Delfield SAH1-G General Manual

 

 

 

 

 

 

Project ___________________________________

 

 

 

 

 

 

Item _____________________________________

Specification Line®

 

 

Quantity _ ________________________________

 

 

Date _____________________________________

 

 

 

 

 

 

CSI Section 11400

 

 

 

 

 

 

Approved _ _______________________________

Self-Contained Glass Door Heated Reach-In

 

 

 

 

 

 

 

 

 

 

 

 

Models

 

 

 

 

 

 

One section

Two section

Three section

 

 

 

 

SSH1-G

SSH2-G

SSH3-G

Stainless exterior and interior glass full door

 

SSH1-GH

SSH2-GH

SSH3-GH

Stainless exterior and interior glass half door

 

SAH1-G

SAH2-G

SAH3-G

Stainless exterior and aluminum interior glass full door

 

SAH1-GH

SAH2-GH

SAH3-GH

Stainless exterior and aluminum interior glass half door

 

SMH1-G

SMH2-G

SMH3-G

Stainless front aluminum exterior and interior glass full door

 

SMH1-GH

SMH2-GH

SMH3-GH

Stainless front aluminum exterior and interior glass half door

 

Standard Features

 

• Stainless steel interior and exterior (SS)

 

• Stainless steel exterior, aluminum interior

 

(SA)

 

• Aluminum interior and exterior, stainless

 

front (SM)

 

• Built in door locks with heavy duty strikes

 

• Exterior digital thermometer with high/low

 

temperature alarm

 

• Easy to use electronic control

 

• Easy access “flip up” shroud

 

• High density foamed in place

 

environmentally friendly, Kyoto Protocol

 

Compliant, Non ODP (Ozone Depletion

 

Potential), Non GWP (Global Warming

 

Potential) polyurethane keeps energy costs

 

low

 

• Three chrome plated wire shelves per section

 

• 6” adjustable stainless steel legs

SSH1-G

• Stainless steel breaker strips

 

• Stainless steel interior door liner

 

• Two year parts & labor warranty

Options &

Accessories

Security (prison) package

6” polyurethane casters

Incandescent light

Door field rehingability

Additional shelves

Tray slides

Stainless steel back

Laminate on front, sides and back

Bottom mount electrical

Stainless steel banking strip

Heat shield end

Stainless steel kick plate

Laminate kick plate

4” stainless steel utility base

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Double paned tempered thermopane glass. Constructed with a combination of extruded aluminum and PVC. Each door has two

edgemount, self-closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Door handle is continuous along vertical dimension of the door. Door gaskets are magnetic and mount to the door, snapping in place and removable with out tools. Keyed door lock is mounted to the door. Lock engages into a heavy duty strike mounted to the cabinet face.

Heating system: Cabinets are designed to maintain temperatures between 120ºF and 200ºF. Heating elements are helical shaped, with tubular fins. High speed blower provides uniform airflow in the cabinet. Entire heating system is mounted to the exterior of the cabinet ceiling, outside the food zone. It is assembled as one piece and can be removed as one piece. Temperature is controlled by an adjustable electronic thermostat. System on/off switch is located on the front exterior of the cabinet.

Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase. Connection must be hard wired to junction box on the exterior top of the cabinet.

980 S. Isabella Rd.

Phone: 800-733-8948 or 989-773-7981

www.delfield.com

Mt. Pleasant, Michigan 48858

Fax: 800-669-0619

 

 

 

 

 

<![if ! IE]>

<![endif]>In-Reach Heated Door Glass Line®: Specification

Delfield SAH1-G General Manual

 

29.00”

 

 

 

56.00”

 

 

 

 

83.00”

 

 

 

 

73.7cm

 

 

 

142.2cm

 

 

 

 

210.8cm

 

 

 

 

25.00"

 

 

 

52.00"

 

34.00”

 

 

79.00"

 

 

34.00”

 

 

 

 

132.1cm

 

 

 

 

 

 

63.5cm

34.00”

 

 

 

 

 

200.7cm

 

 

86.4cm

 

 

 

 

 

86.4cm

 

 

 

 

 

 

 

86.4cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAN VIEW

 

 

 

PLAN VIEW

 

 

 

PLAN VIEW

 

 

 

 

SSH1-G, SAH1-G, SMH1-G

 

SSH2-G, SAH2-G, SMH2-G

 

 

SSH3-G, SAH3-G, SMH3-G

 

 

 

SSH1-GH, SAH1-GH, SMH1-GH

 

SSH2-GH, SAH2-GH, SMH2-GH

 

SSH3-GH, SAH3-GH, SMH3-GH

 

 

<![if ! IE]>

<![endif]>Glass Door Heated Reach-In

 

 

 

 

 

 

 

 

 

 

 

 

 

<![if ! IE]>

<![endif]>Self-Contained

ELEVATION VIEW

ELEVATION VIEW

 

ELEVATION VIEW

 

ELEVATION VIEW

 

 

 

SSH1-G, SAH1-G, SMH1-G SSH1-GH, SAH1-GH, SMH1-GH

 

SSH2-G, SAH2-G, SMH2-G

SSH2-GH, SAH2-GH, SMH2-GH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<![if ! IE]>

<![endif]>Line®

 

 

 

 

 

 

 

 

 

 

75.00”

 

 

 

 

 

 

 

 

 

 

 

 

190.5cm

30.00”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

76.2cm

 

 

 

 

 

 

 

 

 

 

 

 

58.00”

 

 

 

 

 

 

 

 

 

81.12”

 

147.3cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

206.0cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<![if ! IE]>

<![endif]>Specification

 

 

 

 

 

 

 

 

 

 

6.12”

 

 

 

 

 

 

 

 

 

 

 

 

15.5cm

 

 

 

ELEVATION VIEW

 

 

 

ELEVATION VIEW

 

 

 

END VIEW

SSH3-G, SAH3-G, SMH3-G

 

 

 

SSH3-GH, SAH3-GH, SMH3-GH

 

 

ALL SECTION UNITS

Mechanical Data

 

 

STORAGE

 

 

 

BTU/HR

SHIP

NEMA

ENERGY

MODEL NUMBER

 

 

VOLTAGE

AMPS

SHELVES SQ.FT.

NO. OF SHELVES

UNIT H.P.

 

 

CU.FT.

SYSTEM CAP

WEIGHT

PLUG

(KWH)

 

 

 

 

 

 

 

 

SSH1-G, SSH1-GH, SAH1-G,

120/208-240

9.0

24.96

12.81

3

N/A

N/A

418lbs

N/A

N/A

SAH1-GH, SMH1-G, SMH1-GH

(190kg)

 

 

 

 

 

 

 

 

 

SSH2-G, SSH2-GH, SAH2-G,

120/208-240

16.0

51.92

27.54

6

N/A

N/A

650lbs

N/A

N/A

SAH2-GH, SMH2-G, SMH2-GH

(295kg)

 

 

 

 

 

 

 

 

 

SSH3-G, SSH3-GH, SAH3-G,

120/208-240

17.8

78.89

42.47

9

N/A

N/A

830lbs

N/A

N/A

SAH3-GH, SMH3-G, SMH3-GH

(376kg)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Delfield reserves the right to make changes to the design or specifications without prior notice.

980 S. Isabella Rd.

Phone: 800-733-8948 or 989-773-7981

Printed in the U.S.A.

Mt. Pleasant, Michigan 48858

Fax: 800-669-0619

DSSSH-G

 

www.delfield.com

07/10

 

 

 

Loading...