Delfield SSR2-SLS, SSR2-SLG, SSR2-SLSH, SSR2-SLGH, SAR2-SLS General Manual

...
Delfield
®
Specication Line®
Self-Contained Sliding Door Reach-In Refrigerator
Models
Solid door Glass door
SSR2-SLS SSR2-SLG 2 section stainless exterior and interior full sliding door
SSR2-SLSH SSR2-SLGH 2 section stainless exterior and interior half sliding door
SAR2-SLS SAR2-SLG 2 section stainless exterior and aluminum interior full sliding door
SAR2-SLSH SAR2-SLGH 2 section stainless exterior and aluminum interior half sliding door
SMR2-SLS SMR2-SLG 2 section stainless front aluminum exterior and interior full sliding door
SMR2-SLSH SMR2-SLGH 2 section stainless front aluminum exterior and interior half sliding door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity ________________ ________________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ ____________________ ____________
Specication Line®: Sliding Door Reach-In Refrigerator
SSR2-SLG
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Doors:
Solid Sliding. Exterior and interior shall be corrosion resistant stainless steel.
Standard Features
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front (SM)
• Pressure relief valve is standard to prevent door vapor lock
• Exterior digital thermometer with high/low temperature alarm
• Easy access “flip up” shroud
• Easy to use electronic control
• Three wire shelves per section - SA/SS standard with chrome plated shelves and SM standard with epoxy coated shelves
• 10’ attached cord and plug
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
• Environmentally friendly 404a refrigerant High density foamed in place environmentally
• friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
• Energy savings door heater switch
• Fluorescent light with on/off switch (glass door units only) Two year parts & labor warranty
• Five year compressor warranty
Glass Sliding. Double thermopane glass set in high impact black plastic frame.
Doors are set in tracks for easy movement. Spring action assures self closing. Gasket seals both ends of doors. Doors are removable for cleaning.
Refrigeration system: All components are mounted to the ex terior cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. System has the capability of maintaining between 27˚F and 40˚F in heavy use food service operations. Refrigerant is metered using a highly responsive ther mostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reducing compressor cycling and longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free of ice and operating at optimum efficienc y. Evaporator condensate is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60Hz, single phase. A 10’ cord and plug is supplied attached to a junction box mounted on the exterior top of the cabinet.
Options & Accessories
• Additional shelves
• Tray slides
• Stainless steel back
• Laminate on front, sides and back
• Bottom mount electrical
• Stainless steel banking strip
• Heat shield end
• Stainless steel kick plate
• Laminate kick plate
• 4” stainless steel utility base
• 220-60-1 electrical
• 230-50-1 electrical
• Security package
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
www.delfield.co m
Delfield
®
PLAN VIEW
SPECIFICATION LINE
SPECIFICATION LINE
56.00”
142.2cm
34.00”
86.4cm
52.00”
132.1cm
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
30.00”
76.2cm
SPECIFICATION LINE
SPECIFICATION LINE
ALL MODELS
Self-Contained Slid ing Door R eac h-I n Refrigerator
Specication Line®
Mechanical Data
MODEL NUMBER VOLTAGE AMPS
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
ELEVATION VIEW
SSR2-SLS, SAR2-SLS, SMR2-SLS
ELEVATION VIEW
SSR2-SLG, SAR2-SLG, SMR2-SLG
SSR2-SLS, SSR2-SLSH, SAR2-SLS, SAR2-SLSH, SMR2-SLS, SMR2-SLSH
SSR2-SLG, SSR2-SLGH,
SAR2-SLG, SAR2-SLGH, SMR2-SLG, SMR2-SLGH
ELEVATION VIEW
SSR2-SLSH, SAR2-SLSH, SMR2-SLSH
ELEVATION VIEW
SSR2-SLGH, SAR2-SLGH, SMR2-SLGH
STORAGE
SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.
CU.FT.
115 9.0 51.92 27.54 6 1/3 3226
115 9.0 51.92 27.54 6 1/3 3226
Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619 www.delfield.co m
Printed in the U.S.A. DSSSR-SL 06/08
BTU/HR
SYSTEM CAP
END VIEW
ALL MODELS
SHIP
WEIGHT
670lbs
(304kg)
670lbs
(304kg)
NEMA
ENERGY
PLUG
(KWH)
5-15P N/A
5-15P N/A
Loading...