Delfield SAHRI1-S, SSHRI1-S, SMHRI1-S User Manual
Delfield
™
®
Specication Line®
Self-Contained Solid Door Heated Roll-In
Models
One section Two section Three section
SSHRI1-S SSHRI2-S SSHRI3-S Stainless exterior and interior full door
SAHRI1-S SAHRI2-S N/A Stainless exterior and aluminum interior full door
SMHRI1-S SMHRI2-S N/A Stainless front aluminum exterior and interior full door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
Specication Line®: Solid Door Heated Roll-In
SSHRI2-S
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed oor. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a switch
mounted in the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.
Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be stainless steel. Each door has two edge mount, self
closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Metal door handle shall be recessed into the
Standard Features
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior
•
(SA)
Aluminum interior and exterior, stainless
•
front (SM)
Built in door locks with heavy duty strikes
•
Recessed metal door handle
•
Exterior digital thermometer with high/
•
low temperature alarm
Easy to use electronic control
•
Easy access “ip up” shroud
•
High density foamed in place
•
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Stainless steel breaker strips
•
Stainless steel interior door liner
•
Two year parts & labor warranty
•
door for easy grip without impacting aisle space. Keyed door lock is
mounted in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are magnetic
and mount to the door snapping in place and are removable without
tools.
Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped,
with tubular ns. High speed blower provides uniform airow in
the cabinet. Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled as one piece
and can be removed as one piece. Temperature is controlled by an
adjustable electronic thermostat. System on/o switch is located on
the front exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.
Options &
Accessories
•
•
•
•
•
•
•
Security (prison) package
Door eld rehingability
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
Delfield
™
®
PLAN VIEW
34.00”
86.4cm
34.00”
86.4cm
66.00”
167.6cm
98.00”
248.9cm
30.00”
76.2cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
66.00”
167.6cm
98.00”
248.9cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
98.00”
248.9cm
34.00”
86.4cm
94.00”
238.8cm
30.00"
76.2cm
72.00"
182.9cm
89.00”
226.1cm
34.00”
86.4cm
34.00”
86.4cm
66.00”
167.6cm
98.00”
248.9cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
30.00”
76.2cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
66.00”
167.6cm
98.00”
248.9cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
98.00”
248.9cm
34.00”
86.4cm
94.00”
238.8cm
30.00"
76.2cm
72.00"
182.9cm
89.00”
226.1cm
66.00”
167.6cm
98.00”
248.9cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
SSHRI1-S, SAHRI1-S,
SMHRI1-S
PLAN VIEW
SSHRI2-S, SAHRI2-S, SMHRI2-S
PLAN VIEW
SSHRI3-S
ELEVATION VIEW
SSHRI1-S, SAHRI1-S,
SMHRI1-S
ELEVATION VIEW
SSHRI2-S, SAHRI2-S,
SMHRI2-S
ELEVATION VIEW
SSHRI3-S
Self-Contained Solid Do or Heated Roll-In
Mechanical Data
MODEL NUMBER VOLTAGE AMPS
SSHRI1-S, SAHRI1-S, SMHRI1-S 120/208-240 9.0 36.15 N/A N/A N/A 2160
Specication Line®
SSHRI2-S, SAHRI2-S, SMHRI2-S 120/208-240 12.2 74.72 N/A N/A N/A 3840
SSHRI3-S 120/208-240 10.0 113.28 N/A N/A N/A 4272
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
STORAGE
CU.FT.
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
SHELVES SQ.FT.
Printed in the U.S.A.
DSSSHRI
09/08
NO. OF
SHELVES
ALL MODELS
UNIT H.P. MAX WATTS SHIP WEIGHT
459lbs
(208kg)
704lbs
(319kg)
1008lbs
(457kg)
END VIEW
NEMA
PLUG
N/A N/A
N/A N/A
N/A N/A
ENERGY
(KWH)
Loading...