Delfield SAW1-S User Manual

Specication Line®

Self-Contained Solid Door Wine Cabinet Reach-In

Models

One section Two section Three section

SSW1-S SSW2-S SSW3-S Stainless exterior and interior full door

SSW1-SH SSW2-SH SSW3-SH Stainless exterior and interior half door

SAW1-S SAW2-S SAW3-S Stainless exterior and aluminum interior full door

SAW1-SH SAW2-SH SAW3-SH Stainless exterior and aluminum interior half door

SMW1-S SMW2-S SMW3-S Stainless front aluminum exterior and interior full door

SMW1-SH SMW2-SH SMW3-SH Stainless front aluminum exterior and interior half door

Specication Line®: Solid Door Wine Cabinet Reach-In

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity _________________ _______________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ _____________________ ___________

SSW2-SH

Specifications

Exterior: Cabinet exterior sides, front and shroud shall be corrosion
resistant stainless steel (SS & SA series). Exterior sides shall be
aluminum (SM series). Upper shroud shall be hinged, with stay-open
feature to provide easy access to refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA models). Bottom and
top surfaces are die stamped to provide radius corners and recessed
floor. Three chrome plated wine shelves are provided per section.
Shelves rest on clips which are adjustable in 1” increments on
stainless steel pilasters affixed to the cabinet interior. Each section
can hold up to 8 wine shelves. Each wine shelf holds 10 to 12
bottles. Pilasters are removable without tools for cleaning. Interior
incandescent light mounted to the interior ceiling is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct is mounted to the
ceiling assuring low velocity, even air movement throughout the
cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material, formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from cabinet without the use of tools. Metal door
handle is recessed into the door for easy grip without impacting aisle

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Stainless steel door and upper housing,
aluminum interior and exterior (SM)

• Built in door locks with heavy duty strikes

• Recessed metal door handle

• Pressure relief valve is standard to prevent
door vapor lock

• Exterior digital thermometer with high/low
temperature alarm

• Easy to use electronic control

• Easy access “flip up” shroud

• Three chrome plated wine shelves per section

• 10’ attached cord and plug

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps
energy costs low

• Energy savings door heater switch

• Two year parts & labor warranty

• Five year compressor warranty

space. Keyed door lock is mounted in the door next to the handle.
Lock engages into a heavy duty strike mounted to the cabinet face.
Door gaskets are magnetic and mount to the door snapping in place
and are removable without tools.

Refrigeration system: All components are mounted to the ex terior
cabinet ceiling, outside the food zone and are assembled as one
piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. System has the capability of maintaining
between 50˚F and 60˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive ther mostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and longer
compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and operating at optimum efficienc y. Evaporator condensate
is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60Hz,
single phase. A 10’ cord and plug is supplied attached to a junction
box mounted on the exterior top of the cabinet.

Options &
Accessories

• Stainless steel interior door liner

• Door field rehingability

• 6” polyurethane casters

• Additional shelves

• Tray slides

• Stainless steel back

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

Phone: [phone] or 989 -773-7981
Fax: [phone]

www.delfield.co m

PLAN VIEW

29.00”

73.7cm

34.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

25.00"

63.5cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

83.00”

210.8cm

79.00"

200.7cm

34.00”

86.4cm

30"

58"

6.12

81.12

29.00”

73.7cm

34.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

25.00"

63.5cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

30.00"

76.2cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

205.0cm

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

75.00”

190.5cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

56.00

34.00

83.00

34.00

83.00

34.00

83.00”

210.8cm

79.00"

200.7cm

34.00”

86.4cm

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

30.00”

76.2cm

SSW1-S, SAW1-S, SMW1-S

SSW1-SH, SAW1-SH, SMW1-SH

PLAN VIEW

SSW2-S, SAW2-S, SMW2-S

SSW2-SH, SAW2-SH, SMW2-SH

PLAN VIEW

SSW3-S, SAW3-S, SMF3-S

SSW3-SH, SAW3-SH, SMW3-SH

ELEVATION VIEW
SSW1-S, SAW1-S,

SMW1-S

ELEVATION VIEW

SSW1-SH, SAW1-SH,

SMW1-SH

ELEVATION VIEW

SSW2-S, SAW2-S, SMW2-S

ELEVATION VIEW

SSW2-SH, SAW2-SH, SMW2-SH

END VIEW

ALL MODELS

Self-Contained Solid Do or Wine Cabinet Reach-In

ELEVATION VIEW

SSW3-S, SAW3-S, SMW3-S

ELEVATION VIEW

SSW3-SH, SAW3-SH, SMW3-SH

WINE SHELF

ALL MODELS

Mechanical Data

STORAGE

CU.FT.

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

Printed in the U.S.A.
DSSSW
10/10

MODEL NUMBER VOLTAGE AMPS

SSW1-S, SSW1-SH, SAW1-S,

Specication Line®

Deleld reserves the right to make changes to the design or specications without prior notice.

SAW1-SH, SMW1-S, SMW1-SH

SSW2-S, SSW2-SH, SAW2-S,

SAW2-SH, SMW2-S, SMW2-SH

SSW3-S, SSW3-SH, SAW3-S,

SAW3-SH, SMW3-S, SMW3-SH

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

115 6.8 24.96 12.81 3 1/4 2092

115 9.0 51.92 27.54 6 1/3 3226

115 16.0 78.89 42.47 9 1/2 5465

Phone: [phone] or 989 -773-7981
Fax: [phone]
www.delfield.co m

BTU/HR

SYSTEM CAP

SHIP

WEIGHT

418lbs

(190kg)

650lbs

(295kg)

830lbs

(376kg)

NEMA

PLUG

5-15P N/A

5-15P N/A

5-20P N/A

ENERGY

(KWH)