Delfield UCD4427N-6 User Manual

UC4427N Salad Top
Reduced Height Front-Breathing Self-Contained Salad Top Refrigerated Bases
Models
• UC4427N-6 Single section with doors, six pan capacity
• UCD4427N-6 Single section with drawers, six pan capacity
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
UC4427N Salad Top: Reduced Height Front-Breathing Self-Contained Salad Top Refrigerated Bases
UC4427N-6
Specifications
Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. Top of drawer unit has one opening to accept six 1/6-size 4” (10cm) deep pans. Top of door unit has one opening to accept six 1/6-size 4 or 6” (10cm or 15cm) deep pans. Adapter bars and 1/6 size pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 27” x 10” x .5” (68.6cm x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge.
Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance.
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot gas condensate
Standard Features
• Patented air screen ensures product stays cold without drying it out
• All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
• Durable, rugged stainless steel sides, top and front
• Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
• Delfield supplies 1/6 size pans and positive placement adapter bars for top opening
• Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance
• Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board treated with antimicrobial agent
• “D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control: ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 3” (7.6cm) diameter plate casters. Equipment clearance above the floor is 0.66” (1.7cm).
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf.
Drawers have 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Top drawer holds one full size 12” x 20” (30.5cm x 50.8cm) pan and three 1/6 size pans, 4”-6" (10.2cm-15.2cm) deep. Bottom drawer holds one full size 12 x 20" and three 1/6 size 4" deep pans. Pans are supplied by others.
(Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
• Black recessed quick grip handle
• Standard on 3” casters for easy
cleaning and installation
• 6’ cord and plug supplied
• One epoxy coated wire shelf standard,
installed per door section
• ACT solid state electronic control
• Three year parts and labor warranty
and an additional two year compressor parts warranty
Options & Accessories
• Flat lift off cover
• 18” wide single tier overshelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• Door lock
• Exterior thermometer
• 220V/50 Hertz electrical system*
* Inclusion of this option will alter
electrical specifications of the unit
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
www.delfield.com
2.24
21.63
1.69
16.96
12.96
48.13
60.13
64.13
33.08
1.39
28.63
28.63
1.39
2.54
13.63
3.13
13.63
12.96
12.36
25.25
28.63
12.96
13.63
28.37
64.13
2.04
2.42
28.63
12.96
13.63
4.96
STANDARD PAN CONFIGURATIONS
72.1372.13 72.1372.13 72.13
20.75" [52.70]
17.35" [44.08]
26.86" [68.22]
23.79" [60.43]
31.50" [80.01]
NOSE OF UNIT TO EDGE OF DOOR
21.94" [55.73]
SHELF
ALT. SHELF
7.53" [19.10]
12.98" [33.00]
6.11" [15.52]
25.67" [65.20]
22.75" [57.79]
INTERIOR DIMENSION
3.14 [7.97]
9.72 [24.69]
6.06”
[15cm]
9.72“
[25cm]
1.00” [2.5cm]
NOSE OF UNIT TO EDGE OF DOOR
25.67" [65.20]
22.75" [57.79]
INTERIOR DIMENSION
2.75
13.63
12.96
Pan Cutout Conguration
9.72 [24.69]
26.86" [68.22]
31.50" [80.01]
21.94" [55.73]
ALT. SHELF
SHELF
20.75" [52.70]
3.14 [7.97]
6.06”
[15cm]
9.72“
[25cm]
27.13
21.63
2.15 [5.47]
6.14 [15.61]
27.13" [68.91]
2.15 [5.47]
1.00” [2.5cm]
34.25" [87.00]
33.59" [85.31]
23.79" [60.43]
12.98" [33.00]
7.53" [19.10]
17.35" [44.08]
6.11" [15.52]
UC4427N-6 Elevation View
UC4427N-6 Right Side View
Reduced Height Front-Breathing Self-Contained Salad Top Refrigerated
Bases
NOSE OF UNIT
25.67" [65.20] TO EDGE OF DOOR
22.75" [57.79]
INTERIOR DIMENSION
UC4427N-6 ISO View
27.13" [68.91]
6.14 [15.61]
2.15 [5.47] 2.15 [5.47]
33.59" [85.31]
34.25" [87.00]
1.00”
[2.5cm]
9.72 [24.69]
UCD4427N-6 Elevation View UCD4427N-6 Right Side View
31.50" [80.01]
NOSE OF UNIT
19.60" [49.77] TO EDGE OF DRAWER
UCD4427N-6 ISO View
3.14 [7.97]
9.72“
[25cm]
6.06”
[15cm]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
INSTALLATION NOTE:
Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties.
PLEASE NOTE:
UC4427N Salad Top
Air flow through the louver on the back of the unit is not necessary for operation, however, any air which passes through the louver is beneficial.
Specifications
Model
1/6 Size
Pan Cap.
UC4427N-6 6 1 3.17ft
UCD4427N-6 6 NA NA 8.20ft
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
# of
Shelves
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Shelf
Area
Volume H.P. V/Hz/Ph Amps
2
8.20ft
3
1/5 115/60/1 7.2 5-15P 223lbs/101kg
3
1/5 115/60/1 7.2 5-15P 245lbs/111kg
Printed in the U.S.A. DSUC4427N-S 03/13
Nema
Plug
Ship Weight
Loading...