Delfield SAR1S-S User Manual

Specication Line®

Self-Contained Solid Door Shallow Reach-In Refrigerator

Models

One section Two section

SSR1S-S SSR2S-S Stainless exterior and interior full door

SSR1S-SH SSR2S-SH Stainless exterior and interior half door

SAR1S-S SAR2S-S Stainless exterior and aluminum interior full door

SAR1S-SH SAR2S-SH Stainless exterior and aluminum interior half door

SMR1S-S SMR2S-S Stainless front aluminum exterior and interior full door

SMR1S-SH SMR2S-SH Stainless front aluminum exterior and interior half door

Specication Line®: Solid Door Shallow Reach-In Refrigerator

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

SSR2S-SH

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed oor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters axed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Aluminum interior and exterior, stainless front (SM)

• Built in door locks with heavy duty strikes

• Recessed metal door handle

• Pressure relief valve is standard to prevent door

vapor lock

• Exterior digital thermometer with high/low temperature alarm

• Easy to use electronic control

• Easy access “ip up” shroud

• Three wire shelves per section - SA/SS standard

with chrome plated shelves and SM standard with epoxy coated shelves

• Tough ABS interior door liners

• 10’ attached cord and plug on 115V units

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• High density foamed in place environmentally

friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

• Energy savings door heater switch

• Two year parts & labor warranty

• Five year compressor warranty

shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 33ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Deleld’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum eciency. Evaporator condensate is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical on one and two section units shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet.

Options & Accessories

• Security (prison) package

• 6” polyurethane casters

• Door eld rehingability

• Stainless steel interior door liner

• Additional shelves

• Stainless steel back

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

• 230-50-1 electrical

• 220-60-1 electrical

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

www.delfield.com

30"

58"

6.12

81.12

29.00”

73.7cm

34.00”

86.4cm

56.00”

142.2cm

SPECIFICATION LINE SPECIFICATION LINE

25.00"

63.5cm

52.00"

132.1cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

30.00"

76.2cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

205.0cm

29.00

34.00

56.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

75.00”

190.5cm

56.00”

142.2cm

83.00”

210.8cm

SPECIFICATION LINE

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

56.00

34.00

83.00

34.00

SPECIFICATION LINE

29.00”

26.00”

66.0cm

56.00”

142.2cm

52.00"

132.1cm

26.00”

66.0cm

48.00”

121.9cm

44.00"

111.8cm

26.00”

66.0cm

83.00”

210.8cm

79.00"

200.7cm

26.00”

66.0cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

26.00”

66.0cm

48.00”

121.9cm

44.00"

111.8cm

26.00”

66.0cm

73.7cm

56.00”

142.2cm

Self-Contained Solid Door Shallow Reach-In Refrigerator

25.00"

63.5cm

PLAN VIEW

SSR1S-S, SAR1S-S, SMR1S-S

SSR1S-SH, SAR1S-SH, SMR1S-SH

SPECIFICATION LINE

ELEVATION VIEW

SSR1S-S, SAR1S-S,

SMR1S-S

SPECIFICATION LINE

ELEVATION VIEW

SSR1S-SH, SAR1S-SH,

SMR1S-SH

52.00"

132.1cm

PLAN VIEW

SSR2S-S, SAR2S-S, SMR2S-S

SSR2S-SH, SAR2S-SH, SMR2S-SH

SPECIFICATION LINE

ELEVATION VIEW

SSR2S-S, SAR2S-S, SMR2S-S

26.00”

66.0cm

ELEVATION VIEW

SSR2S-SH, SAR2S-SH, SMR2S-SH

SPECIFICATION LINE

Mechanical Data

STORAGE

CU.FT.

MODEL NUMBER V/Hz/Ph AMPS

SSR1S-S, SSR1S-SH, SAR1S-S, SAR1S1-SH, SMR1S-S, SMR1S-SH

SSR2S-S, SSR2S-SH, SAR2S-S, SAR2S-SH, SMR2S-S, SMR2S-SH

Specication Line®

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

115/60/1 6.8 18.25 12.81 3 1/4 2092

115/60/1 7.8 37.96 27.54 6 1/3 2488

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

SHELVES SQ.FT.

NO. OF

SHELVES

Printed in the U.S.A. DSSSRS 08/11

UNIT H.P.

75.00”

81.12”

206.0cm

190.5cm

6.12”

15.5cm

22.00”

55.9cm

58.00”

147.3cm

END VIEW

SHIP

WEIGHT

396lbs

586lbs

ALL MODELS

NEMA PLUG

(KWH/Day)

5-15P 2.66

5-15P 2.98

ENERGY

BTU/HR

SYSTEM CAP

(180kg)

(266kg)