inches)

170 ° typical

160 ° typical

Resolution Specifications

Model number Dell E1713S monitor Dell E2013H monitor Dell E2213H monitor Dell E2313H monitor

Scan range

Horizontal

Vertical

Maximum preset resolution 1280 x 1024 at 60 Hz 1600 x 900 at 60 Hz 1920 x 1080 at 60 Hz 1920 x 1080 at 60 Hz

30 kHz to 81 kHz (automatic)

56 Hz to 76 Hz (automatic)

30 kHz to 83 kHz (automatic)

56 Hz to 76 Hz (automatic)

30 kHz to 83 kHz (automatic)

56 Hz to 76 Hz (automatic)

30 kHz to 83 kHz (automatic)

56 Hz to 76 Hz (automatic)

Electrical Specifications

Model number

Video input signals

Synchronization input signals

Dell E1713S/E2013H/E2213H/E2313H monitor

Analog RGB: 0.7 Volts +/- 5 %, 75 ohm input impedance DVI-D: Single link maximum data rate including 8b/10b overhead is 4.95 Gbit/s @ 165 MHz base on four TMDS pairs, 100 ohm input impedence.(For E2013H/E2213H/E2213H only)

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)

AC input voltage / frequency / current

Inrush current

100 VAC to 240 VAC/50 Hz or 60 Hz + (Max.)

120 V: 30 A (Max.) 240 V: 60 A (Max.)

3 Hz/1.5 A

Preset Display Modes

The following table lists the preset modes for which Dell guarantees image size and centering:

E1713S:

Display Mode Horizontal Frequency

VESA, 720 x 400 31.5 70.1 28.3 - /+

VESA, 640 x 480 31.5 59.9 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

E2013H:

Display Mode Horizontal Frequency

VESA, 720 x 400 31.5 70.1 28.3 - /+

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

VESA, 1600 x 900 60.0 60.0 108.0 +/+

E2213H:

Display Mode Horizontal Frequency

VESA, 720 x 400 31.5 70.1 28.3 - /+

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

VESA, 1600 x 900 60.0 60.0 108.0 +/+

VESA, 1920 x 1080 67.5 60.0 148.5 +/+

E2313H:

Display Mode Horizontal Frequency

VESA, 720 x 400 31.5 70.1 28.3 - /+

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

(kHz)

Vertical Frequency

(Hz)

Vertical Frequency

(Hz)

Vertical Frequency

(Hz)

Vertical Frequency

(Hz)

Pixel Clock (MHz) Sync Polarity

(Horizontal/Vertical)

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

VESA, 1600 x 900 60.0 60.0 108.0 +/+

VESA, 1920 x 1080 67.5 60.0 148.5 +/+

Physical Characteristics

The following table lists the monitor's physical characteristics:

Model Number Dell E1713S monitor Dell E2013H monitor Dell E2213H monitor Dell E2313H monitor

Connector type D-subminiature, blue connector

Signal cable type

Dimensions: (with stand)

Height

Width

Depth

Dimensions: (without stand)

Height

Width

Depth

Stand dimensions:

Height

Width

Depth

Weight:

Weight with packaging

Weight with stand assembly and cables 3.62 kg (7.98 lb) 3.43 kg (7.54 lb) 4.05 kg (8.93 lb) 4.62 kg (10.17 lb)

Weight without stand assembly (For wall mount or VESA mount considerations - no cables)

Weight of stand assembly 0.33 kg (0.73 lb) 0.33 kg (0.73 lb) 0.76 kg (1.68 lb) 0.76 kg (1.68 lb)

D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor

378.9 mm (14.92 inches)

375.5 mm (14.78 inches)

163.5 mm (6.44 inches)

307.9 mm (12.12 inches)

375.5 mm (14.78 inches)

59.0 mm (2.32 inches)

141.4 mm (5.57 inches)

236.0 mm (9.29 inches)

163.5 mm (6.44 inches)

4.31 kg (9.50 lb)

3.02 kg (6.66 lb) 2.71 kg (5.96 lb) 2.89 kg (6.37 lb) 3.46 kg (7.62 lb)

D-subminiature, blue connector

DVI-D: White connector

D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor

DVI-D: Detachable, DVI-D, Solid pins, shipped detached from the monitor

366.9 mm (14.45 inches)

478.8 mm (18.85 inches)

163.5 mm (6.44 inches)

285.0 mm (11.22 inches)

478.8 mm (18.85 inches)

52.0 mm (2.05 inches)

141.4 mm (5.57 inches)

236.0 mm (9.29 inches)

163.5 mm (6.44 inches)

4.73 kg (10.40 lb)

D-subminiature, blue connector;

DVI-D: White connector

D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor

DVI-D: Detachable, DVI-D, Solid pins, shipped detached from the monitor

386.6 mm (15.22 inches)

513.1 mm (20.20 inches)

180.1 mm (7.09 inches)

304.6 mm (11.99 inches)

513.1 mm (20.20 inches)

52.0 mm (2.05 inches)

168.1 mm (6.62 inches)

256.0 mm (10.08 inches)

180.1 mm (7.09 inches)

5.31 kg (11.70 lb)

D-subminiature, blue connector;

DVI-D: White connector

D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor

DVI-D: Detachable, DVI-D, Solid pins, shipped detached from the monitor

404.8 mm (15.94 inches)

546.4 mm (21.51 inches)

180.1 mm (7.09 inches)

323.3 mm (12.73 inches)

546.4 mm (21.51 inches)

52.0 mm (2.05 inches)

168.1 mm (6.62 inches)

256.0 mm (10.08 inches)

180.1 mm (7.09 inches)

5.79 kg (12.74 lb)

Environmental Characteristics

The following table lists the environmental conditions for your monitor:

Model Number Dell E1713S monitor Dell E2013H monitor Dell E2213H monitor Dell E2313H monitor

Temperature

Operating

Non-operating

Humidity

Operating

Non-operating

Altitude

0 °C to 40 °C (32 °F to 104 °F)

Storage: -20 °C to 60 °C (- 4 °F to 140 °F) Shipping: -20 °C to 60 °C (- 4 °F to 140 °F)

10 % to 80 % (non-condensing)

Storage: 5 % to 90 % (non-condensing) Shipping: 5 % to 90 % (non-condensing)

0 °C to 40 °C (32 °F to 104 °F)

Storage: -20 °C to 60 °C (- 4 °F to 140 °F) Shipping: -20 °C to 60 °C (- 4 °F to 140 °F)

10 % to 80 % (non-condensing)

Storage: 5 % to 90 % (non-condensing) Shipping: 5 % to 90 % (non-condensing)

0 °C to 40 °C (32 °F to 104 °F)

Storage: -20 °C to 60 °C (- 4 °F to 140 °F) Shipping: -20 °C to 60 °C (- 4 °F to 140 °F)

10 % to 80 % (non-condensing)

Storage: 5 % to 90 % (non-condensing) Shipping: 5 % to 90 % (non-condensing)

0 °C to 40 °C (32 °F to 104 °F)

Storage: -20 °C to 60 °C (- 4 °F to 140 °F) Shipping: -20 °C to 60 °C (- 4 °F to 140 °F)

10 % to 80 % (non-condensing)

Storage: 5 % to 90 % (non-condensing) Shipping: 5 % to 90 % (non-condensing)

Operating

Non-operating

Thermal dissipation

5,000 m (16,400 ft) max

10,668 m (35,000 ft) max

85.25 BTU/hour (maximum)

61.43 BTU/hour (typical)

5,000 m (16,400 ft) max

10,668 m (35,000 ft) max

68.26 BTU/hour (maximum)

47.78 BTU/hour (typical)

5,000 m (16,400 ft) max

10,668 m (35,000 ft) max

95.55 BTU/hour (maximum)

64.84 BTU/hour (typical)

5,000 m (16,400 ft) max

10,668 m (35,000 ft) max

102.39 BTU/hour (maximum)

81.92 BTU/hour (typical)

LCD Monitor Quality & Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot". When the pixel remains black, it is known as a "dark dot". In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at:

www.dell.com/support/monitors

Maintenance Guidelines

Caring for Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor.

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen- cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics. If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor. Handle your monitor with care as a darker- colored monitor may scratch and show white scuff marks more than a lighter-colored monitor. To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power Off your monitor when not in use.

Back to Contents Page

Setting Up the Monitor

Dell™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide

Attaching the Stand

Removing the Monitor Stand for VESA Wall Mount

Connecting Your Monitor

Attaching the Dell Soundbar (Optional)

Attaching the Stand

NOTE: The stand base is detached when the monitor is shipped from the factory.

1. Assemble the stand riser to stand base.

a. Place the monitor stand base on a stable table top.

b. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.

2. Attach the stand assembly to the monitor:

a. Place the monitor on a soft cloth or cushion near the edge of desk.

b. Align the stand assembly bracket to the monitor groove.

c. Insert the bracket towards monitor until it locks in place.

Removing the Monitor Stand for VESA Wall Mount

After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the monitor stand:

1. Use a long screwdriver to push the release latch located in a hole just above the monitor stand.

2. Once the latch is released, remove the monitor stand away from the monitor.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.

To connect your monitor to the computer:

1. Turn Off your computer and disconnect the power cable.

2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems.

Connecting the Blue VGA Cable

Connecting the white DVI cable (for E2013H/E2213H/E2313H only)

CAUTION: The graphics are used for the purpose of illustration only. Appearance on the computer may vary.

Attaching Dell Soundbar AX510PA (optional)

+ 32 hidden pages