Delfield SSRPT1-G, SSRPT2-G, SSRPT3-G, SSRPT1-GH, SSRPT2-GH General Manual

Specication Line®

Self-Contained Glass Door Pass-Thru Refrigerator

Models

One section Two section Three section

SSRPT1-G SSRPT2-G SSRPT3-G Stainless exterior and interior glass full door

SSRPT1-GH SSRPT2-GH SSRPT3-GH Stainless exterior and interior glass half door

SARPT1-G SARPT2-G SARPT3-G Stainless exterior and aluminum interior glass full door

SARPT1-GH SARPT2-GH SARPT3-GH Stainless exterior and aluminum interior glass half door

SMRPT1-G SMRPT2-G SMRPT3-G Stainless front aluminum exterior and interior glass full door

SMRPT1-GH SMRPT2-GH SMRPT3-GH Stainless front aluminum exterior and interior glass half door

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

Specication Line®: Glass Door Pass-Thru Refrigerator

SARPT2-G

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters axed to the cabinet interior. Pilasters
are removable without tools for cleaning. A uorescent light is
mounted to the interior ceiling of each compartment, the switch is
part of the light assembly. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.

Doors: Glass door models have a glass door on one side and a
solid door on the other. Double paned tempered thermopane glass.

Constructed with a combination of extruded aluminum and PVC. Each
door has two edgemount, self-closing, cam lift style hinges. Doors can

Standard Features

•Stainless steel interior and exterior (SS)

•Stainless steel exterior, aluminum interior (SA)

•Aluminum interior and exterior, stainless front (SM)

•Built in door locks with heavy duty strikes

•Pressure relief valve is standard to prevent door

vapor lock

•Exterior digital thermometer with high/low

temperature alarm

•Easy to use electronic control

•Easy access “ip up” shroud

•Three wire shelves per section - SA/SS standard

with chrome plated shelves and SM standard with
epoxy coated shelves

•10’ attached cord and plug on 115V units

•6” adjustable stainless steel legs

•Stainless steel breaker strips

•High density foamed in place environmentally

friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low

•Energy savings door heater switch

•Two year parts & labor warranty

•Five year compressor warranty

be removed from the cabinet without the use of tools. Door handle
is continuous along vertical dimension of the door. Door gaskets are
magnetic and mount to the door, snapping in place and removable
with out tools. Keyed door lock is mounted to the door. Lock engages
into a heavy duty strike mounted to the cabinet face.

Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled as
one piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. The system has the capability of maintaining
between 33ºF and 40ºF in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Deleld’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reduces compressor cycling and longer
compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical on one and two section units shall
be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and
attached to a junction box mounted on the exterior top of the cabinet.
Three section units shall be 115/208-230 and will require hardwire
connections.

Options &
Accessories

•Security (prison) package

•Door eld rehingability

•Additional shelves

•Tray slides

•Laminate on front, sides and back

•Bottom mount electrical

•Stainless steel banking strip

•Heat shield end

•Stainless steel kick plate

•Laminate kick plate

•4” stainless steel utility base

•230-50-1 electrical

•220-60-1 electrical

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone] or 989-773-7981
Fax: [phone]

www.delfield.com

29.00”

31"

58"

6.12

81.12

29.00

36.25

56.00

36.25

83.00

36.25

SPECIFICATION฀LINE SPECIFICATION฀LINE

56.00

36.25

83.00

36.25

SPECIFICATION฀LINE

83.00

36.25

74cm

56.00”

142cm

83.00”

211cm

25.00”
64cm

PLAN VIEW

SSRPT1-G, SARPT1-G, SMRPT1-G

SSRPT1-GH, SARPT1-GH, SMRPT1-GH

ELEVATION VIEW

SSRPT1-G, SARPT1-G,

SMRPT1-G

36.25”
92cm

SPECIFICATION LINE

SSRPT1-GH, SARPT1-GH,

SPECIFICATION฀LINE

ELEVATION VIEW

SMRPT1-GH

52.00”

132cm

PLAN VIEW

SSRPT2-G, SARPT2-G, SMRPT2-G

SSRPT2-GH, SARPT2-GH, SMRPT2-GH

ELEVATION VIEW

SSRPT2-G, SARPT2-G,

SMRPT2-G

36.25”
92cm

79.00”

201cm

PLAN VIEW

SSRPT3-G, SARPT3-G, SMRPT3-G

SSRPT3-GH, SARPT3-GH, SMRPT3-GH

SPECIFICATION LINE

ELEVATION VIEW

SSRPT2-GH, SARPT2-GH,

SMRPT2-GH

SPECIFICATION฀LINE

36.25”
92cm

Self-Contained Glass Door Pass-Thru Refrigerator

SPECIFICATION LINE

ELEVATION VIEW

SSRPT3-G, SARPT3-G, SMRPT3-G

SSRPT3-GH, SARPT3-GH, SMRPT3-GH

ELEVATION VIEW

SPECIFICATION฀LINE

75.00"
191cm

31.00"

81.12”

216cm

6.12”

16cm

79cm

58.00"

147cm

END VIEW

ALL MODELS

Mechanical Data

MODEL NUMBER V/Hz/Ph AMPS

SSRPT1-G, SSRPT1-GH, SARPT1-G,

SARPT1-GH, SMRPT1-G, SMRPT1-GH

SSRPT2-G, SSRPT2-GH, SARPT2-G,

SARPT2-GH, SMRPT2-G, SMRPT2-GH

SSRPT3-G, SSRPT3-GH, SARPT3-G,

Specication Line®

SARPT3-GH, SMRPT3-G, SMRPT3-GH

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

115/60/1 7.8 26.64 12.81 3 1/3 2488

115/60/1 16.0 55.42 27.54 6 1/2 5465

115/208-230

/60/1

Phone: [phone] or 989-773-7981
Fax: [phone]
www.delfield.com

STORAGE

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

CU.FT.

12.4 84.19 42.27 9 3/4 7569

Printed in the U.S.A.
DSSSRPT-G
08/11

BTU/HR

SYSTEM CAP

SHIP

WEIGHT

455lbs

(206kg)

700lbs

(318kg)

972lbs

(441kg)

NEMA

ENERGY

PLUG

(KWH)

5-15P 4.58

5-20P 8.16

N/A N/A