Delfield SAR1-GH User Manual

Specication Line®

Self-Contained Glass Door Reach-In Refrigerator

Models

One section Two section Three section

SSR1-G SSR2-G SSR3-G Stainless exterior and interior glass full door

SSR1-GH SSR2-GH SSR3-GH Stainless exterior and interior glass half door

SAR1-G SAR2-G SAR3-G Stainless exterior and aluminum interior glass full door

SAR1-GH SAR2-GH SAR3-GH Stainless exterior and aluminum interior glass half door

SMR1-G SMR2-G SMR3-G Stainless front aluminum exterior and interior glass full door

SMR1-GH SMR2-GH SMR3-GH Stainless front aluminum exterior and interior glass half door

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

Specication Line®: Glass Door Reach-In Refrigerator

SSR2-G

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters axed to the cabinet interior. Pilasters
are removable without tools for cleaning. A uorescent light is
mounted to the interior ceiling of each compartment, the switch is
part of the light assembly. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.

Doors: Double paned tempered thermopane glass. Constructed with
a combination of extruded aluminum and PVC. Each door has two
edgemount, self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle is continuous

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Aluminum interior and exterior, stainless front

(SM)

• Built in door locks with heavy duty strikes

• Pressure relief valve is standard to prevent door

vapor lock

• Exterior digital thermometer with high/low
temperature alarm

• Easy to use electronic control

• Easy access “ip up” shroud

• Three wire shelves per section - SA/SS standard

with chrome plated shelves and SM standard
with epoxy coated shelves

• 10’ attached cord and plug

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• High density foamed in place environmentally

friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low

• Energy savings door heater switch

• Two year parts & labor warranty

• Five year compressor warranty

along vertical dimension of the door. Door gaskets are magnetic and
mount to the door, snapping in place and removable with out tools.
Keyed door lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.

Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled as
one piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. The system has the capability of maintaining
between 33ºF and 40ºF in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Deleld’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reduces compressor cycling and longer
compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60 Hz single
phase. A 10’ cord and plug is supplied and attached to a junction box
mounted on the exterior top of the cabinet.

Options &
Accessories

• Security (prison) package

• 6” polyurethane casters

• Door eld rehingability

• Additional shelves

• Three drawers in lieu of one bottom

• Tray slides

• Stainless steel back

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

• 230-50-1 electrical

• 220-60-1 electrical

half height door

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone] or 989-773-7981
Fax: [phone]

www.delfield.com

29.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

83.00”

210.8cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

86.4cm

30"

58"

6.12

81.12

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

30"

58"

6.12

81.12

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

56.00

34.00

83.00

34.00

SPECIFICATION LINE

56.00

34.00

83.00

34.00

SPECIFICATION LINE

83.00

34.00

83.00

34.00

73.7cm

56.00”

142.2cm

83.00”

210.8cm

25.00"

63.5cm

PLAN VIEW

SSR1-G, SAR1-G, SMR1-G

SSR1-GH, SAR1-GH, SMR1-GH

SPECIFICATION LINE

ELEVATION VIEW

SSR1-G, SAR1-G, SMR1-G

34.00”

SPECIFICATION LINE

ELEVATION VIEW

SSR1-GH, SAR1-GH,

SMR1-GH

PLAN VIEW

SSR2-G, SAR2-G, SMR2-G

SSR2-GH, SAR2-GH, SMR2-GH

SPECIFICATION LINE

52.00"

132.1cm

ELEVATION VIEW

SSR2-G, SAR2-G, SMR2-G

79.00"

200.7cm

PLAN VIEW

SSR3-G, SAR3-G, SMR3-G

SSR3-GH, SAR3-GH, SMR3-GH

SPECIFICATION LINE

ELEVATION VIEW

SSR2-GH, SAR2-GH, SMR2-GH

SPECIFICATION LINE

SPECIFICATION LINE

34.00”

81.12”

206.0cm

SHIP WEIGHT

75.00”

190.5cm

6.12”

15.5cm

30.00”

76.2cm

END VIEW

ALL MODELS

NEMA

PLUG

58.00”

147.3cm

ENERGY

(KWH/Day)

Self-Contained Glass Door Reach-In Refrigerator

ELEVATION VIEW

Mechanical Data

MODEL NUMBER V/Hz/Ph AMPS

SSR1-G, SAR1-G, SMR1-G

SSR1-GH, SAR1-GH, SMR1-GH

SSR2-G, SAR2-G, SMR2-G

SSR2-GH, SAR2-GH, SMR2-GH

SSR3-G, SAR3-G, SMR3-G

SSR3-GH, SAR3-GH, SMR3-GH

Specication Line®

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

SSR3-G, SAR3-G, SMR3-G

STORAGE

SHELVES

CU.FT.

115/60/1 6.0 24.96 12.81 3 1/4 2092 418lbs (190kg) 5-15P 3.98

115/60/1 6.0 24.96 12.81 3 1/4 2092 418lbs (190kg) 5-15P 3.93

115/60/1 9.5 51.92 27.54 6 1/3 3226 650lbs (295kg) 5-15P 5.51

115/60/1 9.5 51.92 27.54 6 1/3 3226 650lbs (295kg) 5-15P 6.22

115/60/1 14.5 78.89 42.47 9 1/2 5465 830lbs (376kg) 5-20P 8.44

115/60/1 14.5 78.89 42.47 9 1/2 5465 830lbs (376kg) 5-20P 9.37

Phone: [phone] or 989-773-7981
Fax: [phone]
www.delfield.com

ELEVATION VIEW

SSR3-GH, SAR3-GH, SMR3-GH

NO. OF

SQ.FT.

SHELVES

Printed in the U.S.A.
DSSSR-G
08/11

BTU/HR

SYSTEM CAP

UNIT H.P.