Delfield SARPT1-SH User Manual

Specication Line®

Self-Contained Solid Door Pass-Thru Refrigerator

Models

One section Two section Three section

SSRPT1-S SSRPT2-S SSRPT3-S Stainless exterior and interior full door

SSRPT1-SH SSRPT2-SH SSRPT3-SH Stainless exterior and interior half door

SARPT1-S SARPT2-S SARPT3-S Stainless exterior and aluminum interior full door

SARPT1-SH SARPT2-SH SARPT3-SH Stainless exterior and aluminum interior half door

SMRPT1-S SMRPT2-S SMRPT3-S Stainless aluminum exterior and interior full door

SMRPT1-SH SMRPT2-SH SMRPT3-SH Stainless aluminum exterior and interior half door

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

Specication Line®: Solid Door Pass-Thru Refrigerator

SSRPT2-SH

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters axed to the cabinet interior. Pilasters are
removable without tools for cleaning. Mounted to the interior ceiling,
the interior incandescent light is controlled automatically through a
switch mounted in the hinge assembly to protect against breakage.
Door openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low velocity,
even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each door
has two edge mount, self closing, cam lift style hinges. Doors can be
removed from the cabinet without the use of tools. Metal door handle

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Aluminum interior and exterior, stainless front (SM)

• Built in door locks with heavy duty strikes

• Recessed metal door handle

• Pressure relief valve is standard to prevent door

vapor lock

• Exterior digital thermometer with high/low
temperature alarm

• Easy to use electronic control

• Easy access “ip up” shroud

• Three wire shelves per section - SA/SS standard

with chrome plated shelves and SM standard with
epoxy coated shelves

• Tough ABS interior door liners

• 10’ attached cord and plug

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• High density foamed in place environmentally

friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low

• Energy savings door heater switch

• Two year parts & labor warranty

• Five year compressor warranty

shall be recessed into the door for easy grip without impacting aisle
space. Keyed door lock is mounted in the door next to the handle.
Lock engages into a heavy duty strike mounted to the cabinet face.
Door gaskets are magnetic and mount to the door snapping in place
and are removable without tools.

Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled as
one piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. The system has the capability of maintaining
between 33ºF and 40ºF in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Deleld’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reduces compressor cycling and longer
compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60 Hz single
phase. One and two section units shall be supplied with a 10’ cord and
plug attached to a junction box mounted on the exterior top of the
cabinet. Three section units will require hardwire connections.

Options &
Accessories

• Security (prison) package

• 6” polyurethane casters

• Door eld rehingability

• Stainless steel interior door liner

• Additional shelves

• Tray slides

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

• 230-50-1 electrical

• 220-60-1 electrical

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone] or 989-773-7981
Fax: [phone]

www.delfield.com

30"

58"

6.12

81.12

29.00”

73.7cm

34.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

SPECIFICATION LINE SPECIFICATION LINE

25.00"

63.5cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

30.00"

76.2cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

205.0cm

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

75.00”

190.5cm

56.00”

142.2cm

83.00”

210.8cm

SPECIFICATION LINE

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

56.00

34.00

83.00

34.00

SPECIFICATION LINE

83.00

34.00

83.00”

210.8cm

79.00"

200.7cm

34.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

36.25”

92.1cm

36.25”

92.1cm

29.00”

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

36.25”

92.1cm

36.25”

92.1cm

83.00”

210.8cm

79.00"

200.7cm

36.25”

92.1cm

73.7cm

56.00”

142.2cm

83.00”

210.8cm

SSRPT1-S, SARPT1-S, SMRPT1-S

SSRPT1-SH, SARPT1-SH, SMRPT1-SH

ELEVATION VIEW

SSRPT1-S, SARPT1-S,

SMRPT1-S

Self-Contained Solid Door Pass-Thru Refrigerator

25.00"

63.5cm

PLAN VIEW

SPECIFICATION LINE

36.25”

92.1cm

SPECIFICATION LINE

ELEVATION VIEW

SSRPT1-SH, SARPT1-SH,

SMRPT1-SH

SPECIFICATION LINE

52.00"

132.1cm

PLAN VIEW

SSRPT2-S, SARPT2-S, SMRPT2-S

SSRPT2-SH, SARPT2-SH, SMRPT2-SH

SPECIFICATION LINE

ELEVATION VIEW

SSRPT2-S, SARPT2-S,

SMRPT2-S

36.25”

92.1cm

SSRPT2-SH, SARPT2-SH,

ELEVATION VIEW

SMRPT2-SH

SPECIFICATION LINE

79.00"

200.7cm

PLAN VIEW

SSRPT3-S, SARPT3-S, SMRPT3-S

SSRPT3-SH, SARPT3-SH, SMRPT3-SH

SPECIFICATION LINE

36.25”

92.1cm

ELEVATION VIEW

SSRPT3-S, SARPT3-S, SMRPT3-S

Mechanical Data

STORAGE

MODEL NUMBER V/Hz/Ph AMPS

SSRPT1-S, SSRPT1-SH, SARPT1-S,
SARPT1-SH, SMRPT1-S, SMRPT1-SH

SSRPT2-S, SSRPT2-SH, SARPT2-S,
SARPT2-SH, SMRPT2-S, SMRPT2-SH

SSRPT3-S, SSRPT3-SH, SARPT3-S,

Specication Line®

SARPT3-SH, SMRPT3-S, SMRPT3-SH

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

115/60/1 6.8 26.64 12.81 3 1/4 2092

115/60/1 16.0 55.42 27.54 6 1/2 5465

115/60/1 16.0 84.19 42.47 9 1/2 5465

Phone: [phone] or 989-773-7981
Fax: [phone]
www.delfield.com

ELEVATION VIEW

SSRPT3-SH, SARPT3-SH, SMRPT3-SH

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

CU.FT.

Printed in the U.S.A.
DSSSRPT
08/11

81.12”

206.0cm

BTU/HR

SYSTEM CAP

75.00”

190.5cm

6.12”

15.5cm

WEIGHT

455lbs

(206kg)

700lbs

(318kg)

972lbs

(441kg)

SHIP

31.00"

78.7cm

58.00"

147.3cm

END VIEW

ALL MODELS

NEMA

PLUG

5-15P 3.14

5-20P 5.96

N/A N/A

ENERGY

(KWH)