Delfield SSRPT2S-S, SARPT1S-SH, SARPT2S-SH General Manual

			Project __________________________________
			Item ____________________________________
			Quantity	________________________________
Speciication Line®			CSI Section 11400
			Date ____________________________________
			Approved	_______________________________
Self-Contained Shallow Solid Door Pass-Thru Refrigerator
Models
One section	Two section
SSRPT1S-S	SSRPT2S-S	Stainless exterior and interior full door
SSRPT1S-SH	SSRPT2S-SH	Stainless exterior and interior half door
SARPT1S-S	SARPT2S-S	Stainless exterior and aluminum interior full door
SARPT1S-SH	SARPT2S-SH	Stainless exterior and aluminum interior half door
SMRPT1S-S	SMRPT2S-S	Stainless front aluminum exterior and interior full door
SMRPT1S-SH	SMRPT2S-SH	Stainless front aluminum exterior and interior half door

Standard Features

		• Stainless steel interior and exterior (SS)
		• Stainless steel exterior, aluminum interior
		(SA)
		• Aluminum interior and exterior, stainless
		front (SM)
		• Built in door locks with heavy duty strikes
		• Recessed metal door handle
		• Pressure relief valve is standard to prevent
		door vapor lock
		• Exterior digital thermometer with high/low
		temperature alarm
		• Easy to use electronic control
		• Easy access “lip up” shroud
		• Three wire shelves per section - SA/SS
		standard with chrome plated shelves and
		SM standard with epoxy coated shelves
		• Tough ABS interior door liners
		• 10’ attached cord and plug
		• 6” adjustable stainless steel legs
		• Stainless steel breaker strips
		• High density foamed in place
		environmentally friendly, Kyoto Protocol
		Compliant, Non ODP (Ozone Depletion
	SSRPT2S-S	Potential), Non GWP (Global Warming
		Potential) polyurethane keeps energy
		costs low
		• Energy savings door heater switch
		• Two year parts & labor warranty
		• Five year compressor warranty

Options &

Accessories

•Security (prison) package

•6” polyurethane casters

•Door ield rehingability

•Stainless steel interior door liner

•Additional shelves

•Laminate on front, sides and back

•Bottom mount electrical

•Stainless steel banking strip

•Heat shield end

•Stainless steel kick plate

•Laminate kick plate

•4” stainless steel utility base

•230-50-1 electrical

•220-60-1 electrical

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed loor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters aixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal

door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled

as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor

cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum eiciency. Evaporator condensate is eliminated using an energy eicient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981
	Mt. Pleasant, Michigan 48858		www.delfield.com
		Fax: [phone]

<![if ! IE]>

<![endif]>Refrigerator Thru-Pass Door Solid Shallow Line®: Speciication

<![if ! IE]>

<![endif]>Speciication Line® Self-Contained Shallow Solid Door Pass-Thru Refrigerator

29.00” 73.7CM

25.00" 63.5CM 28.25”

71.8CM

	56.00”
	142.2CM
	52.00"	28.25”
	132.1CM
		71.8CM

PLAN VIEW

PLAN VIEW

SSRPT1S-S, SARPT1S-S,

SSRPT2S-S, SARPT2S-S, SMRPT2S-S

SMRPT1S-S, SSRPT1S-SH,

SSRPT2S-SH, SARPT2S-SH, SMRPT2S-SH

SARPT1S-SH, SMRPT1S-SH

ELEVATION VIEW	ELEVATION VIEW	ELEVATION VIEW	ELEVATION VIEW
SSRPT1S-S, SARPT1S-	SSRPT1S-SH, SARPT1S-	SSRPT2S-S, SARPT2S-	SSRPT2S-SH, SARPT2S-SH,
S, SMRPT1S-S	SH, SMRPT1S-SH	S, SMRPT2S-S	SMRPT2S-SH

75.00”
190.5CM
	27.00"
	68.6CM
81.12”
206.0CM	58.00"
	147.3CM
6.12”
15.5CM

END VIEW

ALL MODELS

Mechanical Data

	MODEL NUMBER	VOLTAGE	AMPS	STORAGE	SHELVES	NO. OF	UNIT H.P.	BTU/HR SYSTEM	SHIP	NEMA	ENERGY
				CU.FT.	SQ.FT.	SHELVES		CAP	WEIGHT	PLUG	(KWH)
	SSRPT1S-S, SARPT1S-S, SMRPT1S-S	115	7.8	18.25	8.98	3	1/3	2488	455lbs	5-15P	N/A
	SSRPT1S-SH, SARPT1S-SH, SMRPT1S-SH								(206kg)
	SSRPT2S-S, SARPT2S-S, SMRPT2S-S	115	16.0	37.96	19.04	6	1/2	5465	700lbs	5-20P	N/A
	SSRPT2S-SH, SARPT2S-SH, SMRPT2S-SH								(318kg)

Delield reserves the right to make changes to the design or speciications without prior notice.

980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	Printed in the U.S.A.
Mt. Pleasant, Michigan 48858	Fax: [phone]	DSSSRPTS
	www.delfield.com	09/10