Delfield Shelleyglas KCSC-36-EF, Shelleyglas KCSC-60-EF, Shelleyglas KCSC-74-EF, Shelleyglas KCSC-96-EF, KCSC-EF Specifications

...
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
KCSC-EF
Mobile Self-Contained LiquiTec™ Cold Pan Serving Counters
Short Form Specifications
molded fiberglass, having perfectly smooth exterior surface with all cor­ners fully rounded. The fiberglass rein­forced polyester (F.R.P.) is molded with permanent color. Stress points are internally reinforced.
Exterior top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit.
The LiquiTec cold pan has 2-6 die stamped 19.87" x 11.87" (50.5cm x
30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5" drain mainfold to gate valve. Each well, flush with the top, for flush mount pans to accommo­date 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained at 86˚F (30˚C) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation.
Refrigeration system uses HFC-404A refrigerant and has a self-contained 115 volt, 60 Hertz, single phase her­metically sealed condensing unit with adjustable cold pan pressure control. Unit is wired with a 3-wire, grounded, maximum 10’ (3m) cord and plug. Unit has an on/off switch mounted on the exterior.
Casters: Unit is mounted on 5” (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assem­bly is 6.00” (15.2cm).
Optional Accessories and Modifications:
A) 12” (30.5cm) wide stainless steel
fold-down tray slide
C) 10” (25.4cm) wide three-bar fold-
down tray slide
D) 10” (25.4cm) wide composite fold-
down cutting board
E) 10” (25.4cm) wide stainless steel
fold-down work shelf
F) Line-up interlock device G) Glass-front counter protector H) Two tier display with glass shelves
and sneeze guards
HD) Dual service two tier display with
sneeze guards
I) T hree tier diplay with glass shelve\
and sneeze guards
J) 12” (30.5cm) wide 18-gauge stain-
less steel overshelf
KS) Single service flip-up sneeze guard KD) Double service flip-up sneeze guard L) *Fluorescent light fixtures LI) *Incandescent light fixtures P) Open understorage with shelf Q) *120V/60Hz/1ø, 10 amp conve-
nience outlet with breaker
U) 14” x 30” (35.6cm x 76.2cm) stain-
less steel end drop shelf
UU) Molded fiberglass trim strips V) 6” (15.2cm) high adjustable stain-
less steel legs
*Inclusion of these options will alter the elec­trical specifications of unit.
Model KCSC-EF
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
KCSC-36-EF
KCSC-96-EF
KCSC-74-EF
KCSC-60-EF
KCSC-50-EF
Isometric
View
KCSC-36-EF
KCSC-96-EF
KCSC-74-EF
KCSC-60-EF
KCSC-50-EF
Plan View
Unit on/off switch
Drain Valve
36.00"
91.44cm
30.00"
76.2cm
KCSC-EF
Mobile Self-Contained LiquiTec™ Cold Pan Serving Counters
50.00" 127cm
96.00"
30.00"
76.2cm
243.84cm
30.00"
76.2cm
60.00"
152.4cm
30.00"
76.2cm
74.00"
187.96cm
30.00"
76.2cm
1.62.00"
4.11cm
1.64"
4.16cm
1.14"
2.89cm
36"
91.44cm
20.00"
50.8cm
6.00"
15.24cm
Mechanical Data — Standard Unit
NUMBER PHASE AMP H.P. PLUG LBS./KG. BTU
KCSC-36-EF KCSC-50-EF KCSC-60-EF KCSC-74-EF KCSC-96-EF
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MODEL VOLTAGE/HERTZ/ NEMA SHIP WEIGHT SYSTEM
115/60/1 8.0 1/4 5-15P 350/159 1102
115/60/1 8.0 1/4 5-15P 425/193 1240
115/60/1 8.0 1/4 5-15P 500/227 1343
115/60/1 8.0 1/4 5-15P 575/261 1423
115/60/1 8.0 1/4 5-15P 650/295 1487
GSEF 04/02
Loading...