Delfield SAHPT1-S General Manual

Delfield
™	®	Project ___________________________________
		Item _____________________________________
Specification Line®		Quantity _ ________________________________
		Date _____________________________________
		CSI Section 11400
		Approved _ _______________________________
Self-Contained Solid Door Heated Pass-Thru

Models

One section	Two section
SSHPT1-S	SSHPT2-S
SSHPT1-SH	SSHPT2-SH
SAHPT1-S	SAHPT2-S
SAHPT1-SH	SAHPT2-SH
SMHPT1-S	SMHPT2-S
SMHPT1-SH	SMHPT2-SH

Stainless exterior and interior full door

Stainless exterior and interior half door

Stainless exterior and aluminum interior full door Stainless exterior and aluminum interior half door Stainless front aluminum exterior and interior full door Stainless front aluminum exterior and interior half door

Standard Features

	• Stainless steel interior and exterior (SS)
	• Stainless steel exterior, aluminum interior
	(SA)
	• Aluminum interior and exterior, stainless
	front (SM)
	• Built in door locks with heavy duty strikes
	• Recessed metal door handle
	• Exterior digital thermometer with high/low
	temperature alarm
	• Easy to use electronic control
	• Easy access “flip up” shroud
	• High density foamed in place
	environmentally friendly, Kyoto Protocol
	Compliant, Non ODP (Ozone Depletion
	Potential), Non GWP (Global Warming
	Potential) polyurethane keeps energy costs
	low
	• Three chrome plated wire shelves per section
SSHPT2-SH	• 6” adjustable stainless steel legs
	• Stainless steel breaker strips
	• Stainless steel interior door liner
	• Two year parts & labor warranty

Options &

Accessories

•Security (prison) package

•6” polyurethane casters

•Door field rehingability

•Additional shelves

•Tray slides

•Laminate on front, sides and back

•Bottom mount electrical

•Stainless steel banking strip

•Heat shield end

•Stainless steel kick plate

•Laminate kick plate

•4” stainless steel utility base

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be stainless steel. Each door has two edge mount, self

closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Heating system: Cabinets are designed to maintain temperatures between 120ºF and 200ºF. Heating elements are helical shaped, with tubular fins. High speed blower provides uniform airflow in the cabinet. Entire heating system is mounted to the exterior of the cabinet ceiling, outside the food zone. It is assembled as one piece and can be removed as one piece. Temperature is controlled by an adjustable electronic thermostat. System on/off switch is located on the front exterior of the cabinet.

Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase. Connection must be hard wired to junction box on the exterior top of the cabinet.

<![if ! IE]>

<![endif]>Thru-Pass Heated Door Solid Line®: Specification

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	www.delfield.com
	Mt. Pleasant, Michigan 48858
		Fax: [phone]

Delfield™ ®

<![if ! IE]>

<![endif]>Specification Line® Self-Contained Solid Door Heated Pass-Thru

	29.00”		56.00”
	73.7cm		142.2cm
	25.00"	36.25”	52.00"	36.25”
	63.5cm		132.1cm
		92.1cm		92.1cm

PLAN VIEW

PLAN VIEW

SSHPT1-S, SAHPT1-S, SMHPT1-S

SSHPT2-S, SAHPT2-S, SMHPT2-S

SSHPT1-SH, SAHPT1-SH, SMHPT1-SH

SSHPT2-SH, SAHPT2-SH, SMHPT2-SH

ELEVATION VIEW	ELEVATION VIEW	ELEVATION VIEW	ELEVATION VIEW
SSHPT1-S, SAHPT1-S,	SSHPT1-SH, SAHPT1-SH,	SSHPT2-S, SAHPT2-S,	SSHPT2-SH, SAHPT2-SH,
SMHPT1-S	SMHPT1-SH	SMHPT2-S	SMHPT2-SH

75.00”

190.5cm

31.00" 78.7cm

81.12”

206.0cm 58.00" 147.3cm

6.12”

15.5cm

END VIEW

ALL SECTION UNITS

Mechanical Data

	MODEL NUMBER	VOLTAGE	AMPS	STORAGE	SHELVES SQ.FT.	NO. OF SHELVES	UNIT H.P.	BTU/HR	SHIP	NEMA	ENERGY
				CU.FT.				SYSTEM CAP	WEIGHT	PLUG	(KWH)
	SSHPT1-S, SSHPT1-SH,								398lbs
	SAHPT1-S, SAHPT1-SH,	120/208-240	9.0	26.96	12.81	3	N/A	N/A		N/A	N/A
									(181kg)
	SMHPT1-S, SMHPT1-SH
	SSHPT2-S, SSHPT2-SH,								650lbs
	SAHPT2-S, SAHPT2-SH,	120/208-240	16.0	51.92	27.54	6	N/A	N/A		N/A	N/A
									(295kg)
	SMHPT2-S, SMHPT2-SH

Delfield reserves the right to make changes to the design or specifications without prior notice.

980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	Printed in the U.S.A.
Mt. Pleasant, Michigan 48858	Fax: [phone]	DSSSHPT
	www.delfield.com	09/08