Specication Line®
Self-Contained Sliding Door Two Section Shallow
Reach-In Refrigerator
Models
Solid door Glass door
SSR2S-SLS SSR2S-SLG Stainless exterior and interior full sliding door
SSR2S-SLSH SSR2S-SLGH Stainless exterior and interior half sliding door
SAR2S-SLS SAR2S-SLG Stainless exterior and aluminum interior full sliding door
SAR2S-SLSH SAR2S-SLGH Stainless exterior and aluminum interior half sliding door
SMR2S-SLS SMR2S-SLG Stainless front aluminum exterior and interior full sliding door
SMR2S-SLSH SMR2S-SLGH Stainless front aluminum exterior and interior half sliding door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
Specication Line®: Sliding Door Two Section Shallow Reach-In Refrigerator
SSR2S-SLG
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters affixed to the cabinet interior. Pilasters
are removable without tools for cleaning. Mounted to the interior
ceiling, the interior fluorescent light is controlled automatically
through a switch mounted in the hinge assembly to protect against
breakage. Door openings are protected with heavy gauge stainless
steel breaker strips. An air duct shall be mounted to the ceiling
assuring low velocity, even air movement throughout the cabinet
interior.
Doors:
Solid Sliding. Exterior and interior shall be corrosion resistant
stainless steel.
Standard Features
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front (SM)
Pressure relief valve is standard to prevent door
•
vapor lock
Exterior digital thermometer with high/low
•
temperature alarm
• Easy access “flip up” shroud
• Easy to use electronic control
• Three wire shelves per section - SA/SS standard
with chrome plated shelves and SM standard with
epoxy coated shelves
• 10’ attached cord and plug
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
High density foamed in place environmentally
•
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
• Energy savings door heater switch
• Environmentally friendly 404a refrigerant
• Fluorescent light with on/off switch (glass door
units only)
Two year parts & labor warranty
•
• Five year compressor warranty
Glass Sliding. Double thermopane glass set in high impact black
plastic frame.
Doors are set in tracks for easy movement. Spring action assures
self closing. Gasket seals both ends of doors. Doors are removable
for cleaning.
Refrigeration system: All components are mounted to the ex terior
cabinet ceiling, outside the food zone and are assembled as one
piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. System has the capability of maintaining
between 27˚F and 40˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive ther mostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and operating at optimum efficienc y. Evaporator condensate
is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60Hz,
single phase. A 10’ cord and plug is supplied attached to a junction
box mounted on the exterior top of the cabinet.
Options &
Accessories
• Additional shelves
• Tray slides
• Stainless steel back
• Laminate on front, sides and back
• Bottom mount electrical
• Stainless steel banking strip
• Heat shield end
• Stainless steel kick plate
• Laminate kick plate
• 4” stainless steel utility base
• 220-60-1 electrical
• 230-50-1 electrical
• Security package
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
PLAN VIEW
56.00”
142.2cm
34.00”
86.4cm
56.00
34.00
56.00
34.00
52.00”
132.1cm
56.00”
142.2cm
34.00”
86.4cm
56.00”
142.2cm
34.00”
86.4cm
56.00
34.00
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
52.00”
132.1cm
56.00”
142.2cm
26.00”
66.0cm
52.00”
132.1cm
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
30.00”
76.2cm
52.00”
132.1cm
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
22.00”
55.9cm
56.00”
142.2cm
34.00”
86.4cm
56.00
34.00
56.00
34.00
56.00”
142.2cm
26.00”
66.0cm
52.00”
132.1cm
52.00”
132.1cm
56.00”
142.2cm
34.00”
86.4cm
56.00
34.00
56.00
34.00
26.00”
66.0cm
52.00”
132.1cm
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
22.00”
55.9cm
ALL MODELS
ELEVATION VIEW
SSR2S-SLS, SAR2S-SLS
SMR2S-SLS
ELEVATION VIEW
SSR2S-SLSH, SAR2S-SLSH,
SMR2S-SLSH
ELEVATION VIEW
SSR2S-SLG, SAR2S-SLG,
SMR2S-SLG
ELEVATION VIEW
SSR2S-SLGH, SAR2S-SLGH,
SMR2S-SLGH
Self-Contained Slid ing Door Two Section Sh allow Rea ch-In Refrigerator
END VIEW
ALL MODELS
Mechanical Data
STORAGE
CU.FT.
SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.
Printed in the U.S.A.
DSSSRS-SL
06/08
MODEL NUMBER VOLTAGE AMPS
Specication Line®
Deleld reserves the right to make changes to the design or specications without prior notice.
SSR2S-SLS, SSR2S-SLSH,
SAR2S-SLS, SAR2S-SLSH,
SMR2S-SLS, SMR2S-SLSH
SSR2S-SLG, SSR2S-SLGH,
SAR2S-SLG, SAR2S-SLGH,
SMR2S-SLG, SMR2S-SLGH
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
115 7.8 37.96 27.54 6 1/3 2488
115 7.8 37.96 27.54 6 1/3 2488
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
BTU/HR
SYSTEM CAP
SHIP
WEIGHT
670lbs
(304kg)
670lbs
(304kg)
NEMA
ENERGY
PLUG
(KWH)
5-15P N/A
5-15P N/A