Delfield Shelleymatic FFSC-2, Shelleymatic FFSC-3324 Specifications

Model FFSC-2

PROJECT

ITEM #

QUANTITY DATE

APPROVAL

FFSC

Built-in self-contained ice cream dispensers

Short form specications

The exterior sides and top edge shall be 20-gauge galvanized steel.

Exterior bottom to be 14-gauge galvanized steel.

Inner liner shall be water-tight and constructed of 22-gauge stainless
steel with a 1.25" (3.2cm) I.P.S. drain. Opening(s) shall have throat liners
constructed of high impact plastic. Unit to be insulated with foamed-in-place
polyurethane insulation with a non-conductive top breaker strip.

Each opening shall have an insulated, stainless steel folding lid with high
impact plastic liner, molded rubber edge and black plastic handles.

(1) stainless steel louver shall be provided for installation in the cabinet to
allow proper air ow to the condensing unit.

Each self-leveling mechanism shall be eld adjustable by adding or remov­ing stainless steel extension springs in the elevator housing inside the
unit. The elevators shall be connected by removable platform carriers
constructed of 18-gauge stainless steel.

(6) anodized aluminum divider trays will be supplied per opening. NOTE:
See chart on back for ice cream storage capacity.

Refrigeration system shall use HFC-404A refrigerant. Refrigerant ow
shall be controlled by an expansion valve. Cabinet shall maintain 0°F to 5°F
(–18°C to –15°C) temperature with lids closed for storage.

Refrigeration system shall be controlled by a pressure control, located
near the condensing unit.

Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall
have a 9' (2.7m) long electrical cord and NEMA 5-15P installed at the
mechanical end.

Optional accessories & modications

• Lid locking device

• Wire baskets

• *Special voltages (contact factory)

*Inclusion of this option will alter the electrical

specications of the unit.

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

FFSC

28.50"

72.4cm

26.75"

67.9cm

14.50"

36.8cm

2.62"

6.7cm

1.87"

4.8cm

26.25"

66.7cm

28.25"

71.8cm

28.00"

71.1cm

26.25"

66.7cm

2.62"

6.7cm

1.87"

4.8cm

2.75"

7.0cm

42.00"

106.7cm

26.75"

67.9cm

28.25"

71.8cm

MODEL NUMBER

CUTOUT DIMENSIONS
(L x D) CAPACITY

HORSE­POWER AMPS BTU LOAD

BTU
CAPACITY

SHIP
WEIGHT

FFSC-3324

(1) 10.75" x 21.00"

(1) 27.3cm x 53.3cm

210 half pint

cartons

1/4 6.0 430 770

308 lbs

140 kg

FFSC-2

(2) 10.75" x 21.00"*

(2) 27.3cm x 53.3cm*

420 half pint

cartons

6.0 710 925

408 lbs

185 kg

* requires 2.75" (7.0cm) between each cutout

1/4

12.50"

31.8cm

LENGTH

DEPTH

Built-in self-contained ice cream dispensers

INSTALLATION NOTE:

Refrigeration system is
designed so that air will
ow into the compressor
area through the provided
louver. Any restriction to
this air ow path will void
the warranties.

PLAN VIEW
MODEL FFSC-3324

ELEVATION VIEW
MODEL FFSC-3324

PLAN VIEW
MODEL FFSC-2

ELEVATION VIEW
MODEL FFSC-2

RIGHT END VIEW
ALL FFSC MODELS

CUTOUT ORIENTATION

(PLAN VIEW)

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

LID OPENING DETAIL

ALL FFSC MODELS

MSFFSC 10/01