Delfield SAR1N-SH General Manual

Specication Line®

Self-Contained Solid Door Narrow Reach-In Refrigerator

Models

One section Two section

SSR1N-S SSR2N-S Stainless exterior and interior full door

SSR1N-SH SSR2N-SH Stainless exterior and interior half door

SAR1N-S SAR2N-S Stainless exterior and aluminum interior full door

SAR1N-SH SAR2N-SH Stainless exterior and aluminum interior half door

SMR1N-S SMR2N-S Stainless front aluminum exterior and interior full door

SMR1N-SH SMR2N-SH Stainless front aluminum exterior and interior half door

Specication Line®: Solid Door Narrow Reach-In Refrigerator

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity ________________ ________________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ ____________________ ____________

SSR2N-SH

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed oor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters axed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors

Standard Features

•

Stainless steel interior and exterior (SS)

•

Stainless steel exterior, aluminum interior (SA)

•

Aluminum interior and exterior, stainless front (SM)

•

Built in door locks with heavy duty strikes

•

Recessed metal door handle

•

Pressure relief valve is standard to prevent door vapor lock

•

Exterior digital thermometer with high/low temperature alarm

•

Easy to use electronic control

•

Easy access “ip up” shroud

•

Three wire shelves per section - SA/SS standard with chrome plated shelves and SM standard with epoxy coated shelves

•

Tough ABS interior door liners

•

10’ attached cord and plug

•

6” adjustable stainless steel legs

•

Stainless steel breaker strips

•

High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

•

Energy savings door heater switch

•

Two year parts & labor warranty

•

Five year compressor warranty

can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Deleld’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum eciency. Evaporator condensate is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet.

Options & Accessories

•

Security (prison) package 6” polyurethane casters Door eld rehingability Stainless steel interior door liner Additional shelves Stainless steel back Laminate on front, sides and back Bottom mount electrical Stainless steel banking strip Heat shield end Stainless steel kick plate Laminate kick plate 4” stainless steel utility base 230-50-1 electrical 220-60-1 electrical

980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8

Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619

www.delfield.co m

PLAN VIEW

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

30.00”

76.2cm

25.00”

63.5cm

34.00”

86.4cm

21.00"

53.3cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

SPECIFICATION LINE

SSR1N-S, SAR1N-S, SMR1N-S

SSR1N-SH, SAR1N-SH, SMR1N-SH

PLAN VIEW

SSR2N-S, SAR2N-S, SMR2N-S

SSR2N-SH, SAR2N-SH, SMR2N-SH

ELEVATION VIEW

SSR1N-S, SAR1N-S,

Self-Contained Solid Do or Narrow Reach -In Ref rig erato r

SMR1N-S

Mechanical Data

MODEL NUMBER VOLTAGE AMPS

Specication Line®

SSR1N-S, SSR1N-SH, SAR1N-S,

SAR1N-SH, SMR1N-S, SMR1N-SH

SSR2N-S, SSR2N-SH, SAR2N-S,

SAR2N-SH, SMR2N-S, SMR2N-SH

ELEVATION VIEW

SSR1N-SH, SAR1N-SH,

SMR1N-SH

STORAGE

CU.FT.

ELEVATION VIEW

SSR2N-S, SAR2N-S, SMR2N-S

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

115 6.8 20.97 10.59 3 1/4 2092

115 9.0 43.94 23.10 6 1/3 3226

ELEVATION VIEW

SSR2N-SH, SAR2N-SH, SMR2N-SH

END VIEW

ALL MODELS

BTU/HR

SYSTEM CAP

SHIP

WEIGHT

398lbs

(181kg)

588lbs

(267kg)

NEMA

5-15P 3.16

5-15P 4.31

PLUG

ENERGY

(KWH)

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8

Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619 www.delfield.co m

Printed in the U.S.A. DSSSRN 09/10