Delfield SMRRT2-S, SSRRT1-S, SSRRT3-S, SARRT2-S, SSRRT2-S User Manual

Delfield

™

®

Specication Line®

Self-Contained Solid Door Refrigerated Roll-Thru

Models

One section Two section Three section

SSRRT1-S SSRRT2-S SSRRT3-S Stainless exterior and interior full door

SARRT1-S SARRT2-S SARRT3-S Stainless exterior and aluminum interior full door

SMRRT1-S SMRRT2-S SMRRT3-S Stainless front aluminum exterior and interior full door

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity _________________ _______________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ _____________________ ___________

Specication Line®: Solid Door Refrigerated Roll-Thru

SSRRT1-S

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed oor. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a switch
mounted in the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.

Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from the cabinet without the use of tools. Metal
door handle shall be recessed into the door for easy grip without

Standard Features

Stainless steel interior and exterior (SS)

•
Stainless steel exterior, aluminum

•
interior (SA)
Aluminum interior and exterior, stainless

•
front (SM)
Built in door locks with heavy duty

•
strikes
Recessed metal door handle

•
Pressure relief valve is standard to

•
prevent door vapor lock
Exterior digital thermometer with high/

•

Options &
Accessories

•

•

•

•

•

•

•

•

low temperature alarm
Easy to use electronic control

•
Easy access “ip up” shroud

•
Tough ABS interior door liners

•
10’ attached cord and plug on 115V units

•
Stainless steel breaker strips

•
High density foamed in place

•
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Energy savings door heater switch

•
Two year parts & labor warranty

•
Five year compressor warranty

•

impacting aisle space. Keyed door lock is mounted in the door next
to the handle. Lock engages into a heavy duty strike mounted to
the cabinet face. Door gaskets are magnetic and mount to the door
snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece. Environmentally
friendly R404A refrigerant is used. The system has the capability
of maintaining between 27ºF and 40ºF in heavy use food service
operations. Refrigerant is metered using a highly responsive
thermostatic expansion valve. System is controlled using Deleld’s
ACT-Advanced Control Technology electronic temperature control,
which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical on one and two section units shall
be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and
attached to a junction box mounted on the exterior top of the
cabinet. Three section units shall be 115/208-230 and will require
hardwire connections.

Security (prison) package
Door eld rehingability
Laminate on front, sides and
back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
230-50-1 electrical
220-60-1 electrical

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

Phone: [phone] or 989 -773-7981
Fax: [phone]

www.delfield.co m

Delfield

™

®

PLAN VIEW

34.00”

86.4cm

36.25”

92.1cm

66.00”

167.6cm

98.00”

248.9cm

30.00”

76.2cm

36.25”

92.1cm

62.00”

157.5cm

36.25”

92.1cm

94.00”

238.8cm

66.00”

167.6cm

98.00”

248.9cm

36.25”

92.1cm

62.00”

157.5cm

36.25”

92.1cm

94.00”

238.8cm

98.00”

248.9cm

36.25”

92.1cm

94.00”

238.8cm

31.00"

78.7cm

72.00"

182.9cm

89.00”

226.1cm

34.00”

86.4cm

36.25”

92.1cm

66.00”

167.6cm

98.00”

248.9cm

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

30.00”

76.2cm

36.25”

92.1cm

62.00”

157.5cm

36.25”

92.1cm

94.00”

238.8cm

66.00”

167.6cm

98.00”

248.9cm

36.25”

92.1cm

62.00”

157.5cm

36.25”

92.1cm

94.00”

238.8cm

98.00”

248.9cm

36.25”

92.1cm

94.00”

238.8cm

90.50”

229.9cm

72.00”

182.9m

31.00”

78.7cm

31.00"

78.7cm

72.00"

182.9cm

89.00”

226.1cm

66.00”

167.6cm

98.00”

248.9cm

36.25”

92.1cm

62.00”

157.5cm

94.00”

238.8cm

SSRRT1-S, SARRT1-S,

SMRRT1-S

PLAN VIEW

SSRRT2-S, SARRT2-S, SMRRT2-S

PLAN VIEW

SSRRT3-S, SARRT3-S, SMRRT3-S

ELEVATION VIEW

SSRRT1-S, SARRT1-S,

SMRRT1-S

ELEVATION VIEW

SSRRT2-S, SARRT2-S,

SMRRT2-S

ELEVATION VIEW

SSRRT3-S, SARRT3-S,

SMRRT3-S

Self-Contained Solid Do or Refrigerated Ro ll-Thru

END VIEW

1 SECTION UNITS

Mechanical Data

STORAGE

CU.FT.

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

MODEL NUMBER VOLTAGE AMPS

SSRRT1-S, SARRT1-S, SMRRT1-S

Specication Line®

SSRRT2-S, SARRT2-S, SMRRT2-S

SSRRT3-S, SARRT3-S, SMRRT3-S

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

115 7.8 38.58 N/A N/A 1/3 2488

115 16.0 79.74 N/A N/A 1/2 5465

115/208-230 11.3 120.90 N/A N/A 3/4 7569

Phone: [phone] or 989 -773-7981
Fax: [phone]
www.delfield.co m

Printed in the U.S.A.
DSSSRRT
06/08

BTU/HR

SYSTEM CAP

END VIEW

2 & 3 SECTION UNITS

SHIP

WEIGHT

514lbs

(233kg)

776lbs

(352kg)

1116lbs
(506kg)

NEMA

PLUG

5-15P 6.77

5-20P 9.06

N/A 8.01

ENERGY

(KWH)