Delfield SMR2-SL, SSR2, SAR2 User Manual

Delfield

™

®

Specication Line®

Self-Contained Sliding Door Reach-In Refrigerator

Models

Solid door Glass door

SSR2-SLS SSR2-SLG 2 section stainless exterior and interior full sliding door

SSR2-SLSH SSR2-SLGH 2 section stainless exterior and interior half sliding door

SAR2-SLS SAR2-SLG 2 section stainless exterior and aluminum interior full sliding door

SAR2-SLSH SAR2-SLGH 2 section stainless exterior and aluminum interior half sliding door

SMR2-SLS SMR2-SLG 2 section stainless front aluminum exterior and interior full sliding door

SMR2-SLSH SMR2-SLGH 2 section stainless front aluminum exterior and interior half sliding door

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity _________________ _______________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ _____________________ ___________

Specication Line®: Sliding Door Reach-In Refrigerator

SSR2-SLG

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters affixed to the cabinet interior. Pilasters
are removable without tools for cleaning. Mounted to the interior
ceiling, the interior fluorescent light is controlled automatically
through a switch mounted in the hinge assembly to protect against
breakage. Door openings are protected with heavy gauge stainless
steel breaker strips. An air duct shall be mounted to the ceiling
assuring low velocity, even air movement throughout the cabinet
interior.

Doors:

Solid Sliding. Exterior and interior shall be corrosion resistant
stainless steel.

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Aluminum interior and exterior, stainless front (SM)

• Pressure relief valve is standard to prevent door
vapor lock

• Exterior digital thermometer with high/low
temperature alarm

• Easy access “flip up” shroud

• Easy to use electronic control

• Three wire shelves per section - SA/SS standard
with chrome plated shelves and SM standard with
epoxy coated shelves

• 10’ attached cord and plug

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• Environmentally friendly 404a refrigerant
High density foamed in place environmentally

•
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low

• Energy savings door heater switch

• Fluorescent light with on/off switch (glass door
units only)
Two year parts & labor warranty

•
Five year compressor warranty

•

Glass Sliding. Double thermopane glass set in high impact black
plastic frame.

Doors are set in tracks for easy movement. Spring action assures
self closing. Gasket seals both ends of doors. Doors are removable
for cleaning.

Refrigeration system: All components are mounted to the ex terior
cabinet ceiling, outside the food zone and are assembled as one
piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. System has the capability of maintaining
between 27˚F and 40˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive ther mostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and longer
compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and operating at optimum efficienc y. Evaporator condensate
is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60Hz,
single phase. A 10’ cord and plug is supplied attached to a junction
box mounted on the exterior top of the cabinet.

Options &
Accessories

• Additional shelves

• Tray slides

• Stainless steel back

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

• 220-60-1 electrical

• 230-50-1 electrical

• Security package

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

Phone: [phone] or 989 -773-7981
Fax: [phone]

www.delfield.co m

Delfield

™

®

PLAN VIEW

56.00”

142.2cm

34.00”

86.4cm

56.00

34.00

56.00

34.00

52.00”

132.1cm

56.00

34.00

56.00”

142.2cm

34.00”

86.4cm

56.00

34.00

56.00

34.00

52.00”

132.1cm

34.00”

86.4cm

56.00”

142.2cm

34.00”

86.4cm

56.00

34.00

56.00

34.00

56.00”

142.2cm

26.00”

66.0cm

52.00”

132.1cm

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

30.00”

76.2cm

52.00”

132.1cm

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

22.00”

55.9cm

56.00”

142.2cm

34.00”

86.4cm

56.00”

142.2cm

34.00”

86.4cm

56.00

34.00

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

52.00”

132.1cm

56.00”

142.2cm

26.00”

66.0cm

52.00”

132.1cm

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

30.00”

76.2cm

52.00”

132.1cm

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

22.00”

55.9cm

56.00

34.00

56.00

34.00

ALL MODELS

Self-Contained Slid ing Door R eac h-I n Refrigerator

Specication Line®

ELEVATION VIEW

SSR2-SLSH, SAR2-SLSH, SMR2-SLSH

SSR2-SLGH, SAR2-SLGH, SMR2-SLGH

ELEVATION VIEW

END VIEW

ALL MODELS

SSR2-SLS, SAR2-SLS, SMR2-SLS

SSR2-SLG, SAR2-SLG, SMR2-SLG

ELEVATION VIEW

ELEVATION VIEW

Mechanical Data

STORAGE

CU.FT.

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

Printed in the U.S.A.
DSSSR-SL
06/08

MODEL NUMBER VOLTAGE AMPS

SSR2-SLS, SSR2-SLSH,
SAR2-SLS, SAR2-SLSH,
SMR2-SLS, SMR2-SLSH

SSR2-SLG, SSR2-SLGH,

SAR2-SLG, SAR2-SLGH,
SMR2-SLG, SMR2-SLGH

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

115 9.0 51.92 27.54 6 1/3 3226

115 9.0 51.92 27.54 6 1/3 3226

Phone: [phone] or 989 -773-7981
Fax: [phone]
www.delfield.co m

BTU/HR

SYSTEM CAP

SHIP

WEIGHT

670lbs

(304kg)

670lbs

(304kg)

NEMA

ENERGY

PLUG

(KWH)

5-15P N/A

5-15P N/A