information sheet .................................................... 77
4 │ Contents
About your monitor
Package contents
Your monitor ships with the components indicated in the table. Ensure that you have received
all the components and see Contact Dell if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features may not be available in certain countries.
NOTE: To set up Stand from any other source, refer to the documentation
comes with the Stand for instruction.
Component imageComponent description
Monitor
a
a
b
b
c
c
Stand riser:
a. E1920H/E2020H
b. E2220H/E2420H/E2720H
c. E2420HS/E2720HS
Stand base:
a. E1920H/E2020H/E2220H/E2420H
b. E2720H
c. E2420HS/E2720HS
VESA™ Screw Cover
Power cable (varies by country)
About your monitor │ 5
VGA cable
(EMEA and Japan region)
DP cable
(E1920H/E2020H/E2220H/
E2420H and E2720H)
HDMI cable
(E2420HS and E2720HS)
• Quick Start Guide
• Safety, Environmental, and
Regulatory Information
Product features
The Dell E1920H/E2020H/E2220H/E2420H/E2420HS/E2720H/E2720HS flat panel
monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD)
Panel with LED backlight. The monitor features include :
• E1920H: 47.02 cm (18.5 in.) diagonal viewable area display (measured diagonally).
1366 x 768 resolution, with full-screen support for lower resolutions.
• E2020H: 49.53 cm (19.5 in.) diagonal viewable area display (measured diagonally).
1600 x 900 resolution, with full-screen support for lower resolutions.
• E2220H: 54.68 cm (21.5 in.) diagonal viewable area display (measured diagonally).
1920 x 1080 resolution, with full-screen support for lower resolutions.
• E2420H/HS: 60.47 cm (23.8 in.) diagonal viewable area display (measured diagonally).
1920 x 1080 resolution, with full-screen support for lower resolutions.
• E2720H/HS: 68.59 cm (27 in.) diagonal viewable area display (measured diagonally).
1920 x 1080 resolution, with full-screen support for lower resolutions.
• E1920H: Viewing angles of 65 degrees in vertical and 90 degrees in horizontal directions.
• E2020H/E2220H: Viewing angles of 160 degrees in vertical and 170 degrees in horizontal
directions.
• E2420H/E2420HS/E2720H/E2720HS: Wide viewing angles of 178 degrees in vertical and
horizontal directions.
• E1920H: Dynamic contrast ratio (600:1).
• E2020H/E2220H/E2420H/E2420HS/E2720H/E2720HS: Dynamic contrast ratio (1,000:1).
• Digital connectivity with DisplayPort or HDMI.
• Height adjustment capability for E2420HS and E2720HS.
• Dual built-in speakers for E2420HS and E2720HS.
• Plug and play capable if supported by your computer.
• On-Screen Display (OSD) adjustments for easy setup and screen optimization.
6 │ About your monitor
• ≤ 0.3 W in Standby Mode.
• Optimize eye comfort with a flicker-free screen.
• Possible long-term effects if blue light emission from the monitor may cause damage
to the eyes, including eye fatigue or digital eye strain. ComfortView feature to reduce
risk of eye strain from high blue light emission.
• Security-lock slot.
• Arsenic-free glass and Mercury-free for panel only.
• BFR/PVC-Reduced (Its circuit boards are made from BFR/PVC-free laminates).
• Meets NFPA 99 leakage current requirement.
• TCO-certified display.
• EPEAT registered where applicable. EPEAT registration varies by country.
See https://www.epeat.net for registration status by country.
• RoHS Compliant.
• Energy Star® Certified.
Identifying features and controls
Front view
E1920H/E2020H/E2220H/E2420H/E2720H
LabelDescriptionUse
Function buttonsTo access the OSD menu and change
1
Power On/Off button
2
(with LED indicator)
the settings if required. For more
information, see Using the front
panel controls.
To turn the monitor On or Off.
Solid white light indicates that the
monitor is turned on and functioning
normally. Blinking white light indicates
that the monitor is in Standby Mode.
About your monitor │ 7
12
Back view
5
132
Without monitor stand
LabelDescriptionUse
Security-lock slotTo secure the monitor using a security
Side view
1
Barcode, serial number, and
2
service tag label
Regulatory informationList the regulatory approvals.
3
Cable-management slotTo organize the cables.
4
Stand release buttonRelease stand from monitor.
5
lock (purchased separately).
See this label if you need to contact
Dell for technical support. The Service
Tag is a enables Dell service technicians
to identify the hardware components
in your computer and access warranty
information.
4
With monitor stand
8 │ About your monitor
Identifying features and controls
Front view
E2420HS/E2720HS
LabelDescriptionUse
Function buttonsTo access the OSD menu and change
1
Power On/Off button
2
(with LED indicator)
the settings if required. For more
information, see Using the front
panel controls.
To turn the monitor On or Off.
Solid white light indicates that the
monitor is turned on and functioning
normally. Blinking white light indicates
that the monitor is in Standby Mode.
12
Back view
132
Without monitor standWith monitor stand
4
About your monitor │ 9
5
LabelDescriptionUse
Security-lock slotTo secure the monitor using a security
Side view
1
Barcode, serial number, and
2
service tag label
Regulatory informationList the regulatory approvals.
3
Cable-management slotTo organize the cables.
4
Stand thumbscrewRelease stand from monitor.
5
lock (purchased separately).
See this label if you need to contact
Dell for technical support. The Service
Tag is a enables Dell service technicians
to identify the hardware components
in your computer and access warranty
information.
10 │ About your monitor
Bottom view, without monitor stand
132
E1920H/E2020H/E2220H/E2420H/E2720H
LabelDescriptionUse
Power portTo connect the monitor power cable.
1
DP portFor connection to your computer using
2
VGA portFor connection to your computer using
3
E2420HS/E2720HS
13442
DP cable.
VGA cable.
LabelDescriptionUse
Power portTo connect the monitor power cable.
1
HDMI portFor connection to your computer using
2
VGA portFor connection to your computer using
3
SpeakersTo produce audio output.
4
HDMI cable.
VGA cable.
About your monitor │ 11
Monitor specifications
ModelE1920HE2020H
Screen typeActive matrix-TFT LCDActive matrix-TFT LCD
Panel typeTNTN
Viewable area
Diagonal
Active area
Horizontal
Vertical
Area
Pixel pitch0.3000 mm x 0.3000 mm0.2700 mm x 0.2700 mm
Contrast ratio600 to 1 (typical)1,000 to 1 (typical)
Faceplate coatingAnti-glare with 3H hardness Anti-glare with 3H hardness
BacklightLED light bar systemLED light bar system
Response time
Normal mode
Fast mode
Color depth16.7 million colors16.7 million colors
Color gamut
Dell display manager
compatibility
Connectivity1 x DP1.2, 1 x VGA1 x DP1.2, 1 x VGA
Bezel width (edge of
monitor to active area)
SecuritySecurity-lock slot for cable
Tilt angle-5° to 21°-5° to 21°
Height adjustable stand -Built-in Speakers
Contrast ratio1,000 to 1 (typical)1,000 to 1 (typical)
Faceplate coatingAnti-glare with 3H hardness Anti-glare with 3H hardness
BacklightLED light bar systemLED light bar system
Response time
Normal mode
Fast mode
Color depth16.7 million colors16.7 million colors
Color gamut
Dell display manager
compatibility
Connectivity1 x DP1.2, 1 x VGA
Bezel width (edge of
monitor to active area)
SecuritySecurity-lock slot for cable
Tilt angle-5° to 21°-5° to 21°
Height adjustable stand
E2420H: 1 x DP1.2, 1 x VGA
E2420HS: 1 x HDMI1.4, 1 x VGA
11.8 mm (Top)
11.8 mm (Left/Right)
18.2 mm (Bottom)
Security-lock slot for cable
lock (optional purchase)
E2420H: Non adjustable
E2420HS: 100+/-5 mm
E2420H: No
E2420HS: Yes
About your monitor │ 13
Monitor specifications
ModelE2720H/E2720HS
Screen typeActive matrix-TFT LCD
Panel typeIn-Plane Switching
Viewable area
Diagonal
Active area
Horizontal
Vertical
Area
Pixel pitch0.3114 mm x 0.3114 mm
Pixel per inch (PPI)81
Viewing angle
Horizontal
Vertical
Brightness300 cd/m² (typical)
Contrast ratio1,000 to 1 (typical)
Faceplate coatingAnti-glare with 3H hardness
BacklightLED light bar system
Response time
Normal mode
Fast mode
Color depth16.7 million colors
Color gamut72% (CIE1931)/83%(CIE1976)
Dell display manager
compatibility
ConnectivityE2720H: 1 x DP1.2, 1 x VGA
Bezel width (edge of
monitor to active area)
SecuritySecurity-lock slot for cable
Tilt angle-5° to 21°
Height adjustable stand E2720H: Non adjustable
Built-in Speakers
(2 x 1 W sound output)
685.99 mm (27 in.)
597.89 mm (23.54 in.)
336.31 mm (13.24 in.)
2010.76 cm² (311.67 in.²)
178° (typical)
178° (typical)
8 ms
5 ms
Yes
E2720HS: 1 x HDMI1.4, 1 x VGA
11.8 mm (Top)
11.8 mm (Left/Right)
18.2 mm (Bottom)
lock (optional purchase)
E2720HS: 100+/-5 mma
E2720H: No
E2720HS: Yes
14 │ About your monitor
Resolution specifications
ModelE1920HE2020H
Horizontal scan range
Vertical scan range56 Hz to 76 Hz (automatic) 50 Hz to 76 Hz (automatic)
Maximum preset resolution 1366 x 768 @ 60 Hz1600 x 900 @ 60 Hz
30 kHz to 83 kHz (automatic) 30 kHz to 83 kHz (automatic)
ModelE2220HE2420H/E2420HS
Horizontal scan range
Vertical scan range56 Hz to 76 Hz (automatic) 50 Hz to 76 Hz (automatic)
Maximum preset resolution 1920 x 1080 @ 60 Hz1920 x 1080 @ 60 Hz
30 kHz to 83 kHz (automatic) 30 kHz to 83 kHz (automatic)
ModelE2720H/E2720HS
Horizontal scan range
Vertical scan range48 Hz to 75 Hz (automatic)
Maximum preset resolution 1920 x 1080 @ 60 Hz
30 kHz to 84 kHz (automatic)
Preset display modes
E1920H
Display modeHorizontal
frequency
(kHz)
VESA, 720 x 40031.570.128.3-/+
VESA, 640 x 48031.559.925.2-/VESA, 640 x 48037. 575.031.5-/VESA, 800 x 60037.960.340.0+/+
VESA, 800 x 60046.975.049.5+ /+
VESA, 1024 x 76848.460.065.0-/VESA, 1024 x 76860.075.078.8+/+
VESA, 1280 x102480.075.0135.0+/+
VESA, 1366 x 76847.7 159.7985.5+/+
Vertical
frequency
(Hz)
Pixel clock
(MHz)
Sync polarity
(Horizontal/Vertical)
About your monitor │ 15
Preset display modes
E2020H
Display modeHorizontal
frequency
(kHz)
VESA, 720 x 40031.57 0.128.3- /+
VESA, 640 x 480
VESA, 640 x 48037. 575.031.5- /-
VESA, 800 x 60037.960.340.0+/+
VESA, 800 x 60046.975.049.5+/+
VESA, 1024 x 768
VESA, 1024 x 76860.075.078.8+/+
Video input signals• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
• DP, 600 mV for each differential line,
100 Ω input impedance per differential pair
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current30 A (120 V AC Input)
Power
Consumption
ModelE2020HE2220H
Video input signals• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current30 A (120 V AC Input)
Power
Consumption
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/0.6 A
60 A (240 V AC Input)
0.2 W (Off Mode)
0.3 W (Standby Mode)
8 W (On Mode)
13.8 W (Max)
7.85 W (Pon)
24.81 kWh (TEC)
1
1
1
2
3
3
• DP, 600 mV for each differential line,
100 Ω input impedance per differential pair
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/0.7 A
60 A (240 V AC Input)
0.2 W (Off Mode)
0.2 W (Standby Mode)
9.9 W (On Mode)
14 W (Max)
9.37 W (Pon)
27.95 kWh (TEC)
1
1
1
2
3
3
0.2 W (Off Mode)
0.3 W (Standby Mode)
10.8 W (On Mode)
18 W (Max)
11.21 W (Pon)
35.16 kWh (TEC)
1
1
1
2
3
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon : Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
About your monitor │ 17
Electrical specifications
ModelE2420H
Video input signals• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
• DP, 600 mV for each differential line,
100 Ω input impedance per differential pair
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current30 A (120 V AC Input)
Power
Consumption
ModelE2420HS
Video input signals• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current30 A (120 V AC Input)
Power
Consumption
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/0.8 A
60 A (240 V AC Input)
0.2 W (Off Mode)
0.3 W (Standby Mode)
11.9 W (On Mode)
22 W (Max)
12.34 W (Pon)
38.52 kWh (TEC)
1
1
1
2
3
3
• HDMI 1.4 (HDCP 1.2), 600 mV for each differential line,
100 Ω input impedance per differential pair
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/0.8 A
60 A (240 V AC Input)
0.2 W (Off Mode)
0.3 W (Standby Mode)
11.9 W (On Mode)
24 W (Max)
12.6 W (Pon)
39.31 kWh (TEC)
1
1
1
2
3
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon : Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
18 │ About your monitor
Electrical specifications
ModelE2720H
Video input signals• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
• DP, 600 mV for each differential line,
100 Ω input impedance per differential pair
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current30 A (120 V AC Input)
Power
Consumption
ModelE2720HS
Video input signals• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current30 A (120 V AC Input)
Power
Consumption
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.0 A
60 A (240 V AC Input)
0.2 W (Off Mode)
0.2 W (Standby Mode)
17.9 W (On Mode)
26 W (Max)
13.22 W (Pon)
41.5 kWh (TEC)
1
1
1
2
3
3
• HDMI 1.4 (HDCP 1.2), 600 mV for each differential line,
100 Ω input impedance per differential pair
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.0 A
60 A (240 V AC Input)
0.2 W (Off Mode)
0.2 W (Standby Mode)
19.7 W (On Mode)
30.0 W (Max)
14.03 W (Pon)
44.38 kWh (TEC)
1
1
1
2
3
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon : Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
About your monitor │ 19
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can
be restored by "Factory Reset" function in the OSD menu. Changing the factory
default settings or enabling other features may increase power consumption that
could exceed the ENERGY STAR specified limit.
20 │ About your monitor
Physical characteristics
ModelE1920H/E2020H/E2220H
Signal cable type:
Analog
Digital
NOTE: Dell monitors are designed to work optimally with the video cables that are
shipped with your monitor. As Dell does not have control over the different cable suppliers
in the market, the type of material, connector and process used to manufacture these
cables, Dell does not guarantee video performance on cables that are not shipped with
your Dell monitor.
Dimensions
(with stand):
Height359.60 mm (14.16 in.)
Width
Depth171.00 mm (6.73 in.)171.00 mm (6.73 in.)171.00 mm (6.73 in.)
D-Sub (VGA), 15 pins
(cable is included for EMEA and JPN region only);
DP, 20 pin
E1920HE2020HE2220H
445.40 mm (17.54 in.)
368.96 mm (Maximum)
(14.53 in.) (Maximum)
471.52 mm (Maximum)
(18.56 in.) (Maximum)
397.30 mm (15.64 in.)
512.20 mm (20.17 in.)
Dimensions
(without stand):
Height266.00 mm (10.47 in.)
Width445.40 mm (17.54 in.)
Depth50.10 mm (1.97 in.)50.10mm (1.97 in.)52.40 mm (2.06 in.)
Stand
dimensions:
Height170.00 mm (6.69 in.)170.00 mm (6.69 in.)176.90 mm (6.96 in.)
Width200.00 mm (7.87 in.)200.00 mm (7.87 in.)200.00 mm (7.87 in.)
Depth171.00 mm (6.73 in.)171.00 mm (6.73 in.)171.00 mm (6.73 in.)
WeightE1920HE2020HE2220H
Weight with
packaging
With stand
assembly and
cables
Without stand
assembly and
cables
Weight of stand
assembly
E1920HE2020HE2220H
275.36 mm (Maximum)
(10.84 in.) (Maximum)
471.52 mm (Maximum)
(18.56 in.) (Maximum)
E1920HE2020HE2220H
3.92 kg (8.66 lb)3.94 kg (8.68 lb)4.90 kg (10.80 lb)
2.93 kg (6.46 lb)2.94 kg (6.48 lb)3.51 kg (7.74 lb)
2.19 kg (4.83 lb)2.20 kg (4.85 lb)2.70 kg (5.95 lb)
0.43 kg (0.95 lb)0.43 kg (0.95 lb)0.44 kg (0.97 lb)
303.70 mm (11.96 in.)
512.20 mm (20.17 in.)
About your monitor │ 21
Physical characteristics
ModelE2420H/E2720H
Signal cable type:
Analog
Digital
NOTE: Dell monitors are designed to work optimally with the
video cables that are shipped with your monitor. As Dell does not
have control over the different cable suppliers in the market, the
type of material, connector and process used to manufacture
these cables, Dell does not guarantee video performance on
cables that are not shipped with your Dell monitor.
Dimensions
(with stand):
Height419.70 mm (16.52 in.) 458.10 mm (18.03 in.)
Width550.60 mm (21.68 in.) 621.50 mm (24.46 in.)
Depth171.00 mm (6.73 in.)175.00 mm (6.88 in.)
Dimensions
(without stand):
Height326.50 mm (12.85 in.) 366.30 mm (14.42 in.)
Width550.60 mm (21.68 in.) 621.50 mm (24.46 in.)
Depth52.40 mm (2.06 in.)52.30 mm (2.05 in.)
Stand
dimensions:
Height176.90 mm (6.96 in.)195.50 mm (7.69 in.)
Width200.00 mm (7.87 in.)205.00 mm (8.07 in.)
Depth171.00 mm (6.73 in.)175.00 mm (6.88 in.)
Weight:E2420HE2720H
Weight with
packaging
With stand
assembly and
cables
Without stand
assembly and
cables
Weight of stand
assembly
D-Sub (VGA), 15 pins (cable is included for
EMEA and JPN region only);
DP, 20 pin
E2420HE2720H
E2420HE2720H
E2420HE2720H
5.95 kg (13.12 lb)8.07 kg (17.79 lb)
4.27 kg (9.41 lb)5.88 kg (12.96 lb)
3.25 kg (7.17 lb)4.50 kg (9.92 lb)
0.59 kg (1.30 lb)1.05 kg (2.31 lb)
22 │ About your monitor
Physical characteristics
ModelE2420HS/E2720HS
Signal cable type:
Analog
Digital
NOTE: Dell monitors are designed to work optimally with the
video cables that are shipped with your monitor. As Dell does not
have control over the different cable suppliers in the market, the
type of material, connector and process used to manufacture
these cables, Dell does not guarantee video performance on
cables that are not shipped with your Dell monitor.
Dimensions
(with stand):
Height489.10 mm (19.26 in.)508.30 mm (20.01 in.)
Width550.60 mm (21.68 in.) 621.50 mm (24.46 in.)
Depth187.00 mm (7.36 in.)187.00 mm (7.36 in.)
Dimensions
(without stand):
Height326.50 mm (12.85 in.) 366.30 mm (14.42 in.)
Width550.60 mm (21.68 in.) 621.50 mm (24.46 in.)
Depth52.40 mm (2.06 in.)52.30 mm (2.05 in.)
Stand
dimensions:
Height248.80 mm (9.80 in.)248.80 mm (9.80 in.)
Width220.00 mm (8.66 in.)220.00 mm (8.66 in.)
Depth187.00 mm (7.36 in.)187.00 mm (7.36 in.)
Weight:E2420HSE2720HS
Weight with
packaging
With stand
assembly and
cables
Without stand
assembly and
cables
Weight of stand
assembly
D-Sub (VGA), 15 pins (cable is included for
EMEA and JPN region only);
HDMI, 19 pins